# Invocation command line: # /home/new_cpu2017/bin/harness/runcpu --configfile amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 --nopower --runmode speed --tune base:peak --size test:train:refspeed fpspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 400 SPEC CPU 2017 V1.1.9 Speed Configuration File for 64-bit Linux # # File name : amd_speed_aocc400_znver4_A1.cfg # Creation Date : April 16, 2023 # CPU 2017 Version : 1.1.9 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC 4.0.0 # Operating system version : RHEL 8.6 # Supported OS's : Ubuntu 22.04, RHEL 8.6/9, SLE 15 SP4 # Hardware : AMD znver4 (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 64-bit # Auto Parallelization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_speed_aocc400_znver4_A1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU 2017 under optimized conditions on AMD znver4-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD znver4 microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_speed_aocc400_znver4_A1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on one socket AMD # znver4-based servers with 96 cores, SMT enabled and 768 (64x12) GB of DDR5 # memory distributed evenly among all 12 channels using 64 GiB DIMMs. # # To run the binary package on other znver4 configurations, please review # "Readme.amd_speed_aocc400_znver4_A1.txt". In general, znver4 CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_speed_aocc400_znver4_A1.cfg" or any # other file besides "ini_amd_speed_aocc400_znver4_A1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of speed copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 22.04, RHEL 8.6/9, and SLE 15 SP4. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Modifiable macros: ################################################################################ # "allow_build"" switch: # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc400 %define binary_package_name amd_speed_%{compiler_name}_znver4_A %define binary_package_ext %{binary_package_name} %define binary_package_revision 1 %define build_path ${SPEC} %define flags_file_name %{compiler_name}-flags.xml # Do NOT change build_lib_dir after the build or it will trigger a # rebuild of the xalanc. It should also remain literal: %define build_lib_dir amd_speed_aocc400_znver4_A_lib # To enable the platform file, be sure to uncomment the flagsurl02 header line # below in the Header settings. %define platform_file_name INVALID_platform_%{binary_package_name}.xml ################################################################################ # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name %{binary_package_full_name}.inc %define flags_inc_file_name %{binary_package_full_name}_flags.inc # Binary label extension: # Only modify the binary label extension if you plan to rebuild the binaries. # If you plan to recompile these CPU 2017 binaries, please choose a new extension # name below to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true above. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Note that AMD calls an external script to set up the compiler and library # paths before initiating the build. %define ext %{binary_package_ext} ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # retain:true is necessary to avoid gcc out-of-memory exceptions on certain SUTs: # oversize_threshold is required to support jemalloc 5.2.x+ preENV_MALLOC_CONF = oversize_threshold:0,retain:true preENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 0 # OpenMP environment variables: preENV_OMP_SCHEDULE = static preENV_OMP_DYNAMIC = false preENV_OMP_STACKSIZE = 128M # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/lib:%{ENV_LD_LIBRARY_PATH} %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_znver4_A1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_speed_aocc400_znver4_A1.inc # File generation code date: October 11, 2022 # File generation date/time: June 30, 2023 / 16:29:06 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 224 %define physical_core_count 224 %define physical_core_max 223 %define logical_core_max 223 ################################################################################ ################################################################################ # The following inc blocks set the speed thread counts and affinity settings. # # intspeed benchmarks: 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s, # 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s, # 657.xz_s # fpspeed benchmarks: 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s, # 627.cam4_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s, # 654.roms_s # # Selected thread counts from '9734' section of CPU info ################################################################################ # default preENV thread settings: default: preENV_OMP_THREAD_LIMIT = 224 preENV_GOMP_CPU_AFFINITY = 0-223 ################################################################################ ################################################################################ # intspeed base thread counts: intspeed=base: threads = 224 ENV_GOMP_CPU_AFFINITY = 0-223 bind0 = numactl --physcpubind=0-223 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # fpspeed base thread counts: fpspeed=base: threads = 224 ENV_GOMP_CPU_AFFINITY = 0-223 bind0 = numactl --physcpubind=0-223 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 1 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s,623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: threads = 1 ENV_GOMP_CPU_AFFINITY = 15 bind0 = numactl --physcpubind=15 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 224 603.bwaves_s,619.lbm_s,621.wrf_s,628.pop2_s,649.fotonik3d_s=peak: threads = 224 ENV_GOMP_CPU_AFFINITY = 0-223 bind0 = numactl --physcpubind=0-223 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 224 607.cactuBSSN_s,627.cam4_s,638.imagick_s,644.nab_s,657.xz_s=peak: threads = 224 ENV_GOMP_CPU_AFFINITY = 0-223 bind0 = numactl --physcpubind=0-223 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 224 654.roms_s=peak: threads = 224 ENV_GOMP_CPU_AFFINITY = 0 112 1 113 2 114 3 115 4 116 5 117 6 118 7 119 8 120 9 121 10 122 11 123 12 124 13 125 14 126 15 127 16 128 17 129 18 130 19 131 20 132 21 133 22 134 23 135 24 136 25 137 26 138 27 139 28 140 29 141 30 142 31 143 32 144 33 145 34 146 35 147 36 148 37 149 38 150 39 151 40 152 41 153 42 154 43 155 44 156 45 157 46 158 47 159 48 160 49 161 50 162 51 163 52 164 53 165 54 166 55 167 56 168 57 169 58 170 59 171 60 172 61 173 62 174 63 175 64 176 65 177 66 178 67 179 68 180 69 181 70 182 71 183 72 184 73 185 74 186 75 187 76 188 77 189 78 190 79 191 80 192 81 193 82 194 83 195 84 196 85 197 86 198 87 199 88 200 89 201 90 202 91 203 92 204 93 205 94 206 95 207 96 208 97 209 98 210 99 211 100 212 101 213 102 214 103 215 104 216 105 217 106 218 107 219 108 220 109 221 110 222 111 223 bind0 = numactl --physcpubind=0-223 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ ################################################################################ # Switch back to default: default: ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =3 tester =HPE test_sponsor =HPE hw_vendor =Hewlett Packard Enterprise hw_model000 =ProLiant DL365 Gen11 hw_model001 =(2.20 GHz, AMD EPYC 9734) #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 4.0.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Sep-2023 sw_avail =Apr-2023 hw_cpu_name =AMD EPYC 9734 hw_cpu_nominal_mhz =2200 hw_cpu_max_mhz =3000 hw_ncores =224 hw_nthreadspercore =1 hw_ncpuorder =1,2 chips hw_other =None # Other perf-relevant hw, or "None" fw_bios000 =HPE BIOS Version v1.30 03/06/2023 released fw_bios001 = Mar-2023 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =1 MB I+D on chip per core hw_tcache000 =256 MB I+D on chip per chip, hw_tcache001 = 16 MB shared / 7 cores hw_ocache =None sw_other =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 9174F CPU + 1.5TiB Memory using RHEL 8.6 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_040 = notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_submit_010 = notes_os_000 ='ulimit -s unlimited' was used to set environment stack size limit notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 = notes_os_030 =To limit dirty cache to 8% of memory, 'sysctl -w vm.dirty_ratio=8' run as root. notes_os_035 =To limit swap usage to minimum necessary, 'sysctl -w vm.swappiness=1' run as root. notes_os_040 =To free node-local memory and avoid remote memory usage, notes_os_045 ='sysctl -w vm.zone_reclaim_mode=1' run as root. notes_os_050 =To clear filesystem caches, 'sync; sysctl -w vm.drop_caches=3' run as root. notes_os_055 =To disable address space layout randomization (ASLR) to reduce run-to-run notes_os_060 =variability, 'sysctl -w kernel.randomize_va_space=0' run as root. notes_os_065 = notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_005 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_010 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = # notes_jemalloc_000 =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) # notes_jemalloc_005 =jemalloc 5.1.0 is available here: # notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 # notes_jemalloc_015 = # sw_other000 =jemalloc: jemalloc memory allocator library v5.1.0 ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (edit and uncomment as necessary) # notes_plat_000 =BIOS settings: # notes_plat_002 = TDP: 400 # notes_plat_004 = Determinism Slider set to Power # notes_plat_006 = PPT: 400 # notes_plat_010 = NPS: 4 # notes_plat_011 = Workload Profile = CPU Intensive # notes_plat_012 = TSME = Disabled # notes_plat_014 = SEV Control = Disabled # notes_plat_015 = Fan Speed: Maximum ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intspeed: sw_peak_ptrsize =64-bit notes_os_thp_003 = ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fpspeed: sw_peak_ptrsize =64-bit notes_os_thp_015 =To always enable THP for peak runs of: notes_os_thp_020 =603.bwaves_s, 607.cactuBSSN_s, 619.lbm_s, 627.cam4_s, 628.pop2_s, 638.imagick_s, 644.nab_s, 649.fotonik3d_s: notes_os_thp_025 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_030 =run as root. notes_os_thp_035 =To disable THP for peak runs of 621.wrf_s: notes_os_thp_040 ='echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_045 =run as root. notes_os_thp_050 =To enable THP only on request for peak runs of 654.roms_s: notes_os_thp_055 ='echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag' notes_os_thp_060 =run as root. ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intspeed,fpspeed: hw_disk =1 x 960 GB SATA SSD hw_memory =768 GB (12 x 64 GB 2Rx4 PC5-4800B-R) hw_nchips =2 prepared_by =HPE Performance Engineering sw_file =xfs sw_os000 =Red Hat Enterprise Linux 9.0 (Plow) sw_os001 =Kernel 5.14.0-70.13.1.el9_0.x86_64 sw_state =Run level 3 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/home/new_cpu2017/config/amd_speed_aocc400_znver4_A1.inc' # Switch back to default block after the include file: default: fail_build = 1 %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{build_lib_dir}/lib:%{ENV_LIBRARY_PATH} % define build_ncpus 16 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/HPE-Platform-Flags-AMD-Bergamo-rev1.0.xml flagsurl001 = http://www.spec.org/cpu2017/flags/aocc400-flags.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak use_submit_for_speed = yes ################################################################################ # Include the flags file: ################################################################################ #include: %{flags_inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc400_znver4_A1_flags.inc' ############################################################################ ################################################################################ # AMD AOCC 4.0.0 SPEC CPU2017 V1.1.8 Speed Configuration Flags for AMD64 Linux ################################################################################ # Compilers ################################################################################ default: CC = clang -m64 CXX = clang++ -m64 FC = flang -m64 CLD = clang -m64 CXXLD = clang++ -m64 FLD = flang -m64 CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default: # data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ # Default libraries and variables ################################################################################ default: # Libraries: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdalloc \ -lamdlibm \ -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM # Variables: OPT_ROOT = -march=znver4 \ $(VECMATHLIB) \ -ffast-math \ -fopenmp OPT_ROOT_BASE = -O3 \ $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast \ $(OPT_ROOT) \ -flto THP_ALWAYS = echo always > /sys/kernel/mm/transparent_hugepage/enabled; echo always > /sys/kernel/mm/transparent_hugepage/defrag THP_NEVER = echo never > /sys/kernel/mm/transparent_hugepage/enabled; echo never > /sys/kernel/mm/transparent_hugepage/defrag THP_MADVISE = echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; echo madvise > /sys/kernel/mm/transparent_hugepage/defrag DEFAULT_SUBMIT = echo "$command" > run.sh ; $BIND bash run.sh ############################################################################### # AOCC 4.0.0 workarounds that do not count as PORTABILITY ################################################################################ # The workarounds in this section would not qualify under the SPEC CPU # PORTABILITY rule. # - In peak, they can be set as needed for individual benchmarks. # - In base, individual settings are not allowed; set for whole suite. # Use EXTRA_CFLAGS, EXTRA_CXXFLAGS, and EXTRA_FFLAGS for them. # # See: # https://www.spec.org/cpu2017/Docs/runrules.html#portability # https://www.spec.org/cpu2017/Docs/runrules.html#BaseFlags ####################### # Default workarounds # ####################### default: # Allow unused compile/link arguments without triggering warnings during build: EXTRA_CFLAGS = -Wno-unused-command-line-argument EXTRA_CXXFLAGS = -Wno-unused-command-line-argument EXTRA_FFLAGS = -Wno-unused-command-line-argument LDOPTIONS = -Wno-unused-command-line-argument #################### # Base workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - base # ############################## intrate=base: # The following is necessary for 602 gcc: EXTRA_LDFLAGS = -z muldefs ######################### # FP workarounds - base # ######################### # # *** NONE *** # #################### # Peak workarounds # #################### # # *** NONE *** # ############################## # Integer workarounds - peak # ############################## 602.gcc_s=peak: #lang='C' EXTRA_LDFLAGS = -z muldefs ##################################### # Floating Point workarounds - peak # ##################################### # # *** NONE *** # ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -fstruct-layout=7 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 \ -fremap-arrays \ -fstrip-mining \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -unroll-threshold=100 \ -finline-aggressive \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching #other libraries # Put OpenMP and math libraries here: # -lm needed at the end for some transcendental functions: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATHLIBOPT because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATHLIBOPT. MATHLIBOPT = ######################### # intspeed tuning flags # ######################### intspeed: FOPTIMIZE = $(OPT_ROOT_BASE) \ -flto \ -mllvm -optimize-strided-mem-cost EXTRA_FFLAGS = -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 EXTRA_CXXFLAGS = -fvirtual-function-elimination \ -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCFLAGS = -Wl,-allow-multiple-definition LDCXXFLAGS = LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split ############################## # intspeed base tuning flags # ############################## intspeed=base: EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lflang \ -lm EXTRA_CLIBS = -lamdalloc EXTRA_CXXLIBS = -lamdalloc-ext EXTRA_FLIBS = -lamdalloc submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################## # intspeed peak tuning flags # ############################## intspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed base tuning flags # ############################# fpspeed=base: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ############################# # fpspeed peak tuning flags # ############################# fpspeed=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=9 \ -mllvm -unroll-threshold=50 \ -fremap-arrays \ -fstrip-mining \ -mllvm -inline-threshold=1000 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP -Wno-return-type \ -zopt CXXOPTIMIZE = $(OPT_ROOT_PEAK) -finline-aggressive \ -mllvm -unroll-threshold=100 \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt FOPTIMIZE = $(OPT_ROOT_PEAK) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc \ -lflang \ -lm feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw # Benchmark specific peak tuning flags: 603.bwaves_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 607.cactuBSSN_s=peak: #lang='CXX,C,F' submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 619.lbm_s=peak: submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 620.omnetpp_s=peak: #lang='CXX' EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang -lm 621.wrf_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT_BASE) \ -Mrecursive \ -funroll-loops \ -mllvm -lsr-in-nested-loop \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -zopt submit = ${THP_NEVER}; ${DEFAULT_SUBMIT} 623.xalancbmk_s=peak: #lang='CXX' EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ -fvirtual-function-elimination -fvisibility=hidden LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 \ -Wl,-mllvm -Wl,-do-block-reorder=aggressive EXTRA_LIBS = -fopenmp=libomp \ -lomp \ -lamdlibm \ -lamdalloc-ext \ -lflang \ -lm 627.cam4_s=peak: #lang='F,C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 628.pop2_s=peak: #lang='F,C' FOPTIMIZE = $(OPT_ROOT) \ -Ofast \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 638.imagick_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 644.nab_s=peak: #lang='C' LDFLAGS = -Wl,-mllvm -Wl,-region-vectorize submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 649.fotonik3d_s=peak: #lang='F' ENV_PGHPF_ZMEM = yes submit = ${THP_ALWAYS}; ${DEFAULT_SUBMIT} 654.roms_s=peak: #lang='F' FOPTIMIZE = -Ofast \ $(OPT_ROOT) \ -Mrecursive \ -mllvm -reduce-array-computations=3 \ -DSPEC_OPENMP \ -fvector-transform \ -fscalar-transform submit = ${THP_MADVISE}; ${DEFAULT_SUBMIT} 657.xz_s=peak: #lang='C' ENV_LIBOMP_NUM_HIDDEN_HELPER_THREADS = 8 # ---- End inclusion of '/home/new_cpu2017/config/amd_speed_aocc400_znver4_A1_flags.inc' # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:2eb381fc1a58eb8122e4a1b875c1e38b3489dac84088192aa0ec6d157b084d06) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /home/new_cpu2017/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197 notes_plat_sysinfo_015 = running on localhost.localdomain Fri Jun 30 16:29:18 2023 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = notes_plat_sysinfo_035 = ------------------------------------------------------------ notes_plat_sysinfo_040 = Table of contents notes_plat_sysinfo_045 = ------------------------------------------------------------ notes_plat_sysinfo_050 = 1. uname -a notes_plat_sysinfo_055 = 2. w notes_plat_sysinfo_060 = 3. Username notes_plat_sysinfo_065 = 4. ulimit -a notes_plat_sysinfo_070 = 5. sysinfo process ancestry notes_plat_sysinfo_075 = 6. /proc/cpuinfo notes_plat_sysinfo_080 = 7. lscpu notes_plat_sysinfo_085 = 8. numactl --hardware notes_plat_sysinfo_090 = 9. /proc/meminfo notes_plat_sysinfo_095 = 10. who -r notes_plat_sysinfo_100 = 11. Systemd service manager version: systemd 250 (250-6.el9_0) notes_plat_sysinfo_105 = 12. Services, from systemctl list-unit-files notes_plat_sysinfo_110 = 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_115 = 14. cpupower frequency-info notes_plat_sysinfo_120 = 15. tuned-adm active notes_plat_sysinfo_125 = 16. sysctl notes_plat_sysinfo_130 = 17. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_135 = 18. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_140 = 19. OS release notes_plat_sysinfo_145 = 20. Disk information notes_plat_sysinfo_150 = 21. /sys/devices/virtual/dmi/id notes_plat_sysinfo_155 = 22. dmidecode notes_plat_sysinfo_160 = 23. BIOS notes_plat_sysinfo_165 = ------------------------------------------------------------ notes_plat_sysinfo_170 = notes_plat_sysinfo_175 = ------------------------------------------------------------ notes_plat_sysinfo_180 = 1. uname -a notes_plat_sysinfo_185 = Linux localhost.localdomain 5.14.0-70.13.1.el9_0.x86_64 #1 SMP PREEMPT Thu Apr 14 12:42:38 EDT 2022 x86_64 notes_plat_sysinfo_190 = x86_64 x86_64 GNU/Linux notes_plat_sysinfo_195 = notes_plat_sysinfo_200 = ------------------------------------------------------------ notes_plat_sysinfo_205 = 2. w notes_plat_sysinfo_210 = 16:29:18 up 1 min, 0 users, load average: 16.57, 10.34, 4.04 notes_plat_sysinfo_215 = USER TTY LOGIN@ IDLE JCPU PCPU WHAT notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = ------------------------------------------------------------ notes_plat_sysinfo_230 = 3. Username notes_plat_sysinfo_235 = From environment variable $USER: root notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = ------------------------------------------------------------ notes_plat_sysinfo_250 = 4. ulimit -a notes_plat_sysinfo_255 = real-time non-blocking time (microseconds, -R) unlimited notes_plat_sysinfo_260 = core file size (blocks, -c) 0 notes_plat_sysinfo_265 = data seg size (kbytes, -d) unlimited notes_plat_sysinfo_270 = scheduling priority (-e) 0 notes_plat_sysinfo_275 = file size (blocks, -f) unlimited notes_plat_sysinfo_280 = pending signals (-i) 6191103 notes_plat_sysinfo_285 = max locked memory (kbytes, -l) 2097152 notes_plat_sysinfo_290 = max memory size (kbytes, -m) unlimited notes_plat_sysinfo_295 = open files (-n) 1024 notes_plat_sysinfo_300 = pipe size (512 bytes, -p) 8 notes_plat_sysinfo_305 = POSIX message queues (bytes, -q) 819200 notes_plat_sysinfo_310 = real-time priority (-r) 0 notes_plat_sysinfo_315 = stack size (kbytes, -s) unlimited notes_plat_sysinfo_320 = cpu time (seconds, -t) unlimited notes_plat_sysinfo_325 = max user processes (-u) 6191103 notes_plat_sysinfo_330 = virtual memory (kbytes, -v) unlimited notes_plat_sysinfo_335 = file locks (-x) unlimited notes_plat_sysinfo_340 = notes_plat_sysinfo_345 = ------------------------------------------------------------ notes_plat_sysinfo_350 = 5. sysinfo process ancestry notes_plat_sysinfo_355 = /usr/lib/systemd/systemd --switched-root --system --deserialize 30 notes_plat_sysinfo_360 = sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups notes_plat_sysinfo_365 = sshd: root [priv] notes_plat_sysinfo_370 = sshd: root@notty notes_plat_sysinfo_375 = bash -c cd $SPEC/ && $SPEC/fpspeed.sh notes_plat_sysinfo_380 = python3 ./run_fpspeed.py notes_plat_sysinfo_385 = /bin/bash ./amd_speed_aocc400_znver4_A1.sh notes_plat_sysinfo_390 = runcpu --config amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 fpspeed notes_plat_sysinfo_395 = runcpu --configfile amd_speed_aocc400_znver4_A1.cfg --tune all --reportable --iterations 3 --nopower notes_plat_sysinfo_400 = --runmode speed --tune base:peak --size test:train:refspeed fpspeed --nopreenv --note-preenv --logfile notes_plat_sysinfo_405 = $SPEC/tmp/CPU2017.001/templogs/preenv.fpspeed.001.0.log --lognum 001.0 --from_runcpu 2 notes_plat_sysinfo_410 = specperl $SPEC/bin/sysinfo notes_plat_sysinfo_415 = $SPEC = /home/new_cpu2017 notes_plat_sysinfo_420 = notes_plat_sysinfo_425 = ------------------------------------------------------------ notes_plat_sysinfo_430 = 6. /proc/cpuinfo notes_plat_sysinfo_435 = model name : AMD EPYC 9734 112-Core Processor notes_plat_sysinfo_440 = vendor_id : AuthenticAMD notes_plat_sysinfo_445 = cpu family : 25 notes_plat_sysinfo_450 = model : 160 notes_plat_sysinfo_455 = stepping : 2 notes_plat_sysinfo_460 = bugs : sysret_ss_attrs spectre_v1 spectre_v2 spec_store_bypass notes_plat_sysinfo_465 = TLB size : 3584 4K pages notes_plat_sysinfo_470 = cpu cores : 112 notes_plat_sysinfo_475 = siblings : 112 notes_plat_sysinfo_480 = 2 physical ids (chips) notes_plat_sysinfo_485 = 224 processors (hardware threads) notes_plat_sysinfo_490 = physical id 0: core ids notes_plat_sysinfo_495 = 0-6,16-22,32-38,48-54,64-70,80-86,96-102,112-118,128-134,144-150,160-166,176-182,192-198,208-214,224-230, notes_plat_sysinfo_500 = 240-246 notes_plat_sysinfo_505 = physical id 1: core ids notes_plat_sysinfo_510 = 0-6,16-22,32-38,48-54,64-70,80-86,96-102,112-118,128-134,144-150,160-166,176-182,192-198,208-214,224-230, notes_plat_sysinfo_515 = 240-246 notes_plat_sysinfo_520 = physical id 0: apicids notes_plat_sysinfo_525 = 0-6,16-22,32-38,48-54,64-70,80-86,96-102,112-118,128-134,144-150,160-166,176-182,192-198,208-214,224-230, notes_plat_sysinfo_530 = 240-246 notes_plat_sysinfo_535 = physical id 1: apicids notes_plat_sysinfo_540 = 256-262,272-278,288-294,304-310,320-326,336-342,352-358,368-374,384-390,400-406,416-422,432-438,448-454,4 notes_plat_sysinfo_545 = 64-470,480-486,496-502 notes_plat_sysinfo_550 = Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for notes_plat_sysinfo_555 = virtualized systems. Use the above data carefully. notes_plat_sysinfo_560 = notes_plat_sysinfo_565 = ------------------------------------------------------------ notes_plat_sysinfo_570 = 7. lscpu notes_plat_sysinfo_575 = notes_plat_sysinfo_580 = From lscpu from util-linux 2.37.4: notes_plat_sysinfo_585 = Architecture: x86_64 notes_plat_sysinfo_590 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_595 = Address sizes: 52 bits physical, 57 bits virtual notes_plat_sysinfo_600 = Byte Order: Little Endian notes_plat_sysinfo_605 = CPU(s): 224 notes_plat_sysinfo_610 = On-line CPU(s) list: 0-223 notes_plat_sysinfo_615 = Vendor ID: AuthenticAMD notes_plat_sysinfo_620 = BIOS Vendor ID: Advanced Micro Devices, Inc. notes_plat_sysinfo_625 = Model name: AMD EPYC 9734 112-Core Processor notes_plat_sysinfo_630 = BIOS Model name: AMD EPYC 9734 112-Core Processor notes_plat_sysinfo_635 = CPU family: 25 notes_plat_sysinfo_640 = Model: 160 notes_plat_sysinfo_645 = Thread(s) per core: 1 notes_plat_sysinfo_650 = Core(s) per socket: 112 notes_plat_sysinfo_655 = Socket(s): 2 notes_plat_sysinfo_660 = Stepping: 2 notes_plat_sysinfo_665 = BogoMIPS: 4393.34 notes_plat_sysinfo_670 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 notes_plat_sysinfo_675 = clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm notes_plat_sysinfo_680 = constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf rapl notes_plat_sysinfo_685 = pni pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 x2apic movbe notes_plat_sysinfo_690 = popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy notes_plat_sysinfo_695 = abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext notes_plat_sysinfo_700 = perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 notes_plat_sysinfo_705 = invpcid_single hw_pstate ssbd mba ibrs ibpb stibp vmmcall fsgsbase bmi1 notes_plat_sysinfo_710 = avx2 smep bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap notes_plat_sysinfo_715 = avx512ifma clflushopt clwb avx512cd sha_ni avx512bw avx512vl xsaveopt notes_plat_sysinfo_720 = xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local notes_plat_sysinfo_725 = avx512_bf16 clzero irperf xsaveerptr rdpru wbnoinvd amd_ppin arat npt lbrv notes_plat_sysinfo_730 = svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists notes_plat_sysinfo_735 = pausefilter pfthreshold avic v_vmsave_vmload vgif v_spec_ctrl avx512vbmi notes_plat_sysinfo_740 = umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg notes_plat_sysinfo_745 = avx512_vpopcntdq la57 rdpid overflow_recov succor smca fsrm flush_l1d notes_plat_sysinfo_750 = Virtualization: AMD-V notes_plat_sysinfo_755 = L1d cache: 7 MiB (224 instances) notes_plat_sysinfo_760 = L1i cache: 7 MiB (224 instances) notes_plat_sysinfo_765 = L2 cache: 224 MiB (224 instances) notes_plat_sysinfo_770 = L3 cache: 512 MiB (32 instances) notes_plat_sysinfo_775 = NUMA node(s): 32 notes_plat_sysinfo_780 = NUMA node0 CPU(s): 0-6 notes_plat_sysinfo_785 = NUMA node1 CPU(s): 7-13 notes_plat_sysinfo_790 = NUMA node2 CPU(s): 56-62 notes_plat_sysinfo_795 = NUMA node3 CPU(s): 63-69 notes_plat_sysinfo_800 = NUMA node4 CPU(s): 28-34 notes_plat_sysinfo_805 = NUMA node5 CPU(s): 35-41 notes_plat_sysinfo_810 = NUMA node6 CPU(s): 84-90 notes_plat_sysinfo_815 = NUMA node7 CPU(s): 91-97 notes_plat_sysinfo_820 = NUMA node8 CPU(s): 42-48 notes_plat_sysinfo_825 = NUMA node9 CPU(s): 49-55 notes_plat_sysinfo_830 = NUMA node10 CPU(s): 98-104 notes_plat_sysinfo_835 = NUMA node11 CPU(s): 105-111 notes_plat_sysinfo_840 = NUMA node12 CPU(s): 14-20 notes_plat_sysinfo_845 = NUMA node13 CPU(s): 21-27 notes_plat_sysinfo_850 = NUMA node14 CPU(s): 70-76 notes_plat_sysinfo_855 = NUMA node15 CPU(s): 77-83 notes_plat_sysinfo_860 = NUMA node16 CPU(s): 112-118 notes_plat_sysinfo_865 = NUMA node17 CPU(s): 119-125 notes_plat_sysinfo_870 = NUMA node18 CPU(s): 168-174 notes_plat_sysinfo_875 = NUMA node19 CPU(s): 175-181 notes_plat_sysinfo_880 = NUMA node20 CPU(s): 140-146 notes_plat_sysinfo_885 = NUMA node21 CPU(s): 147-153 notes_plat_sysinfo_890 = NUMA node22 CPU(s): 196-202 notes_plat_sysinfo_895 = NUMA node23 CPU(s): 203-209 notes_plat_sysinfo_900 = NUMA node24 CPU(s): 154-160 notes_plat_sysinfo_905 = NUMA node25 CPU(s): 161-167 notes_plat_sysinfo_910 = NUMA node26 CPU(s): 210-216 notes_plat_sysinfo_915 = NUMA node27 CPU(s): 217-223 notes_plat_sysinfo_920 = NUMA node28 CPU(s): 126-132 notes_plat_sysinfo_925 = NUMA node29 CPU(s): 133-139 notes_plat_sysinfo_930 = NUMA node30 CPU(s): 182-188 notes_plat_sysinfo_935 = NUMA node31 CPU(s): 189-195 notes_plat_sysinfo_940 = Vulnerability Itlb multihit: Not affected notes_plat_sysinfo_945 = Vulnerability L1tf: Not affected notes_plat_sysinfo_950 = Vulnerability Mds: Not affected notes_plat_sysinfo_955 = Vulnerability Meltdown: Not affected notes_plat_sysinfo_960 = Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl notes_plat_sysinfo_965 = Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization notes_plat_sysinfo_970 = Vulnerability Spectre v2: Mitigation; Retpolines, IBPB conditional, IBRS_FW, STIBP disabled, RSB notes_plat_sysinfo_975 = filling notes_plat_sysinfo_980 = Vulnerability Srbds: Not affected notes_plat_sysinfo_985 = Vulnerability Tsx async abort: Not affected notes_plat_sysinfo_990 = notes_plat_sysinfo_995 = From lscpu --cache: notes_plat_sysinfo_1000= NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE notes_plat_sysinfo_1005= L1d 32K 7M 8 Data 1 64 1 64 notes_plat_sysinfo_1010= L1i 32K 7M 8 Instruction 1 64 1 64 notes_plat_sysinfo_1015= L2 1M 224M 8 Unified 2 2048 1 64 notes_plat_sysinfo_1020= L3 16M 512M 16 Unified 3 16384 1 64 notes_plat_sysinfo_1025= notes_plat_sysinfo_1030= ------------------------------------------------------------ notes_plat_sysinfo_1035= 8. numactl --hardware notes_plat_sysinfo_1040= NOTE: a numactl 'node' might or might not correspond to a physical chip. notes_plat_sysinfo_1045= available: 32 nodes (0-31) notes_plat_sysinfo_1050= node 0 cpus: 0-6 notes_plat_sysinfo_1055= node 0 size: 48136 MB notes_plat_sysinfo_1060= node 0 free: 47923 MB notes_plat_sysinfo_1065= node 1 cpus: 7-13 notes_plat_sysinfo_1070= node 1 size: 48382 MB notes_plat_sysinfo_1075= node 1 free: 48066 MB notes_plat_sysinfo_1080= node 2 cpus: 56-62 notes_plat_sysinfo_1085= node 2 size: 48382 MB notes_plat_sysinfo_1090= node 2 free: 48200 MB notes_plat_sysinfo_1095= node 3 cpus: 63-69 notes_plat_sysinfo_1100= node 3 size: 48382 MB notes_plat_sysinfo_1105= node 3 free: 48041 MB notes_plat_sysinfo_1110= node 4 cpus: 28-34 notes_plat_sysinfo_1115= node 4 size: 48382 MB notes_plat_sysinfo_1120= node 4 free: 48210 MB notes_plat_sysinfo_1125= node 5 cpus: 35-41 notes_plat_sysinfo_1130= node 5 size: 48382 MB notes_plat_sysinfo_1135= node 5 free: 48019 MB notes_plat_sysinfo_1140= node 6 cpus: 84-90 notes_plat_sysinfo_1145= node 6 size: 48382 MB notes_plat_sysinfo_1150= node 6 free: 47993 MB notes_plat_sysinfo_1155= node 7 cpus: 91-97 notes_plat_sysinfo_1160= node 7 size: 48382 MB notes_plat_sysinfo_1165= node 7 free: 48232 MB notes_plat_sysinfo_1170= node 8 cpus: 42-48 notes_plat_sysinfo_1175= node 8 size: 48382 MB notes_plat_sysinfo_1180= node 8 free: 48023 MB notes_plat_sysinfo_1185= node 9 cpus: 49-55 notes_plat_sysinfo_1190= node 9 size: 48382 MB notes_plat_sysinfo_1195= node 9 free: 48203 MB notes_plat_sysinfo_1200= node 10 cpus: 98-104 notes_plat_sysinfo_1205= node 10 size: 48382 MB notes_plat_sysinfo_1210= node 10 free: 48223 MB notes_plat_sysinfo_1215= node 11 cpus: 105-111 notes_plat_sysinfo_1220= node 11 size: 48382 MB notes_plat_sysinfo_1225= node 11 free: 48242 MB notes_plat_sysinfo_1230= node 12 cpus: 14-20 notes_plat_sysinfo_1235= node 12 size: 48382 MB notes_plat_sysinfo_1240= node 12 free: 48144 MB notes_plat_sysinfo_1245= node 13 cpus: 21-27 notes_plat_sysinfo_1250= node 13 size: 48382 MB notes_plat_sysinfo_1255= node 13 free: 48218 MB notes_plat_sysinfo_1260= node 14 cpus: 70-76 notes_plat_sysinfo_1265= node 14 size: 48382 MB notes_plat_sysinfo_1270= node 14 free: 48221 MB notes_plat_sysinfo_1275= node 15 cpus: 77-83 notes_plat_sysinfo_1280= node 15 size: 48382 MB notes_plat_sysinfo_1285= node 15 free: 48229 MB notes_plat_sysinfo_1290= node 16 cpus: 112-118 notes_plat_sysinfo_1295= node 16 size: 48382 MB notes_plat_sysinfo_1300= node 16 free: 48228 MB notes_plat_sysinfo_1305= node 17 cpus: 119-125 notes_plat_sysinfo_1310= node 17 size: 48382 MB notes_plat_sysinfo_1315= node 17 free: 48284 MB notes_plat_sysinfo_1320= node 18 cpus: 168-174 notes_plat_sysinfo_1325= node 18 size: 48382 MB notes_plat_sysinfo_1330= node 18 free: 48280 MB notes_plat_sysinfo_1335= node 19 cpus: 175-181 notes_plat_sysinfo_1340= node 19 size: 48382 MB notes_plat_sysinfo_1345= node 19 free: 48219 MB notes_plat_sysinfo_1350= node 20 cpus: 140-146 notes_plat_sysinfo_1355= node 20 size: 48382 MB notes_plat_sysinfo_1360= node 20 free: 48233 MB notes_plat_sysinfo_1365= node 21 cpus: 147-153 notes_plat_sysinfo_1370= node 21 size: 48382 MB notes_plat_sysinfo_1375= node 21 free: 48224 MB notes_plat_sysinfo_1380= node 22 cpus: 196-202 notes_plat_sysinfo_1385= node 22 size: 48382 MB notes_plat_sysinfo_1390= node 22 free: 48281 MB notes_plat_sysinfo_1395= node 23 cpus: 203-209 notes_plat_sysinfo_1400= node 23 size: 48382 MB notes_plat_sysinfo_1405= node 23 free: 48284 MB notes_plat_sysinfo_1410= node 24 cpus: 154-160 notes_plat_sysinfo_1415= node 24 size: 48382 MB notes_plat_sysinfo_1420= node 24 free: 48222 MB notes_plat_sysinfo_1425= node 25 cpus: 161-167 notes_plat_sysinfo_1430= node 25 size: 48345 MB notes_plat_sysinfo_1435= node 25 free: 48253 MB notes_plat_sysinfo_1440= node 26 cpus: 210-216 notes_plat_sysinfo_1445= node 26 size: 48382 MB notes_plat_sysinfo_1450= node 26 free: 48229 MB notes_plat_sysinfo_1455= node 27 cpus: 217-223 notes_plat_sysinfo_1460= node 27 size: 48309 MB notes_plat_sysinfo_1465= node 27 free: 48154 MB notes_plat_sysinfo_1470= node 28 cpus: 126-132 notes_plat_sysinfo_1475= node 28 size: 48382 MB notes_plat_sysinfo_1480= node 28 free: 48274 MB notes_plat_sysinfo_1485= node 29 cpus: 133-139 notes_plat_sysinfo_1490= node 29 size: 48382 MB notes_plat_sysinfo_1495= node 29 free: 48195 MB notes_plat_sysinfo_1500= node 30 cpus: 182-188 notes_plat_sysinfo_1505= node 30 size: 48382 MB notes_plat_sysinfo_1510= node 30 free: 48210 MB notes_plat_sysinfo_1515= node 31 cpus: 189-195 notes_plat_sysinfo_1520= node 31 size: 48382 MB notes_plat_sysinfo_1525= node 31 free: 48222 MB notes_plat_sysinfo_1530= node distances: notes_plat_sysinfo_1535= node 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 notes_plat_sysinfo_1540= 25 26 27 28 29 30 31 notes_plat_sysinfo_1545= 0: 10 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1550= 32 32 32 32 32 32 32 notes_plat_sysinfo_1555= 1: 11 10 11 11 11 11 11 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1560= 32 32 32 32 32 32 32 notes_plat_sysinfo_1565= 2: 11 11 10 11 11 11 11 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1570= 32 32 32 32 32 32 32 notes_plat_sysinfo_1575= 3: 11 11 11 10 11 11 11 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1580= 32 32 32 32 32 32 32 notes_plat_sysinfo_1585= 4: 11 11 11 11 10 11 11 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1590= 32 32 32 32 32 32 32 notes_plat_sysinfo_1595= 5: 11 11 11 11 11 10 11 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1600= 32 32 32 32 32 32 32 notes_plat_sysinfo_1605= 6: 11 11 11 11 11 11 10 11 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1610= 32 32 32 32 32 32 32 notes_plat_sysinfo_1615= 7: 11 11 11 11 11 11 11 10 11 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1620= 32 32 32 32 32 32 32 notes_plat_sysinfo_1625= 8: 11 11 11 11 11 11 11 11 10 11 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1630= 32 32 32 32 32 32 32 notes_plat_sysinfo_1635= 9: 11 11 11 11 11 11 11 11 11 10 11 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1640= 32 32 32 32 32 32 32 notes_plat_sysinfo_1645= 10: 11 11 11 11 11 11 11 11 11 11 10 11 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1650= 32 32 32 32 32 32 32 notes_plat_sysinfo_1655= 11: 11 11 11 11 11 11 11 11 11 11 11 10 11 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1660= 32 32 32 32 32 32 32 notes_plat_sysinfo_1665= 12: 11 11 11 11 11 11 11 11 11 11 11 11 10 11 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1670= 32 32 32 32 32 32 32 notes_plat_sysinfo_1675= 13: 11 11 11 11 11 11 11 11 11 11 11 11 11 10 11 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1680= 32 32 32 32 32 32 32 notes_plat_sysinfo_1685= 14: 11 11 11 11 11 11 11 11 11 11 11 11 11 11 10 11 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1690= 32 32 32 32 32 32 32 notes_plat_sysinfo_1695= 15: 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 10 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1700= 32 32 32 32 32 32 32 notes_plat_sysinfo_1705= 16: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 10 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1710= 11 11 11 11 11 11 11 notes_plat_sysinfo_1715= 17: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 10 11 11 11 11 11 11 11 notes_plat_sysinfo_1720= 11 11 11 11 11 11 11 notes_plat_sysinfo_1725= 18: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 10 11 11 11 11 11 11 notes_plat_sysinfo_1730= 11 11 11 11 11 11 11 notes_plat_sysinfo_1735= 19: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 10 11 11 11 11 11 notes_plat_sysinfo_1740= 11 11 11 11 11 11 11 notes_plat_sysinfo_1745= 20: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 10 11 11 11 11 notes_plat_sysinfo_1750= 11 11 11 11 11 11 11 notes_plat_sysinfo_1755= 21: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 10 11 11 11 notes_plat_sysinfo_1760= 11 11 11 11 11 11 11 notes_plat_sysinfo_1765= 22: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 10 11 11 notes_plat_sysinfo_1770= 11 11 11 11 11 11 11 notes_plat_sysinfo_1775= 23: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 10 11 notes_plat_sysinfo_1780= 11 11 11 11 11 11 11 notes_plat_sysinfo_1785= 24: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 10 notes_plat_sysinfo_1790= 11 11 11 11 11 11 11 notes_plat_sysinfo_1795= 25: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1800= 10 11 11 11 11 11 11 notes_plat_sysinfo_1805= 26: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1810= 11 10 11 11 11 11 11 notes_plat_sysinfo_1815= 27: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1820= 11 11 10 11 11 11 11 notes_plat_sysinfo_1825= 28: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1830= 11 11 11 10 11 11 11 notes_plat_sysinfo_1835= 29: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1840= 11 11 11 11 10 11 11 notes_plat_sysinfo_1845= 30: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1850= 11 11 11 11 11 10 11 notes_plat_sysinfo_1855= 31: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 11 11 11 11 11 11 notes_plat_sysinfo_1860= 11 11 11 11 11 11 10 notes_plat_sysinfo_1865= notes_plat_sysinfo_1870= ------------------------------------------------------------ notes_plat_sysinfo_1875= 9. /proc/meminfo notes_plat_sysinfo_1880= MemTotal: 1585029248 kB notes_plat_sysinfo_1885= notes_plat_sysinfo_1890= ------------------------------------------------------------ notes_plat_sysinfo_1895= 10. who -r notes_plat_sysinfo_1900= run-level 3 Jun 30 16:27 notes_plat_sysinfo_1905= notes_plat_sysinfo_1910= ------------------------------------------------------------ notes_plat_sysinfo_1915= 11. Systemd service manager version: systemd 250 (250-6.el9_0) notes_plat_sysinfo_1920= Default Target Status notes_plat_sysinfo_1925= multi-user running notes_plat_sysinfo_1930= notes_plat_sysinfo_1935= ------------------------------------------------------------ notes_plat_sysinfo_1940= 12. Services, from systemctl list-unit-files notes_plat_sysinfo_1945= STATE UNIT FILES notes_plat_sysinfo_1950= enabled NetworkManager NetworkManager-dispatcher NetworkManager-wait-online auditd crond notes_plat_sysinfo_1955= dbus-broker firewalld getty@ irqbalance kdump lvm2-monitor mdmonitor microcode notes_plat_sysinfo_1960= nis-domainname rhsmcertd rsyslog selinux-autorelabel-mark sshd sssd notes_plat_sysinfo_1965= systemd-network-generator tuned udisks2 upower notes_plat_sysinfo_1970= enabled-runtime systemd-remount-fs notes_plat_sysinfo_1975= disabled blk-availability canberra-system-bootup canberra-system-shutdown notes_plat_sysinfo_1980= canberra-system-shutdown-reboot chrony-wait chronyd console-getty cpupower debug-shell notes_plat_sysinfo_1985= hwloc-dump-hwdata kvm_stat man-db-restart-cache-update nftables rdisc rhsm rhsm-facts notes_plat_sysinfo_1990= rpmdb-rebuild serial-getty@ sshd-keygen@ systemd-boot-check-no-failures systemd-pstore notes_plat_sysinfo_1995= systemd-sysext notes_plat_sysinfo_2000= indirect sssd-autofs sssd-kcm sssd-nss sssd-pac sssd-pam sssd-ssh sssd-sudo notes_plat_sysinfo_2005= notes_plat_sysinfo_2010= ------------------------------------------------------------ notes_plat_sysinfo_2015= 13. Linux kernel boot-time arguments, from /proc/cmdline notes_plat_sysinfo_2020= BOOT_IMAGE=(hd0,gpt2)/vmlinuz-5.14.0-70.13.1.el9_0.x86_64 notes_plat_sysinfo_2025= root=/dev/mapper/rhel-root notes_plat_sysinfo_2030= ro notes_plat_sysinfo_2035= resume=/dev/mapper/rhel-swap notes_plat_sysinfo_2040= rd.lvm.lv=rhel/root notes_plat_sysinfo_2045= rd.lvm.lv=rhel/swap notes_plat_sysinfo_2050= notes_plat_sysinfo_2055= ------------------------------------------------------------ notes_plat_sysinfo_2060= 14. cpupower frequency-info notes_plat_sysinfo_2065= analyzing CPU 0: notes_plat_sysinfo_2070= Unable to determine current policy notes_plat_sysinfo_2075= boost state support: notes_plat_sysinfo_2080= Supported: yes notes_plat_sysinfo_2085= Active: yes notes_plat_sysinfo_2090= Boost States: 0 notes_plat_sysinfo_2095= Total States: 3 notes_plat_sysinfo_2100= Pstate-P0: 2200MHz notes_plat_sysinfo_2105= notes_plat_sysinfo_2110= ------------------------------------------------------------ notes_plat_sysinfo_2115= 15. tuned-adm active notes_plat_sysinfo_2120= Current active profile: throughput-performance notes_plat_sysinfo_2125= notes_plat_sysinfo_2130= ------------------------------------------------------------ notes_plat_sysinfo_2135= 16. sysctl notes_plat_sysinfo_2140= kernel.numa_balancing 1 notes_plat_sysinfo_2145= kernel.randomize_va_space 0 notes_plat_sysinfo_2150= vm.compaction_proactiveness 20 notes_plat_sysinfo_2155= vm.dirty_background_bytes 0 notes_plat_sysinfo_2160= vm.dirty_background_ratio 10 notes_plat_sysinfo_2165= vm.dirty_bytes 0 notes_plat_sysinfo_2170= vm.dirty_expire_centisecs 3000 notes_plat_sysinfo_2175= vm.dirty_ratio 8 notes_plat_sysinfo_2180= vm.dirty_writeback_centisecs 500 notes_plat_sysinfo_2185= vm.dirtytime_expire_seconds 43200 notes_plat_sysinfo_2190= vm.extfrag_threshold 500 notes_plat_sysinfo_2195= vm.min_unmapped_ratio 1 notes_plat_sysinfo_2200= vm.nr_hugepages 0 notes_plat_sysinfo_2205= vm.nr_hugepages_mempolicy 0 notes_plat_sysinfo_2210= vm.nr_overcommit_hugepages 0 notes_plat_sysinfo_2215= vm.swappiness 1 notes_plat_sysinfo_2220= vm.watermark_boost_factor 15000 notes_plat_sysinfo_2225= vm.watermark_scale_factor 10 notes_plat_sysinfo_2230= vm.zone_reclaim_mode 1 notes_plat_sysinfo_2235= notes_plat_sysinfo_2240= ------------------------------------------------------------ notes_plat_sysinfo_2245= 17. /sys/kernel/mm/transparent_hugepage notes_plat_sysinfo_2250= defrag [always] defer defer+madvise madvise never notes_plat_sysinfo_2255= enabled [always] madvise never notes_plat_sysinfo_2260= hpage_pmd_size 2097152 notes_plat_sysinfo_2265= shmem_enabled always within_size advise [never] deny force notes_plat_sysinfo_2270= notes_plat_sysinfo_2275= ------------------------------------------------------------ notes_plat_sysinfo_2280= 18. /sys/kernel/mm/transparent_hugepage/khugepaged notes_plat_sysinfo_2285= alloc_sleep_millisecs 60000 notes_plat_sysinfo_2290= defrag 1 notes_plat_sysinfo_2295= max_ptes_none 511 notes_plat_sysinfo_2300= max_ptes_shared 256 notes_plat_sysinfo_2305= max_ptes_swap 64 notes_plat_sysinfo_2310= pages_to_scan 4096 notes_plat_sysinfo_2315= scan_sleep_millisecs 10000 notes_plat_sysinfo_2320= notes_plat_sysinfo_2325= ------------------------------------------------------------ notes_plat_sysinfo_2330= 19. OS release notes_plat_sysinfo_2335= From /etc/*-release /etc/*-version notes_plat_sysinfo_2340= os-release Red Hat Enterprise Linux 9.0 (Plow) notes_plat_sysinfo_2345= redhat-release Red Hat Enterprise Linux release 9.0 (Plow) notes_plat_sysinfo_2350= system-release Red Hat Enterprise Linux release 9.0 (Plow) notes_plat_sysinfo_2355= notes_plat_sysinfo_2360= ------------------------------------------------------------ notes_plat_sysinfo_2365= 20. Disk information notes_plat_sysinfo_2370= SPEC is set to: /home/new_cpu2017 notes_plat_sysinfo_2375= Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_2380= /dev/mapper/rhel-home xfs 372G 21G 352G 6% /home notes_plat_sysinfo_2385= notes_plat_sysinfo_2390= ------------------------------------------------------------ notes_plat_sysinfo_2395= 21. /sys/devices/virtual/dmi/id notes_plat_sysinfo_2400= Vendor: HPE notes_plat_sysinfo_2405= Product: ProLiant DL365 Gen11 notes_plat_sysinfo_2410= Product Family: ProLiant notes_plat_sysinfo_2415= Serial: DL365G11-003 notes_plat_sysinfo_2420= notes_plat_sysinfo_2425= ------------------------------------------------------------ notes_plat_sysinfo_2430= 22. dmidecode notes_plat_sysinfo_2435= Additional information from dmidecode 3.3 follows. WARNING: Use caution when you interpret this section. notes_plat_sysinfo_2440= The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_2445= determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the notes_plat_sysinfo_2450= "DMTF SMBIOS" standard. notes_plat_sysinfo_2455= Memory: notes_plat_sysinfo_2460= 18x Hynix HMCG94AEBRA103N 64 GB 2 rank 4800 notes_plat_sysinfo_2465= 5x Hynix HMCG94MEBRA121N 64 GB 2 rank 4800 notes_plat_sysinfo_2470= 1x Hynix HMCG94MEBRA123N 64 GB 2 rank 4800 notes_plat_sysinfo_2475= notes_plat_sysinfo_2480= notes_plat_sysinfo_2485= ------------------------------------------------------------ notes_plat_sysinfo_2490= 23. BIOS notes_plat_sysinfo_2495= (This section combines info from /sys/devices and dmidecode.) notes_plat_sysinfo_2500= BIOS Vendor: HPE notes_plat_sysinfo_2505= BIOS Version: 1.30 notes_plat_sysinfo_2510= BIOS Date: 03/06/2023 notes_plat_sysinfo_2515= BIOS Revision: 1.30 notes_plat_sysinfo_2520= Firmware Revision: 1.40 hw_cpu_name = AMD EPYC 9734 hw_disk = 372 GB add more disk info here hw_memory001 = 1511.602 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 2 hw_ncores = 224 hw_nthreadspercore = 1 prepared_by = root (is never output, only tags rawfile) sw_file = xfs sw_os001 = Red Hat Enterprise Linux 9.0 (Plow) sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program 654.roms_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 644.nab_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 638.imagick_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 627.cam4_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 607.cactuBSSN_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: power_management000 = BIOS and OS set to prefer performance at power_management001 = the cost of additional power usage notes_plat_000 =BIOS Configuration notes_plat_005 = Workload Profile set to General Peak Frequency Compute notes_plat_010 = AMD SMT Option set to Disabled notes_plat_015 = Determinism Control set to Manual notes_plat_020 = Performance Determinism set to Power Deterministic notes_plat_025 = Last-Level Cache (LLC) as NUMA Node set to Enabled notes_plat_030 = ACPI CST C2 Latency set to 18 microseconds notes_plat_035 = Thermal Configuration set to Maximum Cooling