CPU2006 license: | 49 | Test date: | May-2017 |
---|---|---|---|
Test sponsor: | Advanced Micro Devices | Hardware Availability: | Jun-2017 |
Tested by: | Advanced Micro Devices | Software Availability: | Apr-2016 |
Hardware | |
---|---|
CPU Name: | AMD EPYC 7601 |
CPU Characteristics: | AMD Turbo CORE technology up to 3.20 GHz |
CPU MHz: | 2200 |
FPU: | Integrated |
CPU(s) enabled: | 64 cores, 2 chips, 32 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 64 KB I + 32 KB D on chip per core |
Secondary Cache: | 512 KB I+D on chip per core |
L3 Cache: | 64 MB I+D on chip per chip, 8 MB shared / 4 cores |
Other Cache: | None |
Memory: | 512 GB (16 x 32 GB 2Rx4 PC4-2667V-R, running at 2400) |
Disk Subsystem: | 1 x 500 GB SSD |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Ubuntu 16.04 LTS, Kernel 4.4.0-71.generic |
Compiler: | C/C++/Fortran: Version 4.5.2.1 of x86 Open64 Compiler Suite (from AMD) |
Auto Parallel: | No |
File System: | ext3 |
System State: | Run level 3 (Full multiuser with network) |
Base Pointers: | 64-bit |
Peak Pointers: | 32/64-bit |
Other Software: | None |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
410.bwaves | 128 | 1432 | 1210 | 1435 | 1210 | 1435 | 1210 | 128 | 1406 | 1240 | 1405 | 1240 | 1406 | 1240 |
416.gamess | 128 | 1212 | 2070 | 1213 | 2070 | 1211 | 2070 | 128 | 1079 | 2320 | 1091 | 2300 | 1081 | 2320 |
433.milc | 128 | 1177 | 998 | 1177 | 998 | 1178 | 998 | 128 | 982 | 1200 | 982 | 1200 | 983 | 1200 |
434.zeusmp | 128 | 527 | 2210 | 528 | 2210 | 529 | 2200 | 128 | 523 | 2230 | 525 | 2220 | 522 | 2230 |
435.gromacs | 128 | 447 | 2040 | 454 | 2010 | 453 | 2020 | 128 | 332 | 2750 | 333 | 2750 | 333 | 2740 |
436.cactusADM | 128 | 639 | 2390 | 645 | 2370 | 640 | 2390 | 128 | 631 | 2420 | 630 | 2430 | 634 | 2410 |
437.leslie3d | 128 | 1360 | 885 | 1361 | 884 | 1361 | 884 | 128 | 1065 | 1130 | 1065 | 1130 | 1065 | 1130 |
444.namd | 128 | 557 | 1840 | 557 | 1840 | 559 | 1840 | 128 | 471 | 2180 | 473 | 2170 | 471 | 2180 |
447.dealII | 128 | 422 | 3470 | 421 | 3480 | 421 | 3480 | 128 | 384 | 3810 | 380 | 3850 | 394 | 3720 |
450.soplex | 128 | 1130 | 944 | 1129 | 945 | 1130 | 944 | 128 | 1052 | 1010 | 1051 | 1020 | 1050 | 1020 |
453.povray | 128 | 264 | 2580 | 265 | 2570 | 266 | 2560 | 128 | 212 | 3210 | 211 | 3220 | 210 | 3240 |
454.calculix | 128 | 389 | 2720 | 376 | 2810 | 377 | 2800 | 128 | 389 | 2720 | 376 | 2810 | 377 | 2800 |
459.GemsFDTD | 128 | 1713 | 793 | 1714 | 792 | 1713 | 793 | 128 | 1581 | 859 | 1586 | 856 | 1586 | 856 |
465.tonto | 128 | 658 | 1920 | 653 | 1930 | 658 | 1910 | 128 | 599 | 2100 | 601 | 2100 | 598 | 2100 |
470.lbm | 128 | 987 | 1780 | 975 | 1800 | 978 | 1800 | 128 | 975 | 1800 | 975 | 1800 | 985 | 1790 |
481.wrf | 128 | 933 | 1530 | 932 | 1530 | 932 | 1530 | 128 | 932 | 1530 | 931 | 1540 | 932 | 1530 |
482.sphinx3 | 128 | 1939 | 1290 | 1941 | 1290 | 1949 | 1280 | 128 | 1743 | 1430 | 1746 | 1430 | 1743 | 1430 |
The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. See the configuration file for details.
'ulimit -s unlimited' was used to set environment stack size 'ulimit -l 2097152' was used to set environment locked pages in memory limit runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc> Set dirty_ratio=8 to limit dirty cache to 8% of memory Set swappiness=1 to swap only if necessary Set zone_reclaim_mode=1 to free local node memory and avoid remote memory sync then drop_caches=3 to reset caches before invoking runspec Transparent huge pages were enabled for this run (OS default)
The Linux run level was 3; sysinfo run-level is incorrect. The dmidecode memory speed information is incorrect.
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/root/work/cpu2006/amd1603-rate-libs-revA/32:/root/work/cpu2006/amd1603-rate-libs-revA/64" The binaries were built with the AMD supported x86 Open64 Compiler Suite, which is only available from AMD at http://developer.amd.com/tools-and-sdks/cpu-development/x86-open64-compiler-suite/ Binaries were compiled on a system with 2x AMD Opteron 6378 chips + 128GB Memory using RHEL 6.3 Submitted_by: "Smith, Van" <[email protected]> Submitted: Mon Jun 5 12:36:13 EDT 2017 Submission: cpu2006-20170529-47126.sub Submitted_by: "Smith, Van" <[email protected]> Submitted: Thu Jun 8 15:42:49 EDT 2017 Submission: cpu2006-20170529-47126.sub
opencc |
openCC |
openf95 |
opencc openf95 |
410.bwaves: | -DSPEC_CPU_LP64 |
416.gamess: | -DSPEC_CPU_LP64 |
433.milc: | -DSPEC_CPU_LP64 |
434.zeusmp: | -DSPEC_CPU_LP64 |
435.gromacs: | -DSPEC_CPU_LP64 |
436.cactusADM: | -DSPEC_CPU_LP64 -fno-second-underscore |
437.leslie3d: | -DSPEC_CPU_LP64 |
444.namd: | -DSPEC_CPU_LP64 |
447.dealII: | -DSPEC_CPU_LP64 |
450.soplex: | -DSPEC_CPU_LP64 |
453.povray: | -DSPEC_CPU_LP64 |
454.calculix: | -DSPEC_CPU_LP64 |
459.GemsFDTD: | -DSPEC_CPU_LP64 |
465.tonto: | -DSPEC_CPU_LP64 |
470.lbm: | -DSPEC_CPU_LP64 |
481.wrf: | -DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LP64 -fno-second-underscore |
482.sphinx3: | -DSPEC_CPU_LP64 |
-Ofast -OPT:malloc_alg=1 -HP:bd=2m:heap=2m -IPA:plimit=8000 -IPA:small_pu=100 -mso -march=bdver1 -mno-fma4 -mno-xop -mno-tbm -WB, -Wl, -z,muldefs |
-Ofast -static -CG:load_exe=0 -OPT:malloc_alg=1 -INLINE:aggressive=on -HP:bd=2m:heap=2m -D__OPEN64_FAST_SET -march=bdver2 -mno-fma4 -mno-xop -mno-tbm -WB, -Wl, -z,muldefs |
-Ofast -LNO:blocking=off -LNO:simd_peel_align=on -OPT:rsqrt=2 -OPT:unroll_size=256 -HP:bd=2m:heap=2m -mso -march=bdver1 -mno-fma4 -mno-xop -mno-tbm -WB, -Wl, -z,muldefs |
opencc |
openCC |
openf95 |
opencc openf95 |
410.bwaves: | -DSPEC_CPU_LP64 |
416.gamess: | -DSPEC_CPU_LP64 |
433.milc: | -DSPEC_CPU_LP64 |
434.zeusmp: | -DSPEC_CPU_LP64 |
435.gromacs: | -DSPEC_CPU_LP64 |
436.cactusADM: | -DSPEC_CPU_LP64 -fno-second-underscore |
437.leslie3d: | -DSPEC_CPU_LP64 |
444.namd: | -DSPEC_CPU_LP64 |
453.povray: | -DSPEC_CPU_LP64 |
454.calculix: | -DSPEC_CPU_LP64 |
459.GemsFDTD: | -DSPEC_CPU_LP64 |
465.tonto: | -DSPEC_CPU_LP64 |
470.lbm: | -DSPEC_CPU_LP64 |
481.wrf: | -DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LP64 -fno-second-underscore |
435.gromacs: | -Ofast -OPT:rsqrt=2 -HP:bdt=2m:heap=2m -CG:local_sched_alg=2 -CG:load_exe=3 -GRA:unspill=on -march=bdver2 -mno-fma4 -LNO:simd=3 |
436.cactusADM: | -fb_create fbdata(pass 1) -fb_opt fbdata(pass 2) -Ofast -LNO:blocking=off -LNO:prefetch=2 -LNO:pf2=0 -LNO:prefetch_ahead=4 -HP -CG:locs_shallow_depth=1 -CG:load_exe=0 -CG:dsched=on -WOPT:sib=on -march=bdver2 -mno-fma4 |
454.calculix: | basepeak = yes |
481.wrf: | -Ofast -LNO:blocking=off -LANG:copyinout=off -IPA:callee_limit=5000 -GRA:prioritize_by_density=on -HP -WOPT:sib=on -march=bdver1 -mno-fma4 |