# Invocation command line:
# /scratch911/hideki/spec2000-Formal-32/bin/runspec --config=Asama_linux32-again --tune=base --size=ref --reportable --rate --users 32 fp
############################################################################
# intel_linux config file

#####################################################
# System Description

hw_avail        = Aug-2002
hw_model        = TX7/i9510(1000MHz, Itanium 2)
machine_name    = 
hw_memory       = 64GB
hw_disk         = 3x32GB + 11x73GB SCSI disk
hw_other        = Ethernet
hw_vendor       = NEC Corporation
company_name    = NEC Corporation
sw_avail        = Nov-2002


# CPU description

hw_cpu          = Itanium2
hw_cpu_mhz      = 1000
hw_fpu          = Integrated
hw_ncpu         = 32
hw_ncpuorder    = 1-32
hw_parallel     = No
hw_pcache       = 16KBI + 16KBD on chip
hw_scache       = 256KB on chip
hw_tcache       = 3MB on chip
hw_ocache       = None

# Tester description - edit the date, put your license number here!

test_date       = Dec-2002
license_num     = 1184
prepared_by     =
tester_name     = NEC  T.Kokubo

# Operating system, file system

sw_os           = NEC IA-64 Linux R3.2
sw_file         = ext2
sw_state        = Multi-user
sw_compiler     = NEC FORTRAN95 R3.2
sw_compiler2    = NEC C/C++ R3.2




## NOTE
notes00         = Base tuning:
notes01         =    Fortran:    -O3 -ipo -ftz  +FDO
notes02         =    C:          -O3 -ipo -ftz  +FDO
notes03         = +FDO:
notes04         =    PASS1:      -prof_gen
notes05         =    PASS2:      -prof_use 
notes06         = Portability:  
notes07         =    178.galgel: -FI


#
#####################################################


ext=Itanium2_linux
     
teeout=yes
teerunout=yes;
     

default=default=default=default:
     
CC=ecc
FC=efc
CXX=ecc
EXTRA_FFLAGS= 

OPTIMIZE   =  -O3 -ipo -ftz -prof_dir/tmp/spec/$(EXEBASE) 
fdo_pre0     = mkdir -p /tmp/spec; rm -rf /tmp/spec/${baseexe}; mkdir /tmp/spec/${baseexe}
PASS1_CFLAGS = -prof_gen
PASS2_CFLAGS = -prof_use 
PASS1_FFLAGS = ${PASS1_CFLAGS}
PASS2_FFLAGS = ${PASS2_CFLAGS} 



164.gzip=default=default=default:
EXTRA_CFLAGS=
     
175.vpr=default=default=default:
EXTRA_CFLAGS=
     
176.gcc=default=default=default:
EXTRA_CFLAGS=

181.mcf=default=default=default:
EXTRA_CFLAGS=
     
186.crafty=default=default=default:
EXTRA_CFLAGS=-DLINUX_ITANIUM2
     
194.sim96=default=default=default:
EXTRA_CFLAGS=
     
197.parser=default=default=default:
EXTRA_CFLAGS=
     
252.eon=default=default=default:
EXTRA_CXXFLAGS=-DSPEC_CPU2000_LP64 -DHAS_ERRLIST -DFMAX_IS_DOUBLE
OPTIMIZE=-O3
     
253.perlbmk=default=default=default: 
EXTRA_CFLAGS=-DSPEC_CPU2000_LP64 -DSPEC_CPU2000_LINUX_ITANIUM2  -DSPEC_CPU2000_LINUX_IA64  -DSPEC_CPU2000_NEED_BOOL
     
254.gap=default=default=default:
EXTRA_CFLAGS= -DSPEC_CPU2000_LP64 -DSYS_HAS_CALLOC_PROTO -DSYS_HAS_IOCTL_PROTO -DSYS_IS_USG -DSYS_HAS_TIME_PROTO 

255.vortex=default=default=default:
EXTRA_CFLAGS= -DSPEC_CPU2000_LP64

256.bzip2=default=default=default: 
EXTRA_CFLAGS=
     
300.twolf=default=default=default: 
EXTRA_CFLAGS=
#
#	fp flags
#
168.wupwise=default=default=default:

171.swim=default=default=default:

172.mgrid=default=default=default:

173.applu=default=default=default:

177.mesa=default=default=default:

179.art=default=default=default:

183.equake=default=default=default:

188.ammp=default=default=default:

190.gafort=default=default=default:

200.sixtrack=default=default=default:

301.apsi=default=default=default:
     
#
# F90 benchmarks
#
# As of August 1999,
# g77 will not compile the Fortran 90 codes in SPECfp2000
# Therefore no valid SPECfp2000 result can be obtained unless
# an f90 compiler is installed.
#
178.galgel=default=default=default:
EXTRA_FFLAGS = -FI


187.facerec=default=default=default: 
EXTRA_F90FLAGS= 
     
189.lucas=default=default=default:
EXTRA_F90FLAGS=
     
191.fma3d=default=default=default:
EXTRA_F90FLAGS=