CPU2006 license: | 9046 | Test date: | Aug-2017 |
---|---|---|---|
Test sponsor: | Sugon | Hardware Availability: | Jul-2017 |
Tested by: | Sugon | Software Availability: | Apr-2017 |
Hardware | |
---|---|
CPU Name: | AMD EPYC 7601 |
CPU Characteristics: | AMD Turbo CORE technology up to 3.20 GHz |
CPU MHz: | 2200 |
FPU: | Integrated |
CPU(s) enabled: | 64 cores, 2 chips, 32 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 64 KB I + 32 KB D on chip per core |
Secondary Cache: | 512 KB I+D on chip per core |
L3 Cache: | 64 MB I+D on chip per chip, 8 MB shared / 4 cores |
Other Cache: | None |
Memory: | 512 GB (16 x 32 GB 2Rx4 PC4-2666V-R, running at 2400 MHz) |
Disk Subsystem: | 1 x 1.0 TB SATA, 7200 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Ubuntu 17.04, Kernel 4.10.0-24-generic |
Compiler: | C/C++: Version 4.5.2.1 of x86 Open64 Compiler Suite (from AMD) |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (Full multiuser with network) |
Base Pointers: | 32/64-bit |
Peak Pointers: | 32/64-bit |
Other Software: | MicroQuill SmartHeap 10.0 32-bit Library for Linux |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 128 | 633 | 1970 | 637 | 1960 | 640 | 1950 | 128 | 503 | 2480 | 505 | 2480 | 503 | 2490 |
401.bzip2 | 128 | 1002 | 1230 | 1003 | 1230 | 1006 | 1230 | 128 | 972 | 1270 | 970 | 1270 | 969 | 1270 |
403.gcc | 128 | 698 | 1480 | 701 | 1470 | 704 | 1460 | 128 | 611 | 1690 | 614 | 1680 | 612 | 1680 |
429.mcf | 128 | 763 | 1530 | 758 | 1540 | 759 | 1540 | 128 | 455 | 2570 | 455 | 2570 | 460 | 2540 |
445.gobmk | 128 | 734 | 1830 | 735 | 1830 | 736 | 1820 | 128 | 692 | 1940 | 690 | 1950 | 692 | 1940 |
456.hmmer | 128 | 351 | 3400 | 349 | 3420 | 349 | 3430 | 128 | 335 | 3560 | 335 | 3560 | 335 | 3560 |
458.sjeng | 128 | 909 | 1700 | 909 | 1700 | 908 | 1710 | 128 | 874 | 1770 | 871 | 1780 | 872 | 1780 |
462.libquantum | 128 | 123 | 21500 | 123 | 21600 | 123 | 21500 | 128 | 126 | 21000 | 126 | 21000 | 126 | 21000 |
464.h264ref | 128 | 1144 | 2480 | 1145 | 2470 | 1143 | 2480 | 128 | 953 | 2970 | 944 | 3000 | 944 | 3000 |
471.omnetpp | 128 | 745 | 1070 | 742 | 1080 | 742 | 1080 | 128 | 748 | 1070 | 746 | 1070 | 747 | 1070 |
473.astar | 128 | 707 | 1270 | 708 | 1270 | 705 | 1270 | 128 | 629 | 1430 | 629 | 1430 | 629 | 1430 |
483.xalancbmk | 128 | 393 | 2240 | 394 | 2240 | 392 | 2250 | 128 | 391 | 2260 | 393 | 2250 | 395 | 2240 |
The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. See the configuration file for details.
'ulimit -s unlimited' was used to set environment stack size 'ulimit -l 2097152' was used to set environment locked pages in memory limit runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc> Set dirty_ratio=8 to limit dirty cache to 8% of memory Set swappiness=1 to swap only if necessary Set zone_reclaim_mode=1 to free local node memory and avoid remote memory sync then drop_caches=3 to reset caches before invoking runspec Transparent huge pages were enabled for this run (OS default) vm.nr_hugepages=114688 in /etc/sysctl.conf mount -t hugetlbfs nodev /mnt/hugepages
The Linux run level was 3; sysinfo run-level is incorrect. Set "SMT Mode" in the BIOS as "Auto".
Environment variables set by runspec before the start of the run: HUGETLB_LIMIT = "896" LD_LIBRARY_PATH = "/home/tianywan/benchmarks/cpu2006/amd1603-rate-libs-revA/32:/home/tianywan/benchmarks/cpu2006/amd1603-rate-libs-revA/64" The binaries were built with the x86 Open64 Compiler Suite, which is only available from (and supported by) AMD at http://developer.amd.com/tools-and-sdks/cpu-development/x86-open64-compiler-suite/ Binaries were compiled on a system with 2x AMD Opteron 6378 chips + 128GB Memory using RHEL 6.3
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
403.gcc: | -DSPEC_CPU_LP64 |
429.mcf: | -DSPEC_CPU_LP64 |
445.gobmk: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX |
464.h264ref: | -DSPEC_CPU_LP64 |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-Ofast -CG:local_sched_alg=1 -INLINE:aggressive=ON -IPA:plimit=8000 -IPA:small_pu=100 -HP:bd=2m:heap=2m -mso -LNO:prefetch=2 -march=bdver1 -mno-fma4 -mno-xop -mno-tbm |
-Ofast -m32 -INLINE:aggressive=on -CG:cmp_peep=on -D__OPEN64_FAST_SET -march=bdver1 -mno-fma4 -mno-xop -mno-tbm -L/root/work/libraries/SmartHeap-10/lib -lsmartheap |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
445.gobmk: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX |
464.h264ref: | -DSPEC_CPU_LP64 |
473.astar: | -DSPEC_CPU_LP64 |
483.xalancbmk: | -DSPEC_CPU_LINUX |