CPU2006 license: | 9001 | Test date: | Dec-2011 |
---|---|---|---|
Test sponsor: | Itautec | Hardware Availability: | Jul-2011 |
Tested by: | Itautec | Software Availability: | Dec-2011 |
Hardware | |
---|---|
CPU Name: | Intel Xeon X5690 |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.73 GHz |
CPU MHz: | 3467 |
FPU: | Integrated |
CPU(s) enabled: | 12 cores, 2 chips, 6 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 12 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 48 GB (12 x 4 GB 2Rx4 PC3-10600R-9, ECC) |
Disk Subsystem: | 146 GB, SAS, 15000 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 6.2 2.6.32-220.el6.x86_64 |
Compiler: | C/C++: Version 12.1.0 of Intel Compiler XE Build 20111011 |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V8.1 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 24 | 637 | 368 | 640 | 366 | 637 | 368 | 24 | 552 | 425 | 549 | 427 | 543 | 431 |
401.bzip2 | 24 | 983 | 236 | 980 | 236 | 983 | 236 | 24 | 945 | 245 | 981 | 236 | 984 | 235 |
403.gcc | 24 | 766 | 252 | 772 | 250 | 767 | 252 | 24 | 766 | 252 | 772 | 250 | 767 | 252 |
429.mcf | 24 | 510 | 429 | 484 | 452 | 486 | 450 | 24 | 510 | 429 | 484 | 452 | 486 | 450 |
445.gobmk | 24 | 626 | 402 | 627 | 401 | 629 | 400 | 24 | 595 | 423 | 597 | 422 | 598 | 421 |
456.hmmer | 24 | 439 | 510 | 440 | 509 | 440 | 508 | 12 | 192 | 582 | 192 | 583 | 192 | 582 |
458.sjeng | 24 | 733 | 396 | 734 | 395 | 734 | 396 | 24 | 686 | 423 | 685 | 424 | 686 | 423 |
462.libquantum | 24 | 184 | 2710 | 184 | 2710 | 183 | 2720 | 24 | 184 | 2710 | 184 | 2710 | 183 | 2720 |
464.h264ref | 24 | 930 | 571 | 930 | 571 | 937 | 567 | 24 | 923 | 576 | 926 | 574 | 967 | 549 |
471.omnetpp | 24 | 640 | 234 | 639 | 235 | 639 | 235 | 24 | 616 | 243 | 616 | 243 | 615 | 244 |
473.astar | 24 | 682 | 247 | 683 | 247 | 685 | 246 | 24 | 682 | 247 | 683 | 247 | 685 | 246 |
483.xalancbmk | 24 | 395 | 420 | 396 | 419 | 395 | 420 | 24 | 395 | 420 | 396 | 419 | 395 | 420 |
The config file option 'submit' was used. numactl was used to bind copies to the cores
'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run. Large pages were not enabled for this run
Data Reuse disabled in BIOS.
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/home/rcaneca/sh/SmartHeap_8.1/lib -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
471.omnetpp: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/home/rcaneca/sh/SmartHeap_8.1/lib -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |