# Invocation command line:
# /work/cpu2006/bin/runspec --rate 8 -c Crate.cfg --define smt --define cores=8 --define physicalfirst --define no-numa -n 3 -i ref -T all -o all int
# output_root was not used for this run
############################################################################
############################################################################
# This is a sample config file. It was tested with:
#
#      Compiler name/version:       Intel Compiler 12.1
#      Operating system version:    64-Bit RedHat Enterprise Linux64 6.2
#      Hardware:                    Intel processors supporting AVX
#                                   (SSE4.2 for int)
#
############################################################################
# SPEC CPU2006 Intel Linux64 config file
# Aug 2011 IC 12.1 RC1 Linux64
############################################################################
action      = validate
tune        = base,peak
%define version 15mar2012
ext         = cpu2006.1.2.ic12.1.linux64.rate.%{version}
# fail_build  = 1
PATHSEP     = /
check_md5=1
reportable=1
bench_post_setup=sync
parallel_test=0
mean_anyway=1
sysinfo_program = specperl $[top]/config/sysinfo.rev6800 -f -p

flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic12.1-official-linux64.20111122.xml

# Set some environment variables
preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64

#
# These are listed as benchmark-tuning-extension-machine
#
int=default=default=default:
CC=  icc  -m32
CXX= icpc -m32
OBJ = .o
SMARTHEAP32_DIR = /opt/SmartHeap/lib
SMARTHEAP64_DIR = /opt/SmartHeap/lib64

fp=default=default=default:
CC=  icc   -m64
CXX= icpc  -m64
FC=  ifort -m64
OBJ = .o

# For UP systems, we need to know if the processors are ordered across cores first or in order
# If across cores, processors 0, 1, 2 and 3 are on distinct physical cores
# Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores

default:
submit       = numactl --localalloc --physcpubind=$SPECCOPYNUM $command

%ifdef %{no-numa}
submit       = taskset -c $SPECCOPYNUM $command
%endif

####################################################################
# Compiler options
# for Nehalem use -xSSE4.2
# for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3
####################################################################
int=default=default=default:
SSE          = -xSSE4.2
FASTNOSTATIC =  $(SSE) -ipo -O3 -no-prec-div
FAST =  $(SSE) -ipo -O3 -no-prec-div -static

fp=default=default=default:
SSE          = -xAVX
FASTNOSTATIC =  $(SSE) -ipo -O3 -no-prec-div
FAST =  $(SSE) -ipo -O3 -no-prec-div -static

################################################################
#
# portability & libraries
#
#################### Portability Flags and Notes ############################

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

fp=default:
PORTABILITY = -DSPEC_CPU_LP64

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX


################################################################
# Tuning Flags
################################################################
#
# Base tuning default optimization
# Feedback directed optimization not allowed in baseline for CPU2006
# However there is no limit on the number of flags as long as the same
# flags are used in the same order for all benchmarks of a given language

471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP32_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    $(FASTNOSTATIC)  -opt-prefetch -opt-mem-layout-trans=3
CXXOPTIMIZE=  $(FASTNOSTATIC)  -opt-prefetch -opt-mem-layout-trans=3

fp=base=default=default:
OPTIMIZE=     $(FAST) -opt-prefetch
COPTIMIZE=    -auto-p32 -ansi-alias -opt-mem-layout-trans=3
CXXOPTIMIZE=  -auto-p32 -ansi-alias -opt-mem-layout-trans=3

################################################################
# Peak Tuning Flags int 2006 fast
################################################################
int=peak=default:
COPTIMIZE=         -ansi-alias -opt-mem-layout-trans=3
CXXOPTIMIZE=       -ansi-alias -opt-mem-layout-trans=3
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS   = -prof-gen
PASS2_CXXFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCXXFLAGS = -prof-gen
PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use

400.perlbench=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64
COPTIMIZE= -auto-ilp32

401.bzip2=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -opt-prefetch  -auto-ilp32 -ansi-alias

403.gcc=peak=default:
COPTIMIZE = $(FASTNOSTATIC)
feedback=0

429.mcf=peak=default:
basepeak=yes

445.gobmk=peak=default:
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(SSE) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(SSE) -prof-use

456.hmmer=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE=  $(FASTNOSTATIC) -unroll2  -auto-ilp32
feedback=no

458.sjeng=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -unroll4 -auto-ilp32

462.libquantum=peak=default:
CC= icc -m32
CPORTABILITY= -DSPEC_CPU_LINUX
COPTIMIZE= -xAVX -ipo -O3 -no-prec-div  -opt-prefetch -opt-mem-layout-trans=3
feedback=no

464.h264ref=peak=default:
COPTIMIZE=  -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE=  -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
CCX= icpc -m32
CXXOPTIMIZE= -xAVX -ipo -O3 -no-prec-div  -opt-prefetch -opt-mem-layout-trans=3
feedback=no

483.xalancbmk=peak=default:
CCX= icpc -m32
CXXOPTIMIZE= -xAVX -ipo -O3 -no-prec-div  -opt-prefetch -opt-mem-layout-trans=3
feedback=no

################################################################
# Peak Tuning Flags for FP
################################################################
fp=peak=default:
COPTIMIZE=       -auto-ilp32 -opt-mem-layout-trans=3
CXXOPTIMIZE=     -auto-ilp32 -opt-mem-layout-trans=3
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   $(FASTNOSTATIC)  -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = $(FASTNOSTATIC)  -prof-use
PASS1_FFLAGS =   -prof-gen
PASS2_FFLAGS =   $(FASTNOSTATIC)                         -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  $(FASTNOSTATIC)                         -prof-use

410.bwaves=peak=default:
OPTIMIZE= -static
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

416.gamess=peak=default:
OPTIMIZE= -unroll2 -inline-level=0  -scalar-rep- -static

433.milc=peak=default:
OPTIMIZE= -static

434.zeusmp=peak=default:
basepeak=yes
feedback=0

435.gromacs=peak=default:
OPTIMIZE= -xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -static
COPTIMIZE= -auto-p32  -ansi-alias -opt-mem-layout-trans=3
feedback=0

436.cactusADM=peak=default:
basepeak=yes

437.leslie3d=peak=default:
OPTIMIZE=     $(FAST) -opt-prefetch
feedback=no
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

444.namd=peak=default:
CXXOPTIMIZE= -fno-alias -auto-ilp32

447.dealII=peak=default:
basepeak=yes

450.soplex=peak=default:
PORTABILITY =
CXX= icpc -m32
OPTIMIZE= -opt-malloc-options=3
CXXOPTIMIZE=
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

453.povray=peak=default:
CXXOPTIMIZE= -unroll4  -ansi-alias

454.calculix=peak=default:
OPTIMIZE=     $(FAST)
feedback=0

459.GemsFDTD=peak=default:
PORTABILITY =
CXX= icpc -m32
OPTIMIZE= -opt-malloc-options=3
CXXOPTIMIZE=
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

465.tonto=peak=default:
OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3

470.lbm=peak=default:
basepeak=yes

481.wrf=peak=default:
OPTIMIZE=     $(FAST)
feedback=0

482.sphinx3=peak=default:
PORTABILITY=
CC= icc -m32
OPTIMIZE= -xSSE4.2 -ipo -O3 -no-prec-div -opt-mem-layout-trans=3
COPTIMIZE= -unroll2
feedback=no


#include: SUT.conf
#  ----- Begin inclusion of 'SUT.conf'
############################################################################
default=default=default=default:
license_num      = 19
test_sponsor     = Fujitsu
hw_avail         = May-2012
tester           = Fujitsu
########################################
hw_cpu_name      = Intel Xeon E3-1280 v2
hw_cpu_char      = Intel Turbo Boost Technology up to 4.00 GHz
hw_cpu_mhz       = 3600
hw_model         = CELSIUS W520 (Intel Xeon E3-1280 v2)
hw_ncpuorder     = 1 chip
hw_ncores        = 4
hw_nchips        = 1
hw_ncoresperchip = 4
hw_nthreadspercore = 2
# notes_plat_020     = Hyper-Threading Technology = Disabled
# Einziges BIOS setting?
hw_tcache        = 8 MB I+D on chip per chip
hw_memory        = 16 GB (2 x 8 GB 2Rx8 PC3-12800E-11, ECC)
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 256 KB I+D on chip per core
hw_ocache        = None
hw_disk          = 1 x SATA III, 500 GB, 7200 rpm
hw_fpu           = Integrated
hw_other         = None
hw_vendor        = Fujitsu
########################################
prepared_by      = Fujitsu
sw_file          = ReiserFS
sw_os000         = Red Hat Enterprise Linux Server release 6.2,
sw_os001 = 2.6.32-220.el6.x86_64
sw_state = Run level 3 (multi - user)
########################################
# notes_plat_010     = BIOS settings:
# 020 reserviert fuer Ht (s.o.)
# notes_plat_030     = Frequency Floor Override = Enabled
%ifdef %{no-numa}
notes_submit_000 = The config file option 'submit' was used to generate taskset commands
notes_submit_005 = to bind each copy to a specific processor.
notes_submit_010 = For details, please see the config file.
%else
notes_submit_020   = 'numactl' was used to bind copies to the cores.
notes_submit_030   = See the configuration file for details.
notes_submit_040   = For full details on using numactl, please refer to your Linux documentation, 'man numactl'
%endif
# ---- End inclusion of '/work/cpu2006/config/SUT.conf'

notes_015  = Binaries were compiled on a system with
notes_020  = 2 x E5-2650 CPU + 96 GB memory using RHEL 6.2.
notes_025  =

notes_os_000     = Stack size set to unlimited using "ulimit -s unlimited"

sw_avail         = Dec-2011

int=default=default=default:
sw_compiler000   = C/C++: Version 12.1.3.293 of Intel C++ Studio XE
sw_compiler001   = for Linux
sw_base_ptrsize  = 32-bit
sw_peak_ptrsize  = 32/64-bit
sw_other         = Microquill SmartHeap 10 (Multi-Core)

fp=default=default=default:
sw_compiler001   = C/C++: Version 12.1.3.293 of Intel C++ Studio XE
sw_compiler002   = for Linux;
sw_compiler004   = Fortran: Version 12.1.3.293 of Intel Fortran
sw_compiler005   = Studio XE for Linux
sw_base_ptrsize  = 32/64-bit
sw_peak_ptrsize  = 32/64-bit
sw_other         = None

default:
%ifdef %{THP_enabled}
notes_200        = Transparent Huge Pages enabled with:
notes_201        = echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled
%endif

%ifdef %{THP_disabled}
notes_200        = Transparent Huge Pages disabled with:
notes_201        = echo never  > /sys/kernel/mm/redhat_transparent_hugepage/enabled
%endif

%ifdef %{drop_caches}
notes_202        = Filesystem page cache cleared with:
notes_203        = echo 1>       /proc/sys/vm/drop_caches
%endif

%ifdef %{invoke_with_interleave}
notes_204        = runspec command invoked through numactl i.e.:
notes_205        = numactl --interleave=all runspec <etc>
%endif


# The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6800 -f -p'
default:
# Sysinfo program /work/cpu2006/config/sysinfo.rev6800
# $Rev: 6800 $ $Date:: 2011-10-11 #$ 6f2ebdff5032aaa42e583f96b07f99d3
# running on rhiannon Fri May 11 22:26:09 2012
#
# This section contains SUT (System Under Test) info as seen by
# some common utilities.  To remove or add to this section, see:
#   http://www.spec.org/cpu2006/Docs/config.html#sysinfo
#
# From /proc/cpuinfo
#    model name : Intel(R) Xeon(R) CPU E3-1280 V2 @ 3.60GHz
#       1 "physical id"s (chips)
#       8 "processors"
#    cores, siblings (Caution: counting these is hw and system dependent.  The
#    following excerpts from /proc/cpuinfo might not be reliable.  Use with
#    caution.)
#       cpu cores : 4
#       siblings  : 8
#       physical 0: cores 0 1 2 3
#    cache size : 8192 KB
#
# From /proc/meminfo
#    MemTotal:       16262296 kB
#    HugePages_Total:       0
#    Hugepagesize:       2048 kB
#
# /usr/bin/lsb_release -d
#    Red Hat Enterprise Linux Server release 6.2 (Santiago)
#
# From /etc/*release* /etc/*version*
#    redhat-release: Red Hat Enterprise Linux Server release 6.2 (Santiago)
#    system-release: Red Hat Enterprise Linux Server release 6.2 (Santiago)
#    system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server
#
# uname -a:
#    Linux rhiannon 2.6.32-220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011
#    x86_64 x86_64 x86_64 GNU/Linux
#
# run-level 3 May 11 15:42
#
# SPEC is set to: /work/cpu2006
#    Filesystem    Type    Size  Used Avail Use% Mounted on
#    /dev/sda2     ext4    193G   50G  133G  28% /work
#
# Additional information from dmidecode:
#   Memory:
#    2x Samsung M391B1G73BH0-CK0 8 GB 1600 MHz 2 rank
#
# (End of data from sysinfo program)
# hw_cpu_name    = Intel Xeon E3-1280 V2
# hw_disk        = 193 GB  add more disk info here
# hw_memory001   = 15.509 GB fixme: If using DDR3, format is:
# hw_memory002   = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)'
# hw_nchips      = 1
# prepared_by    = root  (is never output, only tags rawfile)
# sw_file        = ext4
# sw_os001       = Red Hat Enterprise Linux Server release 6.2 (Santiago)
# sw_os002       = 2.6.32-220.el6.x86_64
# sw_state       = Run level 3 (add definition here)


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl001 = http://www.spec.org/cpu2006/flags/Fujitsu-Platform.20120313.xml
notes_000 =Environment variables set by runspec before the start of the run:
notes_005 =LD_LIBRARY_PATH = "/work/cpu2006/libs/32:/work/cpu2006/libs/64"
notes_010 =