CPU2006 license: | 19 | Test date: | Mar-2015 |
---|---|---|---|
Test sponsor: | Fujitsu | Hardware Availability: | Mar-2015 |
Tested by: | Fujitsu | Software Availability: | Nov-2013 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E5-2640 v3 |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.40 GHz |
CPU MHz: | 2600 |
FPU: | Integrated |
CPU(s) enabled: | 16 cores, 2 chips, 8 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chip |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 20 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 256 GB (16 x 16 GB 2Rx4 PC4-2133P-R, running at 1866 MHz) |
Disk Subsystem: | 1 x SATA, 500 GB, 7200 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 6.6 (Santiago) 2.6.32-504.el6.x86_64 |
Compiler: | C/C++: Version 14.0.0.080 of Intel C++ Studio XE for Linux |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V10.0 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 32 | 585 | 534 | 585 | 534 | 584 | 535 | 32 | 475 | 658 | 480 | 652 | 476 | 657 |
401.bzip2 | 32 | 893 | 346 | 895 | 345 | 893 | 346 | 32 | 855 | 361 | 855 | 361 | 854 | 362 |
403.gcc | 32 | 485 | 531 | 481 | 536 | 483 | 534 | 32 | 482 | 535 | 481 | 536 | 483 | 534 |
429.mcf | 32 | 303 | 964 | 303 | 962 | 302 | 965 | 32 | 303 | 964 | 303 | 962 | 302 | 965 |
445.gobmk | 32 | 722 | 465 | 722 | 465 | 722 | 465 | 32 | 702 | 478 | 702 | 478 | 703 | 477 |
456.hmmer | 32 | 296 | 1010 | 293 | 1020 | 297 | 1010 | 32 | 291 | 1030 | 293 | 1020 | 291 | 1020 |
458.sjeng | 32 | 782 | 495 | 782 | 495 | 782 | 495 | 32 | 757 | 511 | 755 | 513 | 757 | 512 |
462.libquantum | 32 | 93.0 | 7130 | 93.0 | 7130 | 92.9 | 7140 | 32 | 93.0 | 7130 | 93.0 | 7130 | 92.9 | 7140 |
464.h264ref | 32 | 855 | 828 | 875 | 809 | 879 | 806 | 32 | 847 | 836 | 828 | 855 | 834 | 849 |
471.omnetpp | 32 | 513 | 390 | 517 | 387 | 512 | 391 | 32 | 488 | 410 | 490 | 408 | 493 | 406 |
473.astar | 32 | 580 | 387 | 580 | 387 | 579 | 388 | 32 | 580 | 387 | 580 | 387 | 579 | 388 |
483.xalancbmk | 32 | 285 | 775 | 285 | 774 | 285 | 775 | 32 | 285 | 775 | 285 | 774 | 285 | 775 |
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited"
BIOS configuration: Energy Performance = Performance Utilization Profile = Unbalanced QPI snoop mode: Early Snoop COD Enable = Disabled, Early Snoop = Enabled CPU C1E Support = Disabled
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/home/SPECcpu2006/libs/32:/home/SPECcpu2006/libs/64:/home/SPECcpu2006/sh" Binaries compiled on a system with 1x Core i7-860 CPU + 8GB memory using RedHat EL 6.4 Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled Filesystem page cache cleared with: echo 1> /proc/sys/vm/drop_caches runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc> For information about Fujitsu please visit: http://www.fujitsu.com
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/sh -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
400.perlbench: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -auto-ilp32 |
401.bzip2: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -opt-prefetch -auto-ilp32 -ansi-alias |
403.gcc: | -xCORE-AVX2 -ipo -O3 -no-prec-div |
429.mcf: | basepeak = yes |
445.gobmk: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -prof-use(pass 2) -ansi-alias -opt-mem-layout-trans=3 |
456.hmmer: | -xCORE-AVX2 -ipo -O3 -no-prec-div -unroll2 -auto-ilp32 |
458.sjeng: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -auto-ilp32 |
462.libquantum: | basepeak = yes |
464.h264ref: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll2 -ansi-alias |
471.omnetpp: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/sh -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |