# Invocation command line: # /home/cpu119/bin/harness/runcpu --configfile amd_speed_aocc400_znver4_A1.cfg --tune base --reportable --iterations 3 --nopower --runmode speed --tune base --size test:train:refspeed fpspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 400 SPEC CPU 2017 V1.1.9 Speed Configuration File for 64-bit Linux # # File name : amd_speed_aocc400_znver4_A1.cfg # Creation Date : April 16, 2023 # CPU 2017 Version : 1.1.9 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC 4.0.0 # Operating system version : RHEL 8.6 # Supported OS's : Ubuntu 22.04, RHEL 8.6/9, SLE 15 SP4 # Hardware : AMD znver4 (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 64-bit # Auto Parallelization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_speed_aocc400_znver4_A1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU 2017 under optimized conditions on AMD znver4-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD znver4 microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_speed_aocc400_znver4_A1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on one socket AMD # znver4-based servers with 96 cores, SMT enabled and 768 (64x12) GB of DDR5 # memory distributed evenly among all 12 channels using 64 GiB DIMMs. # # To run the binary package on other znver4 configurations, please review # "Readme.amd_speed_aocc400_znver4_A1.txt". In general, znver4 CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_speed_aocc400_znver4_A1.cfg" or any # other file besides "ini_amd_speed_aocc400_znver4_A1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of speed copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 22.04, RHEL 8.6/9, and SLE 15 SP4. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Modifiable macros: ################################################################################ # "allow_build"" switch: # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc400 %define binary_package_name amd_speed_%{compiler_name}_znver4_A %define binary_package_ext %{binary_package_name} %define binary_package_revision 1 %define build_path ${SPEC} %define flags_file_name %{compiler_name}-flags.xml # Do NOT change build_lib_dir after the build or it will trigger a # rebuild of the xalanc. It should also remain literal: %define build_lib_dir amd_speed_aocc400_znver4_A_lib # To enable the platform file, be sure to uncomment the flagsurl02 header line # below in the Header settings. %define platform_file_name INVALID_platform_%{binary_package_name}.xml ################################################################################ # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name %{binary_package_full_name}.inc %define flags_inc_file_name %{binary_package_full_name}_flags.inc # Binary label extension: # Only modify the binary label extension if you plan to rebuild the binaries. # If you plan to recompile these CPU 2017 binaries, please choose a new extension # name below to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true above. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Note that AMD calls an external script to set up the compiler and library # paths before initiating the build. %define ext %{binary_package_ext} ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # retain:true is necessary to avoid gcc out-of-memory exceptions on certain SUTs: # oversize_threshold is required to support jemalloc 5.2.x+ preENV_MALLOC_CONF = oversize_threshold:0,retain:true preENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 0 # OpenMP environment variables: preENV_OMP_SCHEDULE = static preENV_OMP_DYNAMIC = false preENV_OMP_STACKSIZE = 128M # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/lib:%{ENV_LD_LIBRARY_PATH} %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_znver4_A1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_speed_aocc400_znver4_A1.inc # File generation code date: October 11, 2022 # File generation date/time: June 13, 2024 / 10:36:22 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 128 %define physical_core_count 128 %define physical_core_max 127 %define logical_core_max 127 ################################################################################ ################################################################################ # The following inc blocks set the speed thread counts and affinity settings. # # intspeed benchmarks: 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s, # 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s, # 657.xz_s # fpspeed benchmarks: 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s, # 627.cam4_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s, # 654.roms_s # # Selected thread counts from '9754' section of CPU info ################################################################################ # default preENV thread settings: default: preENV_OMP_THREAD_LIMIT = 128 preENV_GOMP_CPU_AFFINITY = 0-127 ################################################################################ ################################################################################ # intspeed base thread counts: intspeed=base: threads = 128 ENV_GOMP_CPU_AFFINITY = 0-127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # fpspeed base thread counts: fpspeed=base: threads = 128 ENV_GOMP_CPU_AFFINITY = 0-127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 1 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s,623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: threads = 1 ENV_GOMP_CPU_AFFINITY = 15 bind0 = numactl --physcpubind=15 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 128 603.bwaves_s,619.lbm_s,621.wrf_s,628.pop2_s,649.fotonik3d_s=peak: threads = 128 ENV_GOMP_CPU_AFFINITY = 0-127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 128 607.cactuBSSN_s,627.cam4_s,638.imagick_s,644.nab_s,657.xz_s=peak: threads = 128 ENV_GOMP_CPU_AFFINITY = 0-127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 128 654.roms_s=peak: threads = 128 ENV_GOMP_CPU_AFFINITY = 0 64 1 65 2 66 3 67 4 68 5 69 6 70 7 71 8 72 9 73 10 74 11 75 12 76 13 77 14 78 15 79 16 80 17 81 18 82 19 83 20 84 21 85 22 86 23 87 24 88 25 89 26 90 27 91 28 92 29 93 30 94 31 95 32 96 33 97 34 98 35 99 36 100 37 101 38 102 39 103 40 104 41 105 42 106 43 107 44 108 45 109 46 110 47 111 48 112 49 113 50 114 51 115 52 116 53 117 54 118 55 119 56 120 57 121 58 122 59 123 60 124 61 125 62 126 63 127 bind0 = numactl --physcpubind=0-127 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ ################################################################################ # Switch back to default: default: ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =9066 tester =New H3C Technologies Co., Ltd. test_sponsor =New H3C Technologies Co., Ltd. hw_vendor =New H3C Technologies Co., Ltd. hw_model000 =H3C UniServer R3950 G6 (AMD EPYC 9754) #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 4.0.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =May-2024 sw_avail =Nov-2023 hw_cpu_name =AMD EPYC 9754 hw_cpu_nominal_mhz =2250 hw_cpu_max_mhz =3100 hw_ncores =128 hw_nthreadspercore =1 hw_ncpuorder =1 chip hw_other =CPU Cooling: Air fw_bios =Version 6.30.31 released May-2024 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =1 MB I+D on chip per core hw_tcache000 =256 MB I+D on chip per chip, 16 MB shared / 8 hw_tcache001 = cores hw_ocache =None sw_other =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 9174F CPU + 1.5TiB Memory using RHEL 8.6 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_040 = notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_submit_010 = notes_os_000 ='ulimit -s unlimited' was used to set environment stack size limit notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 = notes_os_030 =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. notes_os_035 =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. notes_os_040 =To free node-local memory and avoid remote memory usage, notes_os_045 ='sysctl -w vm.zone_reclaim_mode=1' run as root. notes_os_050 =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. notes_os_055 =To disable address space layout randomization (ASLR) to reduce run-to-run notes_os_060 =variability, 'sysctl -w kernel.randomize_va_space=0' run as root. notes_os_065 = notes_os_070 =To reduce scheduler overhead, Linux was booted with cmdline option: notes_os_075 =cgroup_disable=memory,cpu,cpuacct,blkio,hugetlb,pids,cpuset,perf_event,freezer,devices,net_cls,net_prio notes_os_thp_000 =To enable Transparent Hugepages (THP) only on request for base runs, notes_os_thp_005 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled' run as root. notes_os_thp_010 =To enable THP for all allocations for peak runs, notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = # notes_jemalloc_000 =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) # notes_jemalloc_005 =jemalloc 5.1.0 is available here: # notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 # notes_jemalloc_015 = # sw_other000 =jemalloc: jemalloc memory allocator library v5.1.0 ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (edit and uncomment as necessary) # notes_plat_000 =BIOS settings: # notes_plat_002 = TDP: 400 # notes_plat_004 = Determinism Slider set to Power # notes_plat_006 = PPT: 400 # notes_plat_010 = NPS: 4 # notes_plat_011 = Workload Profile = CPU Intensive # notes_plat_012 = TSME = Disabled # notes_plat_014 = SEV Control = Disabled # notes_plat_015 = Fan Speed: Maximum ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intspeed: sw_peak_ptrsize =64-bit notes_os_thp_003 = ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fpspeed: sw_peak_ptrsize =Not Applicable notes_os_thp_015 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_020 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_os_thp_025 = ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intspeed,fpspeed: hw_disk =1 x 960GB SSD hw_memory000 =768 GB (12 x 64 GB 2Rx4 PC5-4800B-R) hw_memory002 = hw_nchips =1 prepared_by =prepared by unknown sw_file =xfs sw_os000 =Red Hat Enterprise Linux release 9.3 (Plow) sw_os001 =kernel version # ex: Kernel 4.4.0-87-generic sw_state =Run level 3 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/home/cpu119/config/amd_speed_aocc400_znver4_A1.inc' # Switch back to default block after the include file: default: fail_build = 1 %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{build_lib_dir}/lib:%{ENV_LIBRARY_PATH} % define build_ncpus 16 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/New_H3C-Platform-AMD-Settings-V1.1-Genoa.xml flagsurl001 = http://www.spec.org/cpu2017/flags/aocc400-flags.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak use_submit_for_speed = yes ################################################################################ # Include the flags file: ################################################################################ #include: %{flags_inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_znver4_A1_flags.inc' ############################################################################ ################################################################################ # AMD AOCC 4.0.0 SPEC CPU2017 V1.1.8 Speed Configuration Flags for AMD64 Linux ################################################################################ # Compilers ################################################################################ default: CC = clang -m64 CXX = clang++ -m64 FC = flang -m64 CLD = clang -m64 CXXLD = clang++ -m64 FLD = flang -m64 CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default: # data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ # Default libraries and variables ################################################################################ default: # Libraries: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdalloc \ -lamdlibm \ -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM # Variables: OPT_ROOT = -march=znver4 \ $(VECMATHLIB) \ -ffast-math \ -fopenmp OPT_ROOT_BASE = -O3 \ $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast \ $(OPT_ROOT) \ -flto THP_ALWAYS = echo always > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag THP_NEVER = echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo never > /sys/kernel/mm/transparent_hugepage/defrag THP_MADVISE = echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag DEFAULT_SUBMIT = echo "$command" > run.sh ; $BIND bash run.sh ############################################################################### # AOCC 4.0.0 workarounds that do not count as PORTABILITY ################################################################################ # The workarounds in this section would not qualify under the SPEC CPU # PORTABILITY rule. # - In peak, they can be set as needed for individual benchmarks. # - In base, individual settings are not allowed; set for whole suite. # Use EXTRA_CFLAGS, EXTRA_CXXFLAGS, and EXTRA_FFLAGS for them. # # See: # https://www.spec.org/cpu2017/Docs/runrules.html#portability # https://www.spec.org/cpu2017/Docs/runrules.html#BaseFlags ####################### # Default workarounds # ####################### default: # Allow unused compile/link arguments without triggering warnings during build: EXTRA_CFLAGS = -Wno-unused-command-line-argument EXTRA_CXXFLAGS = -Wno-unused-command-line-argument EXTRA_FFLAGS = -Wno-unused-command-line-argument LDOPTIONS = -Wno-unused-command-line-argument #################### # Base workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - base # ############################## intrate=base: # The following is necessary for 602 gcc: EXTRA_LDFLAGS = -z muldefs ######################### # FP workarounds - base # ######################### # # *** NONE *** # #################### # Peak workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - peak # ############################## 602.gcc_s=peak: #lang='C' EXTRA_LDFLAGS = -z muldefs ##################################### # Floating Point workarounds - peak # ##################################### # # *** NONE *** # ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -fstruct-layout=7 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 \ -fremap-arrays \ -fstrip-mining \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -unroll-threshold=100 \ -finline-aggressive \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching #other libraries # Put OpenMP and math libraries here: # -lm needed at the end for some transcendental functions: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATHLIBOPT because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATHLIBOPT. MATHLIBOPT = ######################### # intspeed tuning flags # ######################### intspeed: FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -optimize-strided-mem-cost EXTRA_FFLAGS = -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 EXTRA_CXXFLAGS = -fvirtual-function-elimination \ -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition LDCXXFLAGS = LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split ############################## # intspeed base tuning flags # ############################## intspeed=base: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lflang \ -lm EXTRA_CLIBS = -lamdalloc EXTRA_CXXLIBS = -lamdalloc-ext EXTRA_FLIBS = -lamdalloc submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################## # intspeed peak tuning flags # ############################## intspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed base tuning flags # ############################# fpspeed=base: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed peak tuning flags # ############################# fpspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=9 \ -mllvm -unroll-threshold=50 \ -fremap-arrays \ -fstrip-mining \ -mllvm -inline-threshold=1000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_PEAK) -finline-aggressive \ -mllvm -unroll-threshold=100 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_PEAK) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw # Benchmark specific peak tuning flags: 603.bwaves_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 607.cactuBSSN_s=peak: #lang='CXX,C,F' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 619.lbm_s=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 620.omnetpp_s=peak: #lang='CXX' EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang -lm 621.wrf_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT_BASE) \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt submit = ${THP_NEVER}; ${DEFAULT_SUBMIT} 623.xalancbmk_s=peak: #lang='CXX' EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ -fvirtual-function-elimination -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 \ -Wl,-mllvm -Wl,-do-block-reorder=aggressive EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang \ -lm 627.cam4_s=peak: #lang='F,C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 628.pop2_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT) \ -Ofast \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 638.imagick_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 644.nab_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-region-vectorize submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 649.fotonik3d_s=peak: #lang='F' ENV_PGHPF_ZMEM = yes submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 654.roms_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_MADVISE}; ${DEFAULT_SUBMIT} 657.xz_s=peak: #lang='C' ENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 8 # ---- End inclusion of '/home/cpu119/config/amd_speed_aocc400_znver4_A1_flags.inc' # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:2eb381fc1a58eb8122e4a1b875c1e38b3489dac84088192aa0ec6d157b084d06) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /home/cpu119/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197 notes_plat_sysinfo_015 = running on localhost.localdomain Thu Jun 13 10:36:27 2024 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = notes_plat_sysinfo_035 = ------------------------------------------------------------ notes_plat_sysinfo_040 = Table of contents notes_plat_sysinfo_045 = ------------------------------------------------------------ notes_plat_sysinfo_050 = 1. uname -a notes_plat_sysinfo_055 = 2. w notes_plat_sysinfo_060 = 3. Username notes_plat_sysinfo_065 = 4. ulimit -a notes_plat_sysinfo_070 = 5. sysinfo process ancestry notes_plat_sysinfo_075 = 6. /proc/cpuinfo notes_plat_sysinfo_080 = 7. lscpu notes_plat_sysinfo_085 = 8. numactl --hardware notes_plat_sysinfo_090 = 9. /proc/meminfo notes_plat_sysinfo_095 = 10. who -r notes_plat_sysinfo_100 = 11. Systemd service manager version: systemd 252 (252-18.el9) notes_plat_sysinfo_105 = 12. Failed units, from systemctl list-units --state=failed notes_plat_sysinfo_110 = 13. Services, from systemctl list-unit-files notes_plat_sysinfo_115 = 14. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_120 = 15. cpupower frequency-info notes_plat_sysinfo_125 = 16. tuned-adm active notes_plat_sysinfo_130 = 17. sysctl notes_plat_sysinfo_135 = 18. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_140 = 19. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_145 = 20. OS release notes_plat_sysinfo_150 = 21. Disk information notes_plat_sysinfo_155 = 22. /sys/devices/virtual/dmi/id notes_plat_sysinfo_160 = 23. dmidecode notes_plat_sysinfo_165 = 24. BIOS notes_plat_sysinfo_170 = ------------------------------------------------------------ notes_plat_sysinfo_175 = notes_plat_sysinfo_180 = ------------------------------------------------------------ notes_plat_sysinfo_185 = 1. uname -a notes_plat_sysinfo_190 = Linux localhost.localdomain 5.14.0-362.8.1.el9_3.x86_64 #1 SMP PREEMPT_DYNAMIC Tue Oct 3 11:12:36 EDT 2023 notes_plat_sysinfo_195 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = ------------------------------------------------------------ notes_plat_sysinfo_210 = 2. w notes_plat_sysinfo_215 = 10:36:27 up 49 min, 2 users, load average: 3.34, 57.68, 82.72 notes_plat_sysinfo_220 = USER TTY LOGIN@ IDLE JCPU PCPU WHAT notes_plat_sysinfo_225 = root tty1 21Aug23 296days 0.00s 0.00s -bash notes_plat_sysinfo_230 = root pts/0 21Aug23 11.00s 1.23s 0.11s /bin/bash ./amd_speed_aocc400_znver4_A1.sh notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = ------------------------------------------------------------ notes_plat_sysinfo_245 = 3. Username notes_plat_sysinfo_250 = From environment variable $USER: root notes_plat_sysinfo_255 = notes_plat_sysinfo_260 = ------------------------------------------------------------ notes_plat_sysinfo_265 = 4. ulimit -a notes_plat_sysinfo_270 = real-time non-blocking time (microseconds, -R) unlimited notes_plat_sysinfo_275 = core file size (blocks, -c) unlimited notes_plat_sysinfo_280 = data seg size (kbytes, -d) unlimited notes_plat_sysinfo_285 = scheduling priority (-e) 0 notes_plat_sysinfo_290 = file size (blocks, -f) unlimited notes_plat_sysinfo_295 = pending signals (-i) 3090765 notes_plat_sysinfo_300 = max locked memory (kbytes, -l) 2097152 notes_plat_sysinfo_305 = max memory size (kbytes, -m) unlimited notes_plat_sysinfo_310 = open files (-n) 1024000 notes_plat_sysinfo_315 = pipe size (512 bytes, -p) 8 notes_plat_sysinfo_320 = POSIX message queues (bytes, -q) 819200 notes_plat_sysinfo_325 = real-time priority (-r) 0 notes_plat_sysinfo_330 = stack size (kbytes, -s) unlimited notes_plat_sysinfo_335 = cpu time (seconds, -t) unlimited notes_plat_sysinfo_340 = max user processes (-u) 3090765 notes_plat_sysinfo_345 = virtual memory (kbytes, -v) unlimited notes_plat_sysinfo_350 = file locks (-x) unlimited notes_plat_sysinfo_355 = notes_plat_sysinfo_360 = ------------------------------------------------------------ notes_plat_sysinfo_365 = 5. sysinfo process ancestry notes_plat_sysinfo_370 = /usr/lib/systemd/systemd --switched-root --system --deserialize 31 notes_plat_sysinfo_375 = sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups notes_plat_sysinfo_380 = sshd: root [priv] notes_plat_sysinfo_385 = sshd: root@pts/0 notes_plat_sysinfo_390 = -bash notes_plat_sysinfo_395 = python3 ./run_amd_speed_aocc400_znver4_A1.py notes_plat_sysinfo_400 = /bin/bash ./amd_speed_aocc400_znver4_A1.sh notes_plat_sysinfo_405 = runcpu --config amd_speed_aocc400_znver4_A1.cfg --tune base --reportable --iterations 3 fpspeed notes_plat_sysinfo_410 = runcpu --configfile amd_speed_aocc400_znver4_A1.cfg --tune base --reportable --iterations 3 --nopower notes_plat_sysinfo_415 = --runmode speed --tune base --size test:train:refspeed fpspeed --nopreenv --note-preenv --logfile notes_plat_sysinfo_420 = $SPEC/tmp/CPU2017.025/templogs/preenv.fpspeed.025.0.log --lognum 025.0 --from_runcpu 2 notes_plat_sysinfo_425 = specperl $SPEC/bin/sysinfo notes_plat_sysinfo_430 = $SPEC = /home/cpu119 notes_plat_sysinfo_435 = notes_plat_sysinfo_440 = ------------------------------------------------------------ notes_plat_sysinfo_445 = 6. /proc/cpuinfo notes_plat_sysinfo_450 = model name : AMD EPYC 9754 128-Core Processor notes_plat_sysinfo_455 = vendor_id : AuthenticAMD notes_plat_sysinfo_460 = cpu family : 25 notes_plat_sysinfo_465 = model : 160 notes_plat_sysinfo_470 = stepping : 2 notes_plat_sysinfo_475 = microcode : 0xaa00215 notes_plat_sysinfo_480 = bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass notes_plat_sysinfo_485 = TLB size : 3584 4K pages notes_plat_sysinfo_490 = cpu cores : 128 notes_plat_sysinfo_495 = siblings : 128 notes_plat_sysinfo_500 = 1 physical ids (chips) notes_plat_sysinfo_505 = 128 processors (hardware threads) notes_plat_sysinfo_510 = physical id 0: core ids notes_plat_sysinfo_515 = 0-7,16-23,32-39,48-55,64-71,80-87,96-103,112-119,128-135,144-151,160-167,176-183,192-199,208-215,224-231, notes_plat_sysinfo_520 = 240-247 notes_plat_sysinfo_525 = physical id 0: apicids notes_plat_sysinfo_530 = 0-7,16-23,32-39,48-55,64-71,80-87,96-103,112-119,128-135,144-151,160-167,176-183,192-199,208-215,224-231, notes_plat_sysinfo_535 = 240-247 notes_plat_sysinfo_540 = Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for notes_plat_sysinfo_545 = virtualized systems. Use the above data carefully. notes_plat_sysinfo_550 = notes_plat_sysinfo_555 = ------------------------------------------------------------ notes_plat_sysinfo_560 = 7. lscpu notes_plat_sysinfo_565 = notes_plat_sysinfo_570 = From lscpu from util-linux 2.37.4: notes_plat_sysinfo_575 = Architecture: x86_64 notes_plat_sysinfo_580 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_585 = Address sizes: 52 bits physical, 57 bits virtual notes_plat_sysinfo_590 = Byte Order: Little Endian notes_plat_sysinfo_595 = CPU(s): 128 notes_plat_sysinfo_600 = On-line CPU(s) list: 0-127 notes_plat_sysinfo_605 = Vendor ID: AuthenticAMD notes_plat_sysinfo_610 = BIOS Vendor ID: Advanced Micro Devices, Inc. notes_plat_sysinfo_615 = Model name: AMD EPYC 9754 128-Core Processor notes_plat_sysinfo_620 = BIOS Model name: AMD EPYC 9754 128-Core Processor notes_plat_sysinfo_625 = CPU family: 25 notes_plat_sysinfo_630 = Model: 160 notes_plat_sysinfo_635 = Thread(s) per core: 1 notes_plat_sysinfo_640 = Core(s) per socket: 128 notes_plat_sysinfo_645 = Socket(s): 1 notes_plat_sysinfo_650 = Stepping: 2 notes_plat_sysinfo_655 = Frequency boost: enabled notes_plat_sysinfo_660 = CPU max MHz: 3100.3411 notes_plat_sysinfo_665 = CPU min MHz: 1500.0000 notes_plat_sysinfo_670 = BogoMIPS: 4493.14 notes_plat_sysinfo_675 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 notes_plat_sysinfo_680 = clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp notes_plat_sysinfo_685 = lm constant_tsc rep_good amd_lbr_v2 nopl nonstop_tsc cpuid extd_apicid notes_plat_sysinfo_690 = aperfmperf rapl pni pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 notes_plat_sysinfo_695 = x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm notes_plat_sysinfo_700 = extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit notes_plat_sysinfo_705 = wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb notes_plat_sysinfo_710 = cat_l3 cdp_l3 invpcid_single hw_pstate ssbd mba perfmon_v2 ibrs ibpb notes_plat_sysinfo_715 = stibp ibrs_enhanced vmmcall fsgsbase bmi1 avx2 smep bmi2 erms invpcid notes_plat_sysinfo_720 = cqm rdt_a avx512f avx512dq rdseed adx smap avx512ifma clflushopt clwb notes_plat_sysinfo_725 = avx512cd sha_ni avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves notes_plat_sysinfo_730 = cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local avx512_bf16 clzero notes_plat_sysinfo_735 = irperf xsaveerptr rdpru wbnoinvd amd_ppin cppc arat npt lbrv svm_lock notes_plat_sysinfo_740 = nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter notes_plat_sysinfo_745 = pfthreshold avic v_vmsave_vmload vgif x2avic v_spec_ctrl vnmi notes_plat_sysinfo_750 = avx512vbmi umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni notes_plat_sysinfo_755 = avx512_bitalg avx512_vpopcntdq la57 rdpid overflow_recov succor smca notes_plat_sysinfo_760 = fsrm flush_l1d notes_plat_sysinfo_765 = Virtualization: AMD-V notes_plat_sysinfo_770 = L1d cache: 4 MiB (128 instances) notes_plat_sysinfo_775 = L1i cache: 4 MiB (128 instances) notes_plat_sysinfo_780 = L2 cache: 128 MiB (128 instances) notes_plat_sysinfo_785 = L3 cache: 256 MiB (16 instances) notes_plat_sysinfo_790 = NUMA node(s): 1 notes_plat_sysinfo_795 = NUMA node0 CPU(s): 0-127 notes_plat_sysinfo_800 = Vulnerability Gather data sampling: Not affected notes_plat_sysinfo_805 = Vulnerability Itlb multihit: Not affected notes_plat_sysinfo_810 = Vulnerability L1tf: Not affected notes_plat_sysinfo_815 = Vulnerability Mds: Not affected notes_plat_sysinfo_820 = Vulnerability Meltdown: Not affected notes_plat_sysinfo_825 = Vulnerability Mmio stale data: Not affected notes_plat_sysinfo_830 = Vulnerability Retbleed: Not affected notes_plat_sysinfo_835 = Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl notes_plat_sysinfo_840 = Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization notes_plat_sysinfo_845 = Vulnerability Spectre v2: Mitigation; Enhanced / Automatic IBRS, IBPB conditional, STIBP notes_plat_sysinfo_850 = disabled, RSB filling, PBRSB-eIBRS Not affected notes_plat_sysinfo_855 = Vulnerability Srbds: Not affected notes_plat_sysinfo_860 = Vulnerability Tsx async abort: Not affected notes_plat_sysinfo_865 = notes_plat_sysinfo_870 = From lscpu --cache: notes_plat_sysinfo_875 = NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE notes_plat_sysinfo_880 = L1d 32K 4M 8 Data 1 64 1 64 notes_plat_sysinfo_885 = L1i 32K 4M 8 Instruction 1 64 1 64 notes_plat_sysinfo_890 = L2 1M 128M 8 Unified 2 2048 1 64 notes_plat_sysinfo_895 = L3 16M 256M 16 Unified 3 16384 1 64 notes_plat_sysinfo_900 = notes_plat_sysinfo_905 = ------------------------------------------------------------ notes_plat_sysinfo_910 = 8. numactl --hardware notes_plat_sysinfo_915 = NOTE: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_920 = available: 1 nodes (0) notes_plat_sysinfo_925 = node 0 cpus: 0-127 notes_plat_sysinfo_930 = node 0 size: 772752 MB notes_plat_sysinfo_935 = node 0 free: 767787 MB notes_plat_sysinfo_940 = node distances: notes_plat_sysinfo_945 = node 0 notes_plat_sysinfo_950 = 0: 10 notes_plat_sysinfo_955 = notes_plat_sysinfo_960 = ------------------------------------------------------------ notes_plat_sysinfo_965 = 9. /proc/meminfo notes_plat_sysinfo_970 = MemTotal: 791298604 kB notes_plat_sysinfo_975 = notes_plat_sysinfo_980 = ------------------------------------------------------------ notes_plat_sysinfo_985 = 10. who -r notes_plat_sysinfo_990 = run-level 3 Aug 21 20:00 notes_plat_sysinfo_995 = notes_plat_sysinfo_1000= ------------------------------------------------------------ notes_plat_sysinfo_1005= 11. Systemd service manager version: systemd 252 (252-18.el9) notes_plat_sysinfo_1010= Default Target Status notes_plat_sysinfo_1015= multi-user degraded notes_plat_sysinfo_1020= notes_plat_sysinfo_1025= ------------------------------------------------------------ notes_plat_sysinfo_1030= 12. Failed units, from systemctl list-units --state=failed notes_plat_sysinfo_1035= UNIT LOAD ACTIVE SUB DESCRIPTION notes_plat_sysinfo_1040= * mdmonitor.service loaded failed failed Software RAID monitoring and management notes_plat_sysinfo_1045= notes_plat_sysinfo_1050= ------------------------------------------------------------ notes_plat_sysinfo_1055= 13. Services, from systemctl list-unit-files notes_plat_sysinfo_1060= STATE UNIT FILES notes_plat_sysinfo_1065= enabled ModemManager NetworkManager NetworkManager-dispatcher NetworkManager-wait-online notes_plat_sysinfo_1070= accounts-daemon atd auditd avahi-daemon bluetooth chronyd crond cups dbus-broker gdm notes_plat_sysinfo_1075= getty@ insights-client-boot irqbalance iscsi iscsi-onboot kdump ksm ksmtuned notes_plat_sysinfo_1080= libstoragemgmt lm_sensors low-memory-monitor lvm2-monitor mcelog mdmonitor microcode notes_plat_sysinfo_1085= multipathd nis-domainname nvmefc-boot-connections ostree-remount power-profiles-daemon notes_plat_sysinfo_1090= qemu-guest-agent rhsmcertd rsyslog rtkit-daemon selinux-autorelabel-mark smartd sshd sssd notes_plat_sysinfo_1095= switcheroo-control systemd-boot-update systemd-network-generator tuned udisks2 upower notes_plat_sysinfo_1100= vgauthd vmtoolsd notes_plat_sysinfo_1105= enabled-runtime systemd-remount-fs notes_plat_sysinfo_1110= disabled arp-ethers blk-availability brltty canberra-system-bootup canberra-system-shutdown notes_plat_sysinfo_1115= canberra-system-shutdown-reboot chrony-wait cni-dhcp console-getty cpupower cups-browsed notes_plat_sysinfo_1120= dbus-daemon debug-shell dnf-system-upgrade dnsmasq fancontrol firewalld hwloc-dump-hwdata notes_plat_sysinfo_1125= iprdump iprinit iprupdate iscsid iscsiuio kpatch kvm_stat ledmon notes_plat_sysinfo_1130= man-db-restart-cache-update netavark-dhcp-proxy nftables nvmf-autoconnect notes_plat_sysinfo_1135= ostree-readonly-sysroot-migration podman podman-auto-update podman-clean-transient notes_plat_sysinfo_1140= podman-kube@ podman-restart powertop psacct ras-mc-ctl rasdaemon rdisc rhcd rhsm notes_plat_sysinfo_1145= rhsm-facts rpmdb-rebuild selinux-check-proper-disable serial-getty@ speech-dispatcherd notes_plat_sysinfo_1150= sshd-keygen@ systemd-boot-check-no-failures systemd-pstore systemd-sysext wpa_supplicant notes_plat_sysinfo_1155= indirect spice-vdagentd sssd-autofs sssd-kcm sssd-nss sssd-pac sssd-pam sssd-ssh sssd-sudo notes_plat_sysinfo_1160= systemd-sysupdate systemd-sysupdate-reboot notes_plat_sysinfo_1165= notes_plat_sysinfo_1170= ------------------------------------------------------------ notes_plat_sysinfo_1175= 14. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_1180= BOOT_IMAGE=(hd0,gpt2)/vmlinuz-5.14.0-362.8.1.el9_3.x86_64 notes_plat_sysinfo_1185= root=/dev/mapper/rhel-root notes_plat_sysinfo_1190= ro notes_plat_sysinfo_1195= crashkernel=1G-4G:192M,4G-64G:256M,64G-:512M notes_plat_sysinfo_1200= resume=/dev/mapper/rhel-swap notes_plat_sysinfo_1205= rd.lvm.lv=rhel/root notes_plat_sysinfo_1210= rd.lvm.lv=rhel/swap notes_plat_sysinfo_1215= default_hugepagesz=1G notes_plat_sysinfo_1220= cgroup_disable=memory,cpu,cpuacct,blkio,hugetlb,pids,cpuset,perf_event,freezer,devices,net_cls,net_prio notes_plat_sysinfo_1225= notes_plat_sysinfo_1230= ------------------------------------------------------------ notes_plat_sysinfo_1235= 15. cpupower frequency-info notes_plat_sysinfo_1240= analyzing CPU 0: notes_plat_sysinfo_1245= current policy: frequency should be within 1.50 GHz and 2.25 GHz. notes_plat_sysinfo_1250= The governor "performance" may decide which speed to use notes_plat_sysinfo_1255= within this range. notes_plat_sysinfo_1260= boost state support: notes_plat_sysinfo_1265= Supported: yes notes_plat_sysinfo_1270= Active: yes notes_plat_sysinfo_1275= Boost States: 0 notes_plat_sysinfo_1280= Total States: 3 notes_plat_sysinfo_1285= Pstate-P0: 2250MHz notes_plat_sysinfo_1290= notes_plat_sysinfo_1295= ------------------------------------------------------------ notes_plat_sysinfo_1300= 16. tuned-adm active notes_plat_sysinfo_1305= Current active profile: throughput-performance notes_plat_sysinfo_1310= notes_plat_sysinfo_1315= ------------------------------------------------------------ notes_plat_sysinfo_1320= 17. sysctl notes_plat_sysinfo_1325= kernel.numa_balancing 0 notes_plat_sysinfo_1330= kernel.randomize_va_space 0 notes_plat_sysinfo_1335= vm.compaction_proactiveness 20 notes_plat_sysinfo_1340= vm.dirty_background_bytes 0 notes_plat_sysinfo_1345= vm.dirty_background_ratio 10 notes_plat_sysinfo_1350= vm.dirty_bytes 0 notes_plat_sysinfo_1355= vm.dirty_expire_centisecs 3000 notes_plat_sysinfo_1360= vm.dirty_ratio 8 notes_plat_sysinfo_1365= vm.dirty_writeback_centisecs 500 notes_plat_sysinfo_1370= vm.dirtytime_expire_seconds 43200 notes_plat_sysinfo_1375= vm.extfrag_threshold 500 notes_plat_sysinfo_1380= vm.min_unmapped_ratio 1 notes_plat_sysinfo_1385= vm.nr_hugepages 0 notes_plat_sysinfo_1390= vm.nr_hugepages_mempolicy 0 notes_plat_sysinfo_1395= vm.nr_overcommit_hugepages 0 notes_plat_sysinfo_1400= vm.swappiness 1 notes_plat_sysinfo_1405= vm.watermark_boost_factor 15000 notes_plat_sysinfo_1410= vm.watermark_scale_factor 10 notes_plat_sysinfo_1415= vm.zone_reclaim_mode 1 notes_plat_sysinfo_1420= notes_plat_sysinfo_1425= ------------------------------------------------------------ notes_plat_sysinfo_1430= 18. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_1435= defrag [always] defer defer+madvise madvise never notes_plat_sysinfo_1440= enabled [always] madvise never notes_plat_sysinfo_1445= hpage_pmd_size 2097152 notes_plat_sysinfo_1450= shmem_enabled always within_size advise [never] deny force notes_plat_sysinfo_1455= notes_plat_sysinfo_1460= ------------------------------------------------------------ notes_plat_sysinfo_1465= 19. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_1470= alloc_sleep_millisecs 60000 notes_plat_sysinfo_1475= defrag 1 notes_plat_sysinfo_1480= max_ptes_none 511 notes_plat_sysinfo_1485= max_ptes_shared 256 notes_plat_sysinfo_1490= max_ptes_swap 64 notes_plat_sysinfo_1495= pages_to_scan 4096 notes_plat_sysinfo_1500= scan_sleep_millisecs 10000 notes_plat_sysinfo_1505= notes_plat_sysinfo_1510= ------------------------------------------------------------ notes_plat_sysinfo_1515= 20. OS release notes_plat_sysinfo_1520= From /etc/*-release /etc/*-version notes_plat_sysinfo_1525= os-release Red Hat Enterprise Linux 9.3 (Plow) notes_plat_sysinfo_1530= redhat-release Red Hat Enterprise Linux release 9.3 (Plow) notes_plat_sysinfo_1535= system-release Red Hat Enterprise Linux release 9.3 (Plow) notes_plat_sysinfo_1540= notes_plat_sysinfo_1545= ------------------------------------------------------------ notes_plat_sysinfo_1550= 21. Disk information notes_plat_sysinfo_1555= SPEC is set to: /home/cpu119 notes_plat_sysinfo_1560= Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_1565= /dev/mapper/rhel-home xfs 819G 11G 808G 2% /home notes_plat_sysinfo_1570= notes_plat_sysinfo_1575= ------------------------------------------------------------ notes_plat_sysinfo_1580= 22. /sys/devices/virtual/dmi/id notes_plat_sysinfo_1585= Vendor: N/A notes_plat_sysinfo_1590= Product: N/A notes_plat_sysinfo_1595= Product Family: Rack notes_plat_sysinfo_1600= Serial: N/A notes_plat_sysinfo_1605= notes_plat_sysinfo_1610= ------------------------------------------------------------ notes_plat_sysinfo_1615= 23. dmidecode notes_plat_sysinfo_1620= Additional information from dmidecode 3.5 follows. WARNING: Use caution when you interpret this section. notes_plat_sysinfo_1625= The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_1630= determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the notes_plat_sysinfo_1635= "DMTF SMBIOS" standard. notes_plat_sysinfo_1640= Memory: notes_plat_sysinfo_1645= 12x Micron Technology MTC40F2046S1RC48BA1 64 GB 2 rank 4800 notes_plat_sysinfo_1650= notes_plat_sysinfo_1655= notes_plat_sysinfo_1660= ------------------------------------------------------------ notes_plat_sysinfo_1665= 24. BIOS notes_plat_sysinfo_1670= (This section combines info from /sys/devices and dmidecode.) notes_plat_sysinfo_1675= BIOS Vendor: American Megatrends International, LLC. notes_plat_sysinfo_1680= BIOS Version: 6.30.31 notes_plat_sysinfo_1685= BIOS Date: 05/30/2024 notes_plat_sysinfo_1690= BIOS Revision: 5.27 hw_cpu_name = AMD EPYC 9754 hw_disk = 819 GB add more disk info here hw_memory001 = 754.641 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 1 hw_ncores = 128 hw_nthreadspercore = 1 prepared_by = root (is never output, only tags rawfile) sw_file = xfs sw_os001 = Red Hat Enterprise Linux 9.3 (Plow) sw_os002 = 5.14.0-362.8.1.el9_3.x86_64 sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: power_management000 = BIOS and OS set to prefer performance at the cost power_management001 = of additional power usage notes_plat_000 =BIOS settings: notes_plat_005 =cTDP Control: Manual notes_plat_010 =cTDP: 400 notes_plat_015 =PPT Control: Manual notes_plat_020 =PPT: 400 notes_plat_025 =Determinism Slider set to Power notes_plat_030 =NUMA nodes per socket: NPS1 notes_plat_035 =IOMMU: Auto notes_plat_040 =SVM Mode: Disabled notes_plat_045 =SMT: Disabled