# Invocation command line:
# /usr/spec2000/bin/runspec -a validate -T all -v 6 -n 3 -s -r -u 2 -c /tmp/specdriver-139360.tmp7 fp
############################################################################
################################################################################
# SPEC CPU2000 Benchmark Config file IBM RS/6000 AIX
# Last Changed: 9.20.01
################################################################################
#===============================================================================
# Global Options apply to all runs
#===============================================================================
VENDOR = ibm
action = validate
tune = all
output_format = all
runout = yes
teeout = yes
ext = colt.f711.cpp5020
basepeak=0
#--number of times each test will be run (reportable must be and odd num >= 3)
iterations = 3
Mean_anyway = 0
ignore_errors = 0
#--turn on both of the following for reportable (non-test) runs
reportable = 1
check_md5 = 1
#--prevent log file lines that are too long for vi
log_line_width = 156
#--the directory where pdf data will go, be sure to tell the compiler
#---where this is (eg: export PDFDIR="/tmp/pdfdir" for IBM compilers)
PDFDIR=/tmp/pdfdir
#===============================================================================
#===============================================================================
company_name = IBM Corporation
machine_name =
hw_vendor = IBM Corporation
hw_model = IBM eServer pSeries 620 Model 6E1
hw_cpu = POWER3-II
hw_cpu_mhz = 450
hw_fpu = Integrated
hw_ncpu = 4
hw_ncpuorder = 1,2
hw_pcache = 32KBI+64KBD (on chip)
hw_scache = 8MB unified (off chip)
hw_tcache = None
hw_ocache = None
hw_parallel = No
hw_memory = 2GB
hw_disk = 2x18GB 10000RPM
hw_other = None
hw_avail = Oct-2001
sw_os = AIX 5.1.0
sw_file = AIX/JFS
sw_state = Multi-user
sw_avail = Dec-2001
license_num = 11
tester_name = IBM Corp.
test_date = Sept-2001
#---------------------------------
# Floating point specific notes
#---------------------------------
fp=default=default=default:
sw_compiler01 = Fortran 77 and 90: IBM xl Fortran 7.1.1 invoked
sw_compiler02 = as "xlf90"for Fortran 90 and as xlf for Fortran 77
sw_compiler03 = C: IBM VAC++ 5.0.2.0 invoked as "xlc"
notes001 = Portability Flags
notes002 = -qfixed used in: wupwise, swim, mgrid, applu, galgel, sixtrack, apsi
notes003 = -qsuffix=f=f90 used in: galgel, facerec, lucas, fma3d
notes004 = Base Optimization Flags:
notes005 = Fortran: -O5 -lmass
notes006 = C: -O5 -lmass
notes007 = Peak Optimization Flags
notes008 = 168.wupwise: (basepeak=1)
notes009 = 171.swim: -qpdf1/pdf2 -O5 -lmass
notes010 = 172.mgrid: (basepeak=1)
notes011 = 173.applu: -O5 -lmass -qipa=partition=large
notes012 = 177.mesa: -O5 -lmass -qipa=partition=large, fdpr -v -R3
notes013 = 178.galgel: (basepeak=1)
notes014 = 179.art: -O5 -lmass -qalign=natural
notes015 = 183.equake: -O5 -lmass -lhmu -qinline
notes016 = 187.facerec: (basepeak=1)
notes018 = 188.ammp: -O3 -qarch=pwr3
notes019 = 189.lucas: -qpdf1/pdf2 -O3 -lhmu -lmass
notes020 = -qipa=partition=large, fdpr -v -R3
notes021 = 191.fma3d: -O4 -lmass -qipa=partition=large
notes022 = 200.sixtrack: (basepeak=1)
notes023 = 301.apsi: (basepeak=1)
notes024 = fpdr: Feedback directed program restructuring tool
notes029 = /usr/spec2000 filesystem mounted with no JFS log file I/O
notes030 = APAR IY 21957 was applied to AIX 5.1.0 to enable new hardware support
#---------------------------------
# iNteger specific notes
#---------------------------------
int=default=default=default:
sw_compiler01 = C: IBM VAC++ 5.0.2.0 invoked as "cc" except where noted
sw_compiler02 = as "xlc"
sw_compiler03 = C++: IBM VAC++ 5.0.2.0 invoked as "xlC"
notes001 = Portability Flags:
notes002 = gcc: -ma -qlanglvl=ansi -DHOST_WORDS_BIG_ENDIAN
notes003 = crafty: -DAIX
notes004 = eon: -DNEED_EXPLICIT_SPECIALIZATION
notes005 = perlbmk: -DSPEC_CPU2000_AIX
notes006 = gap: -DSYS_IS_BSD -DSYS_STRING_H -DSYS_HAS_TIME_PROTO
notes007 = -DSYS_HAS_MALLOC_PROTO -DSYS_HAS_CALLOC_PROTO
notes008 = twolf: -DHAVE_SIGNED_CHAR
notes009 = Base Optimization Flags:
notes010 = C: -O4 -lmass fdpr -v -R3
notes011 = C++: -O4 -lmass fdpr -v -R3
notes012 = Peak Optimization Flags
notes013 = 164.gzip: -O4 -lhmu, fdpr -v -R3
notes014 = 175.vpr: -O5 -qunroll=8
notes015 = 176.gcc: (basepeak=1)
notes016 = 181.mcf: -O5
notes017 = 186.crafty: -O3 -lhmu -q64
notes018 = 197.parser: -qpdf1/pdf2 -O4
notes019 = -bnso -bI:/lib/syscalls.exp, fdpr -v -R3
notes020 = 252.eon: -O4 -lmass, fdpr -v -R3
notes021 = 253.perlbmk: -qpdf1/pdf2 -O3 -lhmu -qarch=pwr3 -qdatalocal
notes022 = -qunroll=8, fdpr -v -R3
notes023 = 254.gap: -O4 -qarch=pwr3, fdpr -v -R3
notes024 = 255.vortex: -O3 -lhmu -lmass -qipa=partition=large,
notes025 = fdpr -v -R3
notes026 = 256.bzip2: -O5 -qunroll=8, fdpr -v -R3
notes027 = 300.twolf: -qpdf1/pdf2 -O5, fdpr -v -R3
notes028 = fpdr: Feedback directed program restructuring tool
notes029 = /usr/spec2000 filesystem mounted with no JFS log file I/O
notes030 = APAR IY 21957 was applied to AIX 5.1.0 to enable new haredwaresupport
################################################################################
################################################################################
###### ######
###### DO NOT EDIT BELOW THIS BLOCK ######
###### (unless you are prepared to build new binaries) ######
###### ######
################################################################################
################################################################################
#===============================================================================
# How the compilers are called
# The settings used here are for IBM C/C++ and xl Fortran compilers
#===============================================================================
fp=default=default=default:
CC = /usr/vacpp/bin/xlc
FC = xlf90
F77 = xlf
int=default=default=default:
CC = /usr/vacpp/bin/cc
CXX = /usr/vacpp/bin/xlC
#===============================================================================
# Base Level Optimizations
# Limited to 4 flags
#===============================================================================
#------------------------
# Floating Point
#------------------------
fp=base=default=default:
FOPTIMIZE =-O5 -lmass
COPTIMIZE =-O5 -lmass
#------------------------
# Integer
#------------------------
int=base=default=default:
COPTIMIZE=-O4 -lmass
#--C flags no feedback
#--C++ flags w/feedback
fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR}
CXXOPTIMIZE=-O4 -lmass
fdo_run2 = fdpr -v -R3 -p $commandexe -x $command
fdo_post2 = cp ${baseexe}.fdpr $baseexe
#===============================================================================
# Floating Point Portability Flags
# no optimizations allowed here
#===============================================================================
168.wupwise=default=default=default:
EXTRA_FFLAGS=-qfixed
171.swim=default=default=default:
EXTRA_FFLAGS=-qfixed
172.mgrid=default=default=default:
EXTRA_FFLAGS=-qfixed
173.applu=default=default=default:
EXTRA_FFLAGS=-qfixed
178.galgel=default=default=default:
EXTRA_FFLAGS=-qfixed -qsuffix=f=f90
187.facerec=default=default=default:
EXTRA_FFLAGS=-qsuffix=f=f90
189.lucas=default=default=default:
EXTRA_FFLAGS=-qsuffix=f=f90
191.fma3d=default=default=default:
EXTRA_FFLAGS= -qsuffix=f=f90
200.sixtrack=default=default=default:
EXTRA_FFLAGS=-qfixed
301.apsi=default=default=default:
EXTRA_FFLAGS=-qfixed
#===============================================================================
# Integer Portability Flags
# no optimizations allowed here
#===============================================================================
176.gcc=default=default=default:
EXTRA_CFLAGS=-ma -qlanglvl=ansi -DHOST_WORDS_BIG_ENDIAN
186.crafty=default=default=default:
EXTRA_CFLAGS=-DAIX
252.eon=default=default=default:
EXTRA_CXXFLAGS=-DNEED_EXPLICIT_SPECIALIZATION
253.perlbmk=default=default=default:
EXTRA_CFLAGS=-DSPEC_CPU2000_AIX
254.gap=default=default=default:
EXTRA_CFLAGS=-DSYS_IS_BSD -DSYS_STRING_H -DSYS_HAS_TIME_PROTO -DSYS_HAS_MALLOC_PROTO -DSYS_HAS_CALLOC_PROTO
300.twolf=default=default=default:
EXTRA_CFLAGS=-DHAVE_SIGNED_CHAR
#===============================================================================
# Integer peak optimization flags
#===============================================================================
164.gzip=peak=default=default:
COPTIMIZE=-O4 -lhmu
fdo_run1 = fdpr -v -R3 -p $commandexe -x $command
fdo_post1 = cp ${baseexe}.fdpr $baseexe
175.vpr=peak=default=default:
COPTIMIZE=-O5 -qunroll=8
176.gcc=peak=default=default:
basepeak = 1
181.mcf=peak=default=default:
COPTIMIZE=-O5
186.crafty=peak=default=default:
COPTIMIZE=-O3 -lhmu -q64
197.parser=peak=default=default:
fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR}
PASS1_CFLAGS=-qpdf1 -O4
PASS1_LDFLAGS=-O4 -lpdf -L/usr/vac/lib -bnso -bI:/lib/syscalls.exp
PASS2_CFLAGS=-qpdf2 -O4
PASS2_LDFLAGS=-O4 -bnso -bI:/lib/syscalls.exp
fdo_run2 = fdpr -v -R3 -p $commandexe -x $command
fdo_post2 = cp ${baseexe}.fdpr $baseexe
252.eon=peak=default=default:
fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR}
CXXOPTIMIZE=-O4 -lmass
fdo_run2 = fdpr -v -R3 -p $commandexe -x $command
fdo_post2 = cp ${baseexe}.fdpr $baseexe
253.perlbmk=peak=default=default:
fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR}
PASS1_CFLAGS =-qpdf1 -O3 -qarch=pwr3 -qdatalocal -qunroll=8
PASS1_LDCFLAGS =-lhmu -lpdf -L/usr/vac/lib
PASS2_CFLAGS =-qpdf2 -O3 -qarch=pwr3 -qdatalocal -qunroll=8
PASS2_LDCFLAGS =-lhmu
fdo_run2 = fdpr -v -R3 -p $commandexe -x $command
fdo_post2 = cp ${baseexe}.fdpr $baseexe
254.gap=peak=default=default:
COPTIMIZE=-O4 -qarch=pwr3
fdo_run1 = fdpr -v -R3 -p $commandexe -x $command
fdo_post1 = cp ${baseexe}.fdpr $baseexe
255.vortex=peak=default=default:
fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR}
COPTIMIZE=-O3 -lhmu -lmass -qipa=partition=large
fdo_run1 = fdpr -v -R3 -p $commandexe -x $command
fdo_post1 = cp ${baseexe}.fdpr $baseexe
256.bzip2=peak=default=default:
COPTIMIZE=-O5 -qunroll=8
fdo_run1 = fdpr -v -R3 -p $commandexe -x $command
fdo_post1 = cp ${baseexe}.fdpr $baseexe
300.twolf=peak=default=default:
fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR}
CC=/usr/vac/bin/xlc
PASS1_FLAGS=-qpdf1 -O5
PASS1_LDFLAGS=-O5 -L/usr/vac/lib -lpdf
PASS2_FLAGS=-qpdf2 -O5
PASS2_LDFLAGS=-O5
fdo_run2 = fdpr -v -R3 -p $commandexe -x $command
fdo_post2 = cp ${baseexe}.fdpr $baseexe
#===============================================================================
# Floating Point peak optimization flags
#===============================================================================
default=peak=default=default:
EXTRA_F77FLAGS =-qfixed
168.wupwise=peak=default=default:
basepeak = 1
171.swim=peak=default=default:
basepeak = 1
172.mgrid=peak=default=default:
basepeak = 1
173.applu=peak=default=default:
F77OPTIMIZE =-O5 -lmass -qipa=partition=large
177.mesa=peak=default=default:
COPTIMIZE = -O5 -lmass -qipa=partition=large
fdo_run1 = fdpr -v -R3 -p $commandexe -x $command
fdo_post1 = cp ${baseexe}.fdpr $baseexe
178.galgel=peak=default=default:
basepeak = 1
179.art=peak=default=default:
COPTIMIZE = -O5 -lmass -qalign=natural
183.equake=peak=default=default:
CC=/usr/vac/bin/xlc
COPTIMIZE = -O5 -lmass -lhmu -qinline
187.facerec=peak=default=default:
basepeak = 1
# return to spec below if you change the base flags...
188.ammp=peak=default=default:
COPTIMIZE =-O3 -qarch=pwr3
189.lucas=peak=default=default:
fdo_pre0 = rm -rf ${PDFDIR}; mkdir -p ${PDFDIR}
PASS1_FFLAGS =-qpdf1 -O3 -lhmu -lmass -qipa=partition=large
PASS1_LDFFLAGS =-lhmu -lmass -lpdf -L/usr/lpp/xlf/lib/pdf -qipa=partition=large
PASS2_FFLAGS =-qpdf2 -O3 -lhmu -lmass -qipa=partition=large
PASS2_LDFFLAGS =-lhmu -lmass -qipa=partition=large
fdo_run2 = fdpr -v -R3 -p $commandexe -x $command
fdo_post2 = cp ${baseexe}.fdpr $baseexe
191.fma3d=peak=default=default:
FOPTIMIZE =-O4 -lmass -qipa=partition=large
200.sixtrack=peak=default=default:
basepeak = 1
301.apsi=peak=default=default:
basepeak = 1