# Invocation command line: # /home/Benchmark/speccpu2017-1.1.0/bin/harness/runcpu --define default-platform-flags --configfile ic19.0u5-lin-core-avx2-speed-20190416.cfg --define cores=2 --tune all --output_format all --define intspeedaffinity --define smt-on --define drop_caches --nopower --runmode speed --tune base:peak --size refspeed intspeed # output_root was not used for this run ############################################################################ #------------------------------------------------------------------------------ # This is a sample SPEC CPU2017 config file. It is applicable for: # # Compiler name/version: Intel(R) C/C++ and Fortran 19.0u4 Compilers for Linux # Operating system version: Redhat Enterprise Linux 7.5, GLIBC 2.17 # Hardware: Intel(R) processors supporting CORE-AVX2 tuning # # If you wish to build your own: # (1) Copy this to a new name # cd %SPEC%/config # copy this.cfg that.cfg # (2) Change items that are marked 'EDIT' (search for it) # # If you have different software or hardware, this config file may not work. # You may find a better config file for your system next to posted results: # http://www.spec.org/cpu2017/results # # Compiler issues: Contact your compiler vendor, not SPEC. # For SPEC help: http://www.spec.org/auto/cpu2017/Docs/techsupport.html #------------------------------------------------------------------------------ #--------- Preprocessor ------------------------------------------------------- # # Optionally edit if you wish: %define build_ncpus 8 # controls number of simultaneous compiles # Used to date the label %define version 20190416 # Used for the optimization tuning part of the label (not required) %if defined(%{noopt}) %define opt_label -noopt %elif defined(%{medopt}) %define opt_label -medopt %else %define opt_label %endif # Used for labeling static linked builds (not required) %if defined(%{static}) %define static_label -static %else %define static_label %endif #--------- Label -------------------------------------------------------------- # Arbitrary string, tags your binaries & directories. # Two Suggestions: # (1) Change this label as you try new ideas. label = ic19.0u5-lin-core-avx2-speed%{opt_label}%{static_label}-%{version} # (2) Make the label meaningful to YOU. #--------- Global Settings ---------------------------------------------------- # For info, see: # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname XXX # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#tune ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'label' to track binaries. # ######################################################## # # vvvvvvvvvvvv # do not change unless you read NOTE above # fail_build=0 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate command_add_redirect = 1 line_width = 1020 log_line_width = 1020 makeflags = -j%{build_ncpus} output_format = txt,cfg,pdf,csv preenv = 1 tune = base bench_post_setup = sync parallel_test = 1 mean_anyway = 1 reportable = 1 # Set some environment variables preENV_OMP_STACKSIZE = 192M %ifdef %{intspeedaffinity} preENV_KMP_AFFINITY = granularity=fine,scatter %else %if defined(%{smt-on}) preENV_KMP_AFFINITY = granularity=fine,compact,1,0 %else preENV_KMP_AFFINITY = granularity=fine,compact %endif %endif #Reference the flags files flagsurl000=http://www.spec.org/cpu2017/flags/Intel-ic19.0u1-official-linux64.2019-07-09.xml %ifdef %{default-platform-flags} flagsurl001=http://www.spec.org/cpu2017/flags/Fujitsu-Platform-Settings-V1.0.2-CFL-RevD.xml %endif # Set some environment variables intspeed: preENV_LD_LIBRARY_PATH = $[top]/lib/intel64:$[top]/je5.0.1-64 fpspeed: preENV_LD_LIBRARY_PATH = $[top]/lib/intel64 #--------- Compilers ---------------------------------------------------------- intspeed,fpspeed: CC = icc -m64 -std=c11 CXX = icpc -m64 FC = ifort -m64 # How to say "Show me your version, please" CC_VERSION_OPTION = -V CXX_VERSION_OPTION = -V FC_VERSION_OPTION = -V JEMALLOC32_DIR = /usr/local/je5.0.1-32/lib JEMALLOC64_DIR = /usr/local/je5.0.1-64/lib INTEL64_DIR = /usr/local/IntelCompiler19/compilers_and_libraries_2019.4.227/linux/compiler/lib/intel64 %if !defined(%{static}) JEMALLOC32 = jemalloc JEMALLOC64 = jemalloc QKMALLOC = qkmalloc %else JEMALLOC32 = libjemalloc.a JEMALLOC64 = libjemalloc.a %endif #--------- Portability -------------------------------------------------------- intspeed,fpspeed: PORTABILITY = -DSPEC_LP64 600.perlbench_s: CPORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -convert big_endian 623.xalancbmk_s: CXXPORTABILITY= -DSPEC_LINUX 627.cam4_s: CPORTABILITY= -DSPEC_CASE_FLAG 628.pop2_s: CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -convert big_endian -assume byterecl #--------- How Many CPUs? ----------------------------------------------------- # Both SPECrate and SPECspeed can test multiple chips / cores / hw threads # - For SPECspeed, you set the number of threads. # See: https://www.spec.org/cpu2017/Docs/system-requirements.html#MultipleCPUs # # q. How many should I set? # a. Unknown, you will have to try it and see! # # To get you started, some suggestions: # # threads - This config file sets a starting point. You could try raising # it. A higher thread count is much more likely to be useful for # fpspeed than for intspeed. # default: %if !defined(%{cores}) %error please add --define cores=[ncores] to runcpu invocation %endif threads = %{cores} # EDIT to change number of OpenMP threads (see above) %ifdef %{smt-on} %define numpeakthreads %{cores} * 2 %endif intspeed: %define numxzthreads %{cores} * 2 %ifdef %{smt-on} threads = %{numxzthreads} %else threads = %{cores} %endif #-------- Tuning Flags ---------------------------------------------- intrate,fprate: #reconsider using a rate config file instead of a speed config file fail=1 intspeed,fpspeed: # Compiler tuning toggle, corresponds with isa_ext preprocessor cfg var SSE = -xCORE-AVX2 EXTRA_FOPTIMIZE = -nostandard-realloc-lhs %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -ipo -O3 -no-prec-div %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static intspeed_any_c: EXTRA_LIBS = -L$(JEMALLOC64_DIR) -l$(JEMALLOC64) EXTRA_LDFLAGS = -Wl,-z,muldefs intspeed_any_cpp: EXTRA_LIBS = -L$(INTEL64_DIR) -l$(QKMALLOC) EXTRA_LDFLAGS = -Wl,-z,muldefs intspeed=base=default: %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -qopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -qopenmp -DSPEC_OPENMP -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif fpspeed=base=default: %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -qopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(OPT_ROOT) -qopenmp -DSPEC_OPENMP FOPTIMIZE = $(OPT_ROOT) -qopenmp -DSPEC_OPENMP %endif %else COPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP FOPTIMIZE = $(FORT_FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -qopenmp -DSPEC_OPENMP -static CXXOPTIMIZE = $(OPT_ROOT) -qopenmp -DSPEC_OPENMP -static FOPTIMIZE = $(OPT_ROOT) -qopenmp -DSPEC_OPENMP -static %endif %endif default=peak=default: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT) -static fpspeed,intspeed_any_c=peak: OPT_ROOT_PASS1 = -O2 OPT_ROOT_PASS2 = -ipo -O3 -no-prec-div FAST_NO_STATIC_PASS1 = $(OPT_ROOT_PASS1) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT_PASS1) FAST_PASS1 = $(OPT_ROOT_PASS1) -static FORT_FAST_PASS1 = $(OPT_ROOT_PASS1) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT_PASS2) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT_PASS2) FAST_PASS2 = $(SSE) $(OPT_ROOT_PASS2) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT_PASS2) -static 602.gcc_s=peak: EXTRA_LDFLAGS = -Wl,-z,muldefs PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=4 605.mcf_s,631.deepsjeng_s=peak: FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT) -static 620.omnetpp_s=peak: PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=4 FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static EXTRA_LIBS = -L$(INTEL64_DIR) -l$(QKMALLOC) EXTRA_LDFLAGS = -Wl,-z,muldefs intspeed=peak=default: %if !defined(%{static}) PASS1_COPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=4 -DSPEC_SUPPRESS_OPENMP PASS1_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=4 -DSPEC_SUPPRESS_OPENMP PASS1_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=4 -DSPEC_SUPPRESS_OPENMP PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP PASS2_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP %else PASS1_COPTIMIZE = $(FAST_PASS1) -qopt-mem-layout-trans=4 -DSPEC_SUPPRESS_OPENMP PASS1_CXXOPTIMIZE = $(FAST_PASS1) -qopt-mem-layout-trans=4 -DSPEC_SUPPRESS_OPENMP PASS1_FOPTIMIZE = $(FORT_FAST_PASS1) -qopt-mem-layout-trans=4 -DSPEC_SUPPRESS_OPENMP PASS2_COPTIMIZE = $(FAST_PASS2) -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP PASS2_CXXOPTIMIZE = $(FAST_PASS2) -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP PASS2_FOPTIMIZE = $(FORT_FAST_PASS2) -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP %endif fpspeed=peak=default: %if !defined(%{static}) PASS1_COPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -DSPEC_SUPPRESS_OPENMP PASS1_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -DSPEC_SUPPRESS_OPENMP PASS1_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -DSPEC_SUPPRESS_OPENMP PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP PASS2_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP %else PASS1_COPTIMIZE = $(FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -DSPEC_SUPPRESS_OPENMP PASS1_CXXOPTIMIZE = $(FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -DSPEC_SUPPRESS_OPENMP PASS1_FOPTIMIZE = $(FORT_FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -DSPEC_SUPPRESS_OPENMP PASS2_COPTIMIZE = $(FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP PASS2_CXXOPTIMIZE = $(FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP PASS2_FOPTIMIZE = $(FORT_FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP %endif #some benchmarks do not mind sharing cores %ifdef %{smt-on} 627.cam4_s,628.pop2_s,644.nab_s=peak: threads = %{numpeakthreads} %endif 600.perlbench_s=peak=default: #[56]00.perlbench[rs] has non standard signed overflow EXTRA_OPTIMIZE = -fno-strict-overflow #fp no FDO 607.cactuBSSN_s,619.lbm_s,627.cam4_s,638.imagick_s,644.nab_s,654.roms_s=peak: feedback = 0 %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -qopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(OPT_ROOT) -qopenmp -DSPEC_OPENMP FOPTIMIZE = $(OPT_ROOT) -qopenmp -DSPEC_OPENMP %endif %else COPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP FOPTIMIZE = $(FORT_FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -qopenmp -DSPEC_OPENMP -static CXXOPTIMIZE = $(OPT_ROOT) -qopenmp -DSPEC_OPENMP -static FOPTIMIZE = $(OPT_ROOT) -qopenmp -DSPEC_OPENMP -static %endif %endif #int no FDO 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: feedback = 0 %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 -qopenmp -DSPEC_OPENMP CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %endif #------------------------------------------------------------------------------- # Tester and System Descriptions - EDIT the sections below #------------------------------------------------------------------------------- # For info about any field, see # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#hw_memory #------------------------------------------------------------------------------- #--------- If you install new compilers, EDIT this section -------------------- intrate,intspeed,fpspeed,fprate: sw_compiler000 = C/C++: Version 19.0.5.281 of sw_compiler001 = Intel C/C++ Compiler for Linux; sw_compiler002 = Fortran: Version 19.0.5.281 of sw_compiler003 = Intel Fortran Compiler for Linux sw_base_ptrsize = 64-bit fprate,fpspeed: sw_peak_ptrsize = 64-bit intspeed: sw_peak_ptrsize = 64-bit sw_other = jemalloc memory allocator V5.0.1 power_management = BIOS set to prefer performance at the cost of additional power usage intrate: sw_peak_ptrsize = 32/64-bit sw_other001 = jemalloc memory allocator V5.0.1 #--------- EDIT Your info --------------------------------------------------------- # To understand the difference between hw_vendor/sponsor/tester, see: # www.spec.org/auto/cpu2017/Docs/config.html#test_sponsor intrate,intspeed,fprate,fpspeed: # Important: keep this line hw_vendor = Fujitsu tester = Fujitsu test_sponsor = Fujitsu license_num = 19 prepared_by = Fujitsu #--------- EDIT system availability dates and system information ---------------------------------------------- intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field hw_avail = Oct-2019 sw_avail = Sep-2019 hw_cpu_nominal_mhz = 3600 hw_cpu_max_mhz = 4200 hw_ncores = 4 hw_nthreadspercore = 1 hw_ncpuorder = 1 chip hw_model000 = PRIMERGY TX1330 M4, Intel Core i3-9100, hw_model001 = 3.60 GHz hw_other = None # sw_other = # TurboHeap Library V8.1 # Other perf-relevant sw, or "None" hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 6 MB I+D on chip per chip hw_ocache = None # hw_memory001 = # 4 TB (256 x 16 GB 2Rx4 PC4-2133P-R, # N GB (M x N GB nRxn # hw_memory002 = # running at 1600 MHz) # PCn-nnnnnR-n[, ECC and other info]) #--------- Sysinfo fields - You may need to adjust this section --------------- # Note: Some commented-out fields above are automatically set to preliminary # values by sysinfo # www.spec.org/auto/cpu2017/Docs/config.html#sysinfo # Uncomment lines for which you already have a better answer than sysinfo # intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field # hw_cpu_name = # Intel Xeon E9-9999 v9 # chip name # hw_disk = # 9 x 9 TB SATA III 9999 RPM # Size, type, other perf-relevant info # hw_nchips = # 99 # number chips enabled # sw_file = # ext99 # File system # sw_state = # Run level 99 # Software state. # sw_os001 = # Linux Sailboat # Operating system # sw_os002 = # Distribution 7.2 SP1 # and version #--------- EDIT Intel Recommended Fields - You may wish to adjust this section ----- default: notes_000 = Environment variables set by runcpu before the start of the run: notes_005 = KMP_AFFINITY = "granularity=fine,scatter" notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" notes_os_005 = Kernel Boot Parameter set with: nohz_full=1-15 #Ease of tagging results from the runcpu command line with commands run outside of runcpu harneess #Adjust as necessary for your SUT %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else notes_010 = LD_LIBRARY_PATH = "/home/Benchmark/speccpu2017-1.1.0/lib/intel64" %endif %ifdef %{drop_caches} notes_015 = OMP_STACKSIZE = "192M" notes_020 = Binaries compiled on a system with 1x Intel Xeon E-2288G CPU + 64 GB RAM notes_025 = memory using Redhat Enterprise Linux 7.6 notes_030 = Transparent Huge Pages enabled by default notes_035 = Prior to runcpu invocation notes_040 = Filesystem page cache synced and cleared with: notes_045 = sync; echo 3> /proc/sys/vm/drop_caches notes_050 = jemalloc: configured and built at default for 32bit (i686) and 64bit (x86_64) targets notes_055 = jemalloc: built with the RedHat Enterprise 7.4, and the system compiler gcc 4.8.5 notes_060 = jemalloc: sources available via jemalloc.net notes_065 = Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_070 = is mitigated in the system as tested and documented. notes_075 = Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_080 = is mitigated in the system as tested and documented. notes_085 = Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_090 = is mitigated in the system as tested and documented. %endif %ifdef %{invoke_with_interleave} notes_205 = runcpu command invoked through numactl i.e.: notes_206 = numactl --interleave=all runcpu %endif intrate,fprate: %if defined(%{no-numa}) notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %else notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %endif intrate,intspeed: # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:1b187da62efa5d65f0e989c214b6a257d16a31d3cf135973c9043da741052207) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /home/Benchmark/speccpu2017-1.1.0/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6365 of 2019-08-21 295195f888a3d7edb1e6e46a485a0011 notes_plat_sysinfo_015 = running on localhost.localdomain Tue Dec 10 08:29:39 2019 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = For more information on this section, see notes_plat_sysinfo_035 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Core(TM) i3-9100 CPU @ 3.60GHz notes_plat_sysinfo_055 = 1 "physical id"s (chips) notes_plat_sysinfo_060 = 4 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_070 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_075 = cpu cores : 4 notes_plat_sysinfo_080 = siblings : 4 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 notes_plat_sysinfo_090 = notes_plat_sysinfo_095 = From lscpu: notes_plat_sysinfo_100 = Architecture: x86_64 notes_plat_sysinfo_105 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_110 = Byte Order: Little Endian notes_plat_sysinfo_115 = CPU(s): 4 notes_plat_sysinfo_120 = On-line CPU(s) list: 0-3 notes_plat_sysinfo_125 = Thread(s) per core: 1 notes_plat_sysinfo_130 = Core(s) per socket: 4 notes_plat_sysinfo_135 = Socket(s): 1 notes_plat_sysinfo_140 = NUMA node(s): 1 notes_plat_sysinfo_145 = Vendor ID: GenuineIntel notes_plat_sysinfo_150 = CPU family: 6 notes_plat_sysinfo_155 = Model: 158 notes_plat_sysinfo_160 = Model name: Intel(R) Core(TM) i3-9100 CPU @ 3.60GHz notes_plat_sysinfo_165 = Stepping: 11 notes_plat_sysinfo_170 = CPU MHz: 4197.875 notes_plat_sysinfo_175 = CPU max MHz: 4200.0000 notes_plat_sysinfo_180 = CPU min MHz: 800.0000 notes_plat_sysinfo_185 = BogoMIPS: 7200.00 notes_plat_sysinfo_190 = Virtualization: VT-x notes_plat_sysinfo_195 = L1d cache: 32K notes_plat_sysinfo_200 = L1i cache: 32K notes_plat_sysinfo_205 = L2 cache: 256K notes_plat_sysinfo_210 = L3 cache: 6144K notes_plat_sysinfo_215 = NUMA node0 CPU(s): 0-3 notes_plat_sysinfo_220 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov notes_plat_sysinfo_225 = pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp notes_plat_sysinfo_230 = lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc notes_plat_sysinfo_235 = aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma notes_plat_sysinfo_240 = cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave notes_plat_sysinfo_245 = avx f16c rdrand lahf_lm abm 3dnowprefetch epb intel_pt ssbd ibrs ibpb stibp notes_plat_sysinfo_250 = tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms notes_plat_sysinfo_255 = invpcid mpx rdseed adx smap clflushopt xsaveopt xsavec xgetbv1 dtherm ida arat pln notes_plat_sysinfo_260 = pts hwp hwp_notify hwp_act_window hwp_epp spec_ctrl intel_stibp flush_l1d notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = /proc/cpuinfo cache data notes_plat_sysinfo_275 = cache size : 6144 KB notes_plat_sysinfo_280 = notes_plat_sysinfo_285 = From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a notes_plat_sysinfo_290 = physical chip. notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = From /proc/meminfo notes_plat_sysinfo_305 = MemTotal: 65724644 kB notes_plat_sysinfo_310 = HugePages_Total: 0 notes_plat_sysinfo_315 = Hugepagesize: 2048 kB notes_plat_sysinfo_320 = notes_plat_sysinfo_325 = From /etc/*release* /etc/*version* notes_plat_sysinfo_330 = os-release: notes_plat_sysinfo_335 = NAME="Red Hat Enterprise Linux Server" notes_plat_sysinfo_340 = VERSION="7.6 (Maipo)" notes_plat_sysinfo_345 = ID="rhel" notes_plat_sysinfo_350 = ID_LIKE="fedora" notes_plat_sysinfo_355 = VARIANT="Server" notes_plat_sysinfo_360 = VARIANT_ID="server" notes_plat_sysinfo_365 = VERSION_ID="7.6" notes_plat_sysinfo_370 = PRETTY_NAME="Red Hat Enterprise Linux Server 7.6 (Maipo)" notes_plat_sysinfo_375 = redhat-release: Red Hat Enterprise Linux Server release 7.6 (Maipo) notes_plat_sysinfo_380 = system-release: Red Hat Enterprise Linux Server release 7.6 (Maipo) notes_plat_sysinfo_385 = system-release-cpe: cpe:/o:redhat:enterprise_linux:7.6:ga:server notes_plat_sysinfo_390 = notes_plat_sysinfo_395 = uname -a: notes_plat_sysinfo_400 = Linux localhost.localdomain 3.10.0-957.el7.x86_64 #1 SMP Thu Oct 4 20:48:51 UTC 2018 notes_plat_sysinfo_405 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_410 = notes_plat_sysinfo_415 = Kernel self-reported vulnerability status: notes_plat_sysinfo_420 = notes_plat_sysinfo_425 = CVE-2018-3620 (L1 Terminal Fault): Mitigation: PTE Inversion notes_plat_sysinfo_430 = Microarchitectural Data Sampling: No status reported notes_plat_sysinfo_435 = CVE-2017-5754 (Meltdown): Mitigation: PTI notes_plat_sysinfo_440 = CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled notes_plat_sysinfo_445 = via prctl and seccomp notes_plat_sysinfo_450 = CVE-2017-5753 (Spectre variant 1): Mitigation: Load fences, __user pointer notes_plat_sysinfo_455 = sanitization notes_plat_sysinfo_460 = CVE-2017-5715 (Spectre variant 2): Mitigation: IBRS (kernel) notes_plat_sysinfo_465 = notes_plat_sysinfo_470 = run-level 3 Dec 10 08:26 notes_plat_sysinfo_475 = notes_plat_sysinfo_480 = SPEC is set to: /home/Benchmark/speccpu2017-1.1.0 notes_plat_sysinfo_485 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_490 = /dev/mapper/rhel-home xfs 392G 33G 359G 9% /home notes_plat_sysinfo_495 = notes_plat_sysinfo_500 = From /sys/devices/virtual/dmi/id notes_plat_sysinfo_505 = BIOS: FUJITSU // American Megatrends Inc. V5.0.0.13 R1.12.0 for D3673-A1x notes_plat_sysinfo_510 = 09/06/2019 notes_plat_sysinfo_515 = Vendor: FUJITSU notes_plat_sysinfo_520 = Product: PRIMERGY TX1330 M4 notes_plat_sysinfo_525 = Serial: YMJLXXXXXX notes_plat_sysinfo_530 = notes_plat_sysinfo_535 = Additional information from dmidecode follows. WARNING: Use caution when you interpret notes_plat_sysinfo_540 = this section. The 'dmidecode' program reads system data which is "intended to allow notes_plat_sysinfo_545 = hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_550 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_555 = Memory: notes_plat_sysinfo_560 = 4x SK Hynix HMA82GU7CJR8N-VK 16 GB 2 rank 2667, configured at 2400 notes_plat_sysinfo_565 = notes_plat_sysinfo_570 = (End of data from sysinfo program) hw_cpu_name = Intel Core i3-9100 hw_disk = 1 x SATA M.2 SSD, 480 GB hw_memory000 = 64 GB (4 x 16 GB 2Rx8 PC4-2666V-E, running at hw_memory001 = 2400) hw_nchips = 1 prepared_by = root (is never output, only tags rawfile) sw_file = xfs sw_os000 = Red Hat Enterprise Linux Server release 7.6 sw_os001 = (Maipo) sw_os002 = 3.10.0-957.el7.x86_64 sw_state = Run level 3 (multi-user) # End of settings added by sysinfo_program # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. 648.exchange2_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 631.deepsjeng_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 625.x264_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 623.xalancbmk_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 default: fw_bios000 = Fujitsu BIOS Version V5.0.0.13 R1.12.0 for D3673-A1x. fw_bios001 = Released Sep-2019 notes_plat_000 = BIOS configuration: notes_plat_005 = Adjacent Cache Line Prefetch = Disabled notes_plat_010 = C-State Pre-Wake = Disabled notes_plat_015 = DCU Streamer Prefetcher = Disabled notes_plat_020 = DDR PowerDown and idle counter = PCODE notes_plat_025 = Energy Efficient Turbo = Disabled notes_plat_030 = Enhanced C-states = Disabled notes_plat_035 = Intel Virtualization Technology = Disabled notes_plat_040 = Native ASPM = Disabled notes_plat_045 = Package C-State un-demotion = Enabled notes_plat_050 = REFRESH_2X_MODE = 1-Enabled for WARM or HOT