CPU2006 license: | 3 | Test date: | Dec-2012 |
---|---|---|---|
Test sponsor: | Hewlett-Packard Company | Hardware Availability: | Nov-2012 |
Tested by: | Hewlett-Packard Company | Software Availability: | Aug-2012 |
Hardware | |
---|---|
CPU Name: | AMD Opteron 6378 |
CPU Characteristics: | AMD Turbo CORE technology up to 3.30 GHz |
CPU MHz: | 2400 |
FPU: | Integrated |
CPU(s) enabled: | 32 cores, 2 chips, 16 cores/chip |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 512 KB I on chip per chip, 64 KB I shared / 2 cores; 16 KB D on chip per core |
Secondary Cache: | 16 MB I+D on chip per chip, 2 MB shared / 2 cores |
L3 Cache: | 16 MB I+D on chip per chip, 8 MB shared / 8 cores |
Other Cache: | None |
Memory: | 128 GB (16 x 8 GB 2Rx4 PC3-12800R-11, ECC) |
Disk Subsystem: | 2 x 200 GB SSD SAS, RAID 1 |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 6.3, Kernel 2.6.32-279.el6.x86_64 |
Compiler: | C/C++/Fortran: Version 4.5.2 of x86 Open64 Compiler Suite (from AMD) |
Auto Parallel: | No |
File System: | ext3 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 64-bit |
Peak Pointers: | 32/64-bit |
Other Software: | None |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
410.bwaves | 32 | 1357 | 321 | 1356 | 321 | 1355 | 321 | 32 | 1332 | 326 | 1333 | 326 | 1332 | 327 |
416.gamess | 32 | 1884 | 332 | 1907 | 328 | 1893 | 331 | 32 | 1728 | 363 | 1732 | 362 | 1729 | 362 |
433.milc | 32 | 1089 | 270 | 1090 | 270 | 1089 | 270 | 32 | 930 | 316 | 930 | 316 | 930 | 316 |
434.zeusmp | 32 | 680 | 429 | 678 | 430 | 689 | 423 | 32 | 656 | 444 | 657 | 443 | 661 | 441 |
435.gromacs | 32 | 569 | 402 | 570 | 401 | 569 | 401 | 32 | 457 | 500 | 456 | 501 | 458 | 499 |
436.cactusADM | 32 | 741 | 516 | 742 | 515 | 742 | 515 | 32 | 674 | 567 | 677 | 565 | 678 | 564 |
437.leslie3d | 32 | 1352 | 222 | 1352 | 222 | 1355 | 222 | 32 | 1048 | 287 | 1046 | 287 | 1050 | 286 |
444.namd | 32 | 788 | 326 | 789 | 325 | 782 | 328 | 32 | 668 | 384 | 665 | 386 | 665 | 386 |
447.dealII | 32 | 508 | 720 | 511 | 717 | 510 | 718 | 32 | 456 | 802 | 465 | 787 | 472 | 775 |
450.soplex | 32 | 994 | 268 | 995 | 268 | 994 | 268 | 32 | 912 | 293 | 912 | 293 | 911 | 293 |
453.povray | 32 | 385 | 442 | 385 | 442 | 391 | 435 | 32 | 335 | 508 | 336 | 507 | 335 | 509 |
454.calculix | 32 | 411 | 643 | 411 | 642 | 410 | 643 | 32 | 392 | 673 | 393 | 672 | 395 | 669 |
459.GemsFDTD | 32 | 1655 | 205 | 1654 | 205 | 1654 | 205 | 32 | 1448 | 234 | 1449 | 234 | 1448 | 234 |
465.tonto | 32 | 808 | 390 | 808 | 390 | 807 | 390 | 32 | 735 | 428 | 739 | 426 | 739 | 426 |
470.lbm | 32 | 1006 | 437 | 1007 | 437 | 1007 | 437 | 32 | 1004 | 438 | 1004 | 438 | 1005 | 437 |
481.wrf | 32 | 906 | 394 | 908 | 394 | 916 | 390 | 32 | 906 | 394 | 905 | 395 | 907 | 394 |
482.sphinx3 | 32 | 1817 | 343 | 1821 | 342 | 1818 | 343 | 32 | 1402 | 445 | 1445 | 432 | 1445 | 431 |
The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. See the configuration file for details.
'ulimit -s unlimited' was used to set environment stack size 'ulimit -l 2097152' was used to set environment locked pages in memory limit Set transparent_hugepage=never as a boot parameter in /boot/grub/menu.lst Set vm/nr_hugepages=28672 in /etc/sysctl.conf mount -t hugetlbfs nodev /mnt/hugepages
BIOS configuration: HP Power Profile set to Maximum Performace Thermal Configuration set to Maximum Cooling Collaborative Power Control set to Disable Minimum Processor Idle Power C1e State to Enabled Processor Power and Utilization Monitoring set to Disable
Environment variables set by runspec before the start of the run: HUGETLB_LIMIT = "896" LD_LIBRARY_PATH = "/cpu2006/amd1206-rate-libs-revA/32:/cpu2006/amd1206-rate-libs-revA/64" The x86 Open64 Compiler Suite is only available from (and supported by) AMD at http://developer.amd.com/cpu/open64 Binaries were compiled on a system with 2x AMD Opteron 6386SE chips + 128GB Memory using RHEL 6.3
opencc |
openCC |
openf95 |
opencc openf95 |
410.bwaves: | -DSPEC_CPU_LP64 |
416.gamess: | -DSPEC_CPU_LP64 |
433.milc: | -DSPEC_CPU_LP64 |
434.zeusmp: | -DSPEC_CPU_LP64 |
435.gromacs: | -DSPEC_CPU_LP64 |
436.cactusADM: | -DSPEC_CPU_LP64 -fno-second-underscore |
437.leslie3d: | -DSPEC_CPU_LP64 |
444.namd: | -DSPEC_CPU_LP64 |
447.dealII: | -DSPEC_CPU_LP64 |
450.soplex: | -DSPEC_CPU_LP64 |
453.povray: | -DSPEC_CPU_LP64 |
454.calculix: | -DSPEC_CPU_LP64 |
459.GemsFDTD: | -DSPEC_CPU_LP64 |
465.tonto: | -DSPEC_CPU_LP64 |
470.lbm: | -DSPEC_CPU_LP64 |
481.wrf: | -DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LP64 -fno-second-underscore |
482.sphinx3: | -DSPEC_CPU_LP64 |
-Ofast -OPT:malloc_alg=1 -HP:bd=2m:heap=2m -IPA:plimit=8000 -IPA:small_pu=100 -mso -march=bdver1 |
-Ofast -static -CG:load_exe=0 -OPT:malloc_alg=1 -INLINE:aggressive=on -HP:bd=2m:heap=2m -D__OPEN64_FAST_SET -march=bdver1 |
-Ofast -LNO:blocking=off -LNO:simd_peel_align=on -OPT:rsqrt=2 -OPT:unroll_size=256 -HP:bd=2m:heap=2m -mso -march=bdver1 |
-Ofast -OPT:malloc_alg=1 -HP:bd=2m:heap=2m -IPA:plimit=8000 -IPA:small_pu=100 -mso -march=bdver1 -LNO:blocking=off -LNO:simd_peel_align=on -OPT:rsqrt=2 -OPT:unroll_size=256 |
opencc |
openCC |
openf95 |
opencc openf95 |
410.bwaves: | -DSPEC_CPU_LP64 |
416.gamess: | -DSPEC_CPU_LP64 |
433.milc: | -DSPEC_CPU_LP64 |
434.zeusmp: | -DSPEC_CPU_LP64 |
435.gromacs: | -DSPEC_CPU_LP64 |
436.cactusADM: | -DSPEC_CPU_LP64 -fno-second-underscore |
437.leslie3d: | -DSPEC_CPU_LP64 |
444.namd: | -DSPEC_CPU_LP64 |
453.povray: | -DSPEC_CPU_LP64 |
454.calculix: | -DSPEC_CPU_LP64 |
459.GemsFDTD: | -DSPEC_CPU_LP64 |
465.tonto: | -DSPEC_CPU_LP64 |
470.lbm: | -DSPEC_CPU_LP64 |
481.wrf: | -DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LP64 -fno-second-underscore |