# Invocation command line:
# /cpu2006/bin/runspec -c amd1104il-rate-revA.cfg --rate --tune all int --nopreenv --note-preenv
# output_root was not used for this run
############################################################################
# AMD1104 SPEC CPU2006 V1.1 Rate Configuration File for 64-bit Linux
#
#
#      CPU2006 Version              1.1
#      Compiler name/version:       Open64 4.2.5
#      Operating system version:    64-bit Linux
#      Hardware:                    AMD Opteron (Orochi)
#      FP Base Pointer Size:        64-bit only
#      FP Peak Pointer Size:        32/64-bit
#      INT Base Pointer Size:       32/64-bit
#      INT Peak Pointer Size:       32/64-bit
#      Auto Parallization:          No
#
# Important! Please run with your stack size set to 'unlimited'.
# Failure to do so may cause some benchmarks to get a stack
# overflow during execution.
# Using csh:  unlimit
# Using bash: ulimit -s unlimited
#
# Your LD_LIBRARY_PATH must be set to the location of the dependent
# runtime libraries.  (Though this should be taken care of by the
# preENV_LD_LIBRARY_PATH found in the AMD1104il-rate-revX.inc file.)
# This line should be commented out during builds.
#
#####################################################################

ext            = amd1104-rate-revA
ignore_errors  = no
tune           = base,peak
output_format  = all
flagsurl000    = http://www.spec.org/cpu2006/flags/x86-open64-425-flags-rate-revA.xml
                 $[top]/amd1104-platform-rate-revA.xml
size           = test,train,ref
check_md5      = yes
reportable     = yes
env_vars       = no
teeout         = yes
mean_anyway    = yes
teerunout      = yes
post_setup     = sync
verbose        = 6

####################################################################
# Include file containing the commonly changed fields
####################################################################

%define inc_file_name AMD1104il-rate-revA.inc
#include: %{inc_file_name}
#  ----- Begin inclusion of 'AMD1104il-rate-revA.inc'
############################################################################
#####################################################################
# Paths
#####################################################################

# Set location of run time libraries for runs.
preENV_LD_LIBRARY_PATH = $[top]/amd1104-rate-libs-revA/32:$[top]/amd1104-rate-libs-revA/64

# Set this path to your SmartHeap Library for builds.
SMARTHEAP_DIR = /root/work/libraries/SmartHeap-10/lib

#####################################################################
# Machine Specific Settings
#####################################################################

# If your machine orders nodes sequentially and your using 8GB
# memory sticks,  most settings should be correctly configured
# based on the below three settings.  See README.amd1104il-rate
# for more information.

# How many sockets does your test system have? (1, 2, or 4)
%define num_sockets 2

# How many cores per socket does your system have? (8, 12, or 16)
%define cores_per_socket 16

# Approximately how much memory (in GB) do you have in your system?
# (16, 32, 64, 128, 256)
# If between two values round down, and if over 256GB choose 256.  If you
# dont have these exact amounts of memory installed the "Memory" description
# line below will need to be updated.
%define memory_size 128

# What is the frequency of the memory in your system?
# (1333, 1600)
%define memory_freq 1333

########################################################################
# You should not need to change anything in this section unless you have
# a non-standard configuration.  See README.amd1104il-rate for more
# information.
########################################################################

%if '%{cores_per_socket}' eq '16'
% define cores_per_node 8
% define total_I_cache 512
% if ('%{num_sockets}' eq '1')
%  if ('%{memory_size}' eq '16')
%   error These SPEC CPU binaries require at least 2GB memory per core, and the value for "memory_size" in %{inc_file_name} indicates you have not met this requirement.  This error was generated
%  elif ('%{memory_size}' eq '32')
%   define GB_mem_per_core 2
%   define mem_sticks 4
%   define num_system_huge_pages 0
%  elif ('%{memory_size}' eq '64')
%   define GB_mem_per_core 4
%   define mem_sticks 8
%   define num_system_huge_pages 14336
%  elif ('%{memory_size}' eq '128')
%   define GB_mem_per_core 4
%   define mem_sticks 16
%   define num_system_huge_pages 14336
%  elif ('%{memory_size}' eq '256')
%   define GB_mem_per_core 4
%   define mem_sticks 32
%   define num_system_huge_pages 14336
%  else
%   error Please define "memory_size" to a valid value in %{inc_file_name}.  This error was generated
%  endif #memory_size

% elif ('%{num_sockets}' eq '2')
%  if ('%{memory_size}' eq '16' || '%{memory_size}' eq '32')
%   error These SPEC CPU binaries require at least 2GB memory per core, and the value for "memory_size" in %{inc_file_name} indicates you have not met this requirement.  This error was generated
%  elif ('%{memory_size}' eq '64')
%   define GB_mem_per_core 2
%   define mem_sticks 16
%   define num_system_huge_pages 0
%  elif ('%{memory_size}' eq '128')
%   define GB_mem_per_core 4
%   define mem_sticks 16
%   define num_system_huge_pages 28672
%  elif ('%{memory_size}' eq '256')
%   define GB_mem_per_core 4
%   define mem_sticks 32
%   define num_system_huge_pages 28672
%  else
%   error Please define "memory_size" to a valid value in %{inc_file_name}.  This error was generated
%  endif #memory_size

% elif ('%{num_sockets}' eq '4')
%  if ('%{memory_size}' eq '16' || '%{memory_size}' eq '32' || '%{memory_size}' eq '64')
%   error These SPEC CPU binaries require at least 2GB memory per core, and the value for "memory_size" in %{inc_file_name} indicates you have not met this requirement.  This error was generated
%  elif ('%{memory_size}' eq '128')
%   define GB_mem_per_core 2
%   define mem_sticks 16
%   define num_system_huge_pages 0
%  elif ('%{memory_size}' eq '256')
%   define GB_mem_per_core 4
%   define mem_sticks 32
%   define num_system_huge_pages 57344
%  else
%   error Please define "memory_size" to a valid value in %{inc_file_name}.  This error was generated
%  endif #memory_size
% endif #num_sockets

## 12-core ##

%elif '%{cores_per_socket}' eq '12'
% define cores_per_node 6
% define total_I_cache 384
% if ('%{num_sockets}' eq '1')
%  if ('%{memory_size}' eq '16')
%   error These SPEC CPU binaries require at least 2GB memory per core, and the value for "memory_size" in %{inc_file_name} indicates you have not met this requirement.  This error was generated
%  elif ('%{memory_size}' eq '32')
%   define GB_mem_per_core 3
%   define mem_sticks 4
%   define num_system_huge_pages 5760
%  elif ('%{memory_size}' eq '64')
%   define GB_mem_per_core 4
%   define mem_sticks 8
%   define num_system_huge_pages 10752
%  elif ('%{memory_size}' eq '128')
%   define GB_mem_per_core 4
%   define mem_sticks 16
%   define num_system_huge_pages 10752
%  elif ('%{memory_size}' eq '256')
%   define GB_mem_per_core 4
%   define mem_sticks 32
%   define num_system_huge_pages 10752
%  else
%   error Please define "memory_size" to a valid value in %{inc_file_name}.  This error was generated
%  endif #memory_size

% elif ('%{num_sockets}' eq '2')
%  if ('%{memory_size}' eq '16' || '%{memory_size}' eq '32')
%   error These SPEC CPU binaries require at least 2GB memory per core, and the value for "memory_size" in %{inc_file_name} indicates you have not met this requirement.  This error was generated
%  elif ('%{memory_size}' eq '64')
%   define GB_mem_per_core 3
%   define mem_sticks 8
%   define num_system_huge_pages 11520
%  elif ('%{memory_size}' eq '128')
%   define GB_mem_per_core 4
%   define mem_sticks 16
%   define num_system_huge_pages 21504
%  elif ('%{memory_size}' eq '256')
%   define GB_mem_per_core 4
%   define mem_sticks 32
%   define num_system_huge_pages 21504
%  else
%   error Please define "memory_size" to a valid value in %{inc_file_name}.  This error was generated
%  endif #memory_size

% elif ('%{num_sockets}' eq '4')
%  if ('%{memory_size}' eq '16' || '%{memory_size}' eq '32' || '%{memory_size}' eq '64')
%   error These SPEC CPU binaries require at least 2GB memory per core, and the value for "memory_size" in %{inc_file_name} indicates you have not met this requirement.  This error was generated
%  elif ('%{memory_size}' eq '128')
%   define GB_mem_per_core 3
%   define mem_sticks 16
%   define num_system_huge_pages 23040
%  elif ('%{memory_size}' eq '256')
%   define GB_mem_per_core 4
%   define mem_sticks 32
%   define num_system_huge_pages 43008
%  else
%   error Please define "memory_size" to a valid value in %{inc_file_name}.  This error was generated
%  endif #memory_size
% endif #num_sockets

## 8-core ##

%elif '%{cores_per_socket}' eq '8'
% define cores_per_node 4
% define total_I_cache 256
% if ('%{num_sockets}' eq '1')
%  if ('%{memory_size}' eq '16')
%   define GB_mem_per_core 2
%   define mem_sticks 2
%   define num_system_huge_pages 0
%  elif ('%{memory_size}' eq '32')
%   define GB_mem_per_core 4
%   define mem_sticks 4
%   define num_system_huge_pages 7168
%  elif ('%{memory_size}' eq '64')
%   define GB_mem_per_core 4
%   define mem_sticks 16
%   define num_system_huge_pages 7168
%  elif ('%{memory_size}' eq '128')
%   define GB_mem_per_core 4
%   define mem_sticks 16
%   define num_system_huge_pages 7168
%  elif ('%{memory_size}' eq '256')
%   define GB_mem_per_core 4
%   define mem_sticks 32
%   define num_system_huge_pages 7168
%  else
%   error Please define "memory_size" to a valid value in %{inc_file_name}.  This error was generated
%  endif #memory_size

% elif ('%{num_sockets}' eq '2')
%  if ('%{memory_size}' eq '16')
%   error These SPEC CPU binaries require at least 2GB memory per core, and the value for "memory_size" in %{inc_file_name} indicates you have not met this requirement.  This error was generated
%  elif ('%{memory_size}' eq '32')
%   define GB_mem_per_core 2
%   define mem_sticks 8
%   define num_system_huge_pages 0
%  elif ('%{memory_size}' eq '64')
%   define GB_mem_per_core 4
%   define mem_sticks 8
%   define num_system_huge_pages 14336
%  elif ('%{memory_size}' eq '128')
%   define GB_mem_per_core 4
%   define mem_sticks 16
%   define num_system_huge_pages 14336
%  elif ('%{memory_size}' eq '256')
%   define GB_mem_per_core 4
%   define mem_sticks 32
%   define num_system_huge_pages 14336
%  else
%   error Please define "memory_size" to a valid value in %{inc_file_name}.  This error was generated
%  endif #memory_size

% elif ('%{num_sockets}' eq '4')
%  if ('%{memory_size}' eq '16' || '%{memory_size}' eq '32')
%   error These SPEC CPU binaries require at least 2GB memory per core, and the value for "memory_size" in %{inc_file_name} indicates you have not met this requirement.  This error was generated
%  elif ('%{memory_size}' eq '64')
%   define GB_mem_per_core 2
%   define mem_sticks 16
%   define num_system_huge_pages 0
%  elif ('%{memory_size}' eq '128')
%   define GB_mem_per_core 4
%   define mem_sticks 16
%   define num_system_huge_pages 28672
%  elif ('%{memory_size}' eq '256')
%   define GB_mem_per_core 4
%   define mem_sticks 32
%   define num_system_huge_pages 28672
%  else
%   error Please define "memory_size" to a valid value in %{inc_file_name}.  This error was generated
%  endif #memory_size
% endif #num_sockets
%endif #cores_per_socket

%define total_L2_cache %{cores_per_socket}
%warning Please ensure you have %{num_system_huge_pages} huge pages configured on this system.  This message was generated

####################################################################
# Tester information
####################################################################
license_num     = 3
prepared_by     = Hewlett-Packard Company
tester          = Hewlett-Packard Company
test_sponsor    = Hewlett-Packard Company
hw_vendor       = Hewlett-Packard Company
hw_model000     = ProLiant DL385 G7
hw_model001     = (1.6 GHz AMD Opteron 6262 HE)

####################################################################
# Hardware information
####################################################################
hw_avail           = Nov-2011
hw_cpu_name        = AMD Opteron 6262 HE
hw_cpu_char        = AMD Turbo CORE technology up to 2.90 GHz
hw_cpu_mhz         = 1600
hw_fpu             = Integrated
hw_nchips          = 2
hw_ncores          = 32
hw_ncoresperchip   = 16
hw_nthreadspercore = 1
hw_ncpuorder       = 1,2 chips
hw_pcache000       = 512 KB I on chip per chip,
hw_pcache001 = 64 KB I shared / 2 cores;
hw_pcache002 = 16 KB D on chip per core
hw_scache          = 16 MB I+D on chip per chip, 2 MB shared / 2 cores
hw_tcache          = 16 MB I+D on chip per chip, 8 MB shared / 8 cores
hw_ocache          = None
hw_disk            = 2 x 146 GB 7.2 K SATA
%if ('%{memory_freq}' eq '1333')
 hw_memory         = 128 GB (16 x 8 GB 2Rx4 PC3-10600R-9, ECC)
%elif ('%{memory_freq}' eq '1600')
 hw_memory         = %{memory_size} GB (%{mem_sticks} x 8 GB 2Rx4 PC3-12800R-11, ECC)
%else
% error Please define "memory_freq" to a valid value in %{inc_file_name}.  This error was generated
%endif #memory_freq
hw_other           = None
sw_file            = ext3
sw_os000           = Red Hat Enterprise Linux Server release 6.1,
sw_os001           = Kernel 2.6.32-131.0.15.el6.x86_64
sw_state           = Run level 3 (multi-user)

#####################################################################
# Notes
#####################################################################
notes_020 =The x86 Open64 Compiler Suite is only available from (and supported by) AMD at
notes_025 =http://developer.amd.com/cpu/open64

notes_submit_000 ='numactl' was used to bind copies to the cores.
notes_submit_005 =See the configuration file for details.

notes_os_000 ='ulimit -s unlimited' was used to set environment stack size
notes_os_005 ='ulimit -l 2097152'  was used to set environment locked pages in memory limit
notes_os_010 =
notes_os_015 =Set "echo never > /sys/kernel/mm/redhat_transparent_hugepage/enabled"
notes_os_020 =Set "kernel/randomize_va_space=0" in /etc/sysctl.conf
%if '%{num_system_huge_pages}' ne '0'
  notes_os_025 =
  notes_os_030 =Set vm/nr_hugepages=28672 in /etc/sysctl.conf
  notes_os_035 =Set "nodev       /mnt/hugepages    hugetlbfs   defaults  0 0" in /etc/fstab
%else
  notes_os_025 =
  notes_os_030 =Huge pages were not configured for this run.
%endif #num_system_huge_pages

# ---- End inclusion of '/cpu2006/config/AMD1104il-rate-revA.inc'

# Required for SPEC CPU v1.1 and earlier submissions
parallel_test = 1

####################################################
# Auto-configured settings based on your .inc file #
####################################################

%if '%{GB_mem_per_core}' eq '4'
  preENV_HUGETLB_LIMIT = 896
%elif '%{GB_mem_per_core}' eq '3'
  preENV_HUGETLB_LIMIT = 480
%elif '%{GB_mem_per_core}' eq '2'
  #No huge pages should be configured, so do nothing
%endif #GB_mem_per_core

%if '%{cores_per_socket}' eq '16'
  bind0  = numactl -m 0 --physcpubind=0
  bind1  = numactl -m 0 --physcpubind=2
  bind2  = numactl -m 0 --physcpubind=4
  bind3  = numactl -m 0 --physcpubind=6
  bind4  = numactl -m 0 --physcpubind=8
  bind5  = numactl -m 0 --physcpubind=10
  bind6  = numactl -m 0 --physcpubind=12
  bind7  = numactl -m 0 --physcpubind=14
  bind8  = numactl -m 1 --physcpubind=16
  bind9  = numactl -m 1 --physcpubind=18
  bind10 = numactl -m 1 --physcpubind=20
  bind11 = numactl -m 1 --physcpubind=22
  bind12 = numactl -m 1 --physcpubind=24
  bind13 = numactl -m 1 --physcpubind=26
  bind14 = numactl -m 1 --physcpubind=28
  bind15 = numactl -m 1 --physcpubind=30
  bind16 = numactl -m 2 --physcpubind=1
  bind17 = numactl -m 2 --physcpubind=3
  bind18 = numactl -m 2 --physcpubind=5
  bind19 = numactl -m 2 --physcpubind=7
  bind20 = numactl -m 2 --physcpubind=9
  bind21 = numactl -m 2 --physcpubind=11
  bind22 = numactl -m 2 --physcpubind=13
  bind23 = numactl -m 2 --physcpubind=15
  bind24 = numactl -m 3 --physcpubind=17
  bind25 = numactl -m 3 --physcpubind=19
  bind26 = numactl -m 3 --physcpubind=21
  bind27 = numactl -m 3 --physcpubind=23
  bind28 = numactl -m 3 --physcpubind=25
  bind29 = numactl -m 3 --physcpubind=27
  bind30 = numactl -m 3 --physcpubind=29
  bind31 = numactl -m 3 --physcpubind=31
#  bind32 = numactl -m 4 --physcpubind=32
#  bind33 = numactl -m 4 --physcpubind=33
#  bind34 = numactl -m 4 --physcpubind=34
#  bind35 = numactl -m 4 --physcpubind=35
#  bind36 = numactl -m 4 --physcpubind=36
#  bind37 = numactl -m 4 --physcpubind=37
#  bind38 = numactl -m 4 --physcpubind=38
#  bind39 = numactl -m 4 --physcpubind=39
#  bind40 = numactl -m 5 --physcpubind=40
#  bind41 = numactl -m 5 --physcpubind=41
#  bind42 = numactl -m 5 --physcpubind=42
#  bind43 = numactl -m 5 --physcpubind=43
#  bind44 = numactl -m 5 --physcpubind=44
#  bind45 = numactl -m 5 --physcpubind=45
#  bind46 = numactl -m 5 --physcpubind=46
#  bind47 = numactl -m 5 --physcpubind=47
#  bind48 = numactl -m 6 --physcpubind=48
#  bind49 = numactl -m 6 --physcpubind=49
#  bind50 = numactl -m 6 --physcpubind=50
#  bind51 = numactl -m 6 --physcpubind=51
#  bind52 = numactl -m 6 --physcpubind=52
#  bind53 = numactl -m 6 --physcpubind=53
#  bind54 = numactl -m 6 --physcpubind=54
#  bind55 = numactl -m 6 --physcpubind=55
#  bind56 = numactl -m 7 --physcpubind=56
#  bind57 = numactl -m 7 --physcpubind=57
#  bind58 = numactl -m 7 --physcpubind=58
#  bind59 = numactl -m 7 --physcpubind=59
#  bind60 = numactl -m 7 --physcpubind=60
#  bind61 = numactl -m 7 --physcpubind=61
#  bind62 = numactl -m 7 --physcpubind=62
#  bind63 = numactl -m 7 --physcpubind=63

% if '%{num_sockets}' eq '1'
#   Config settings for 1P OR-16 system
    copies = 16
%   define num_nodes 2

% elif '%{num_sockets}' eq '2'
#   Config settings for 2P OR-16 system
    copies = 32
%   define num_nodes 4

% elif '%{num_sockets}' eq '4'
#   Config settings for 4P OR-16 system
    copies = 64
%   define num_nodes 8

% else #num_sockets
%   error Please define "num_sockets" to either '1', '2', or '4' in %{inc_file_name}.  This error was generated
% endif #num_sockets

%elif '%{cores_per_socket}' eq '12'
  bind0  = numactl -m 0 --physcpubind=0
  bind1  = numactl -m 0 --physcpubind=1
  bind2  = numactl -m 0 --physcpubind=2
  bind3  = numactl -m 0 --physcpubind=3
  bind4  = numactl -m 0 --physcpubind=4
  bind5  = numactl -m 0 --physcpubind=5
  bind6  = numactl -m 1 --physcpubind=6
  bind7  = numactl -m 1 --physcpubind=7
  bind8  = numactl -m 1 --physcpubind=8
  bind9  = numactl -m 1 --physcpubind=9
  bind10 = numactl -m 1 --physcpubind=10
  bind11 = numactl -m 1 --physcpubind=11
  bind12 = numactl -m 2 --physcpubind=12
  bind13 = numactl -m 2 --physcpubind=13
  bind14 = numactl -m 2 --physcpubind=14
  bind15 = numactl -m 2 --physcpubind=15
  bind16 = numactl -m 2 --physcpubind=16
  bind17 = numactl -m 2 --physcpubind=17
  bind18 = numactl -m 3 --physcpubind=18
  bind19 = numactl -m 3 --physcpubind=19
  bind20 = numactl -m 3 --physcpubind=20
  bind21 = numactl -m 3 --physcpubind=21
  bind22 = numactl -m 3 --physcpubind=22
  bind23 = numactl -m 3 --physcpubind=23
  bind24 = numactl -m 4 --physcpubind=24
  bind25 = numactl -m 4 --physcpubind=25
  bind26 = numactl -m 4 --physcpubind=26
  bind27 = numactl -m 4 --physcpubind=27
  bind28 = numactl -m 4 --physcpubind=28
  bind29 = numactl -m 4 --physcpubind=29
  bind30 = numactl -m 5 --physcpubind=30
  bind31 = numactl -m 5 --physcpubind=31
  bind32 = numactl -m 5 --physcpubind=32
  bind33 = numactl -m 5 --physcpubind=33
  bind34 = numactl -m 5 --physcpubind=34
  bind35 = numactl -m 5 --physcpubind=35
  bind36 = numactl -m 6 --physcpubind=36
  bind37 = numactl -m 6 --physcpubind=37
  bind38 = numactl -m 6 --physcpubind=38
  bind39 = numactl -m 6 --physcpubind=39
  bind40 = numactl -m 6 --physcpubind=40
  bind41 = numactl -m 6 --physcpubind=41
  bind42 = numactl -m 7 --physcpubind=42
  bind43 = numactl -m 7 --physcpubind=43
  bind44 = numactl -m 7 --physcpubind=44
  bind45 = numactl -m 7 --physcpubind=45
  bind46 = numactl -m 7 --physcpubind=46
  bind47 = numactl -m 7 --physcpubind=47

% if '%{num_sockets}' eq '1'
#   Config settings for 1P OR-12 system
    copies = 12
%   define num_nodes 2

% elif '%{num_sockets}' eq '2'
#   Config settings for 2P OR-12 system
    copies = 24
%   define num_nodes 4

% elif '%{num_sockets}' eq '4'
#   Config settings for 4P OR-12 system
    copies = 48
%   define num_nodes 8

% else #num_sockets
%   error Please define "num_sockets" to either '1', '2', or '4' in %{inc_file_name}.  This error was generated
% endif #num_sockets

%elif '%{cores_per_socket}' eq '8'
  bind0  = numactl -m 0 --physcpubind=0
  bind1  = numactl -m 0 --physcpubind=2
  bind2  = numactl -m 0 --physcpubind=4
  bind3  = numactl -m 0 --physcpubind=6
  bind4  = numactl -m 1 --physcpubind=8
  bind5  = numactl -m 1 --physcpubind=10
  bind6  = numactl -m 1 --physcpubind=12
  bind7  = numactl -m 1 --physcpubind=14
  bind8  = numactl -m 2 --physcpubind=1
  bind9  = numactl -m 2 --physcpubind=3
  bind10 = numactl -m 2 --physcpubind=5
  bind11 = numactl -m 2 --physcpubind=7
  bind12 = numactl -m 3 --physcpubind=9
  bind13 = numactl -m 3 --physcpubind=11
  bind14 = numactl -m 3 --physcpubind=13
  bind15 = numactl -m 3 --physcpubind=15

% if '%{num_sockets}' eq '1'
#   Config settings for 1P OR-8 system
    copies = 8
%   define num_nodes 2

% elif '%{num_sockets}' eq '2'
#   Config settings for 2P OR-8 system
    copies = 16
%   define num_nodes 4

% elif '%{num_sockets}' eq '4'
#   Config settings for 4P OR-8 system
    copies = 32
%   define num_nodes 8

% else #num_sockets
%   error Please define "num_sockets" to either '1', '2', or '4' in %{inc_file_name}.  This error was generated
% endif #num_sockets

%else #cores_per_socket
% error Please define "cores_per_socket" to either '8', '12', or '16' in %{inc_file_name}.  This error was generated
%endif #cores_per_socket

################################
# End auto-configured settings #
################################

submit = echo "$command" > run.sh ; $BIND bash run.sh

############################ Software Info   ############################
fp=default=default=default:
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = 32/64-bit
sw_avail        = Jul-2011
sw_compiler     = x86 Open64 4.2.5.2 Compiler Suite (from AMD)
sw_other        = None

int=default=default=default:
sw_base_ptrsize = 32/64-bit
sw_peak_ptrsize = 32/64-bit
sw_avail        = Jul-2011
sw_compiler000  = C/C++: Version 4.2.5.2 of
sw_compiler001 = x86 Open64 Compiler Suite (from AMD)
sw_other        = SmartHeap 10.0 32-bit Library for Linux

default=default=default=default:

#####################################################################
# Compiler selection
#
#

CC  = opencc -march=bdver1
CXX = openCC -march=bdver1
FC  = openf95 -march=bdver1

#####################################################################
# Portability for default 64-bit code generation
#####################################################################

default=default=default:
PORTABILITY = -DSPEC_CPU_LP64

#####################################################################
# INT Portability
#####################################################################

400.perlbench=default=default:
CPORTABILITY = -DSPEC_CPU_LINUX_X64

403.gcc=peak=default:
PORTABILITY =

429.mcf=peak=default:
PORTABILITY =

462.libquantum=default=default:
CPORTABILITY = -DSPEC_CPU_LINUX

471.omnetpp=default=default:
# Needed to avoid -DSPEC_CPU_LP64 on -m32 C++ base codes
PORTABILITY =

473.astar=default=default:
# Needed to avoid -DSPEC_CPU_LP64 on -m32 C++ base codes
PORTABILITY =

483.xalancbmk=default=default:
CXXPORTABILITY = -DSPEC_CPU_LINUX
# Needed to avoid -DSPEC_CPU_LP64 on -m32 C++ base codes
PORTABILITY =

#################################################################
#                                                               #
#          SPECint Tuning & Notes                               #
#                                                               #
#################################################################

int=base:
COPTIMIZE       = -Ofast -CG:local_sched_alg=1 -INLINE:aggressive=on -IPA:plimit=8000:small_pu=100 -HP:bd=2m:heap=2m -mso -LNO:prefetch=2
CXXOPTIMIZE     = -Ofast -m32 -INLINE:aggressive=on -CG:cmp_peep=on -D__OPEN64_FAST_SET
EXTRA_CXXLIBS   = -L$(SMARTHEAP_DIR) -lsmartheap
sw_base_ptrsize = 32/64-bit
sw_peak_ptrsize = 32/64-bit

#####################################################################
# INT Peak Tuning
#####################################################################

int=peak=default:
COPTIMIZE      = -Ofast -CG:local_sched_alg=1 -HP:bdt=2m:heap=2m
CXXOPTIMIZE    = -Ofast -m32 -HP:bdt=2m:heap=2m -D__OPEN64_FAST_SET
PASS1_CFLAGS   = -fb_create fbdata
PASS1_CXXFLAGS = -fb_create fbdata
PASS1_LDFLAGS  = -fb_create fbdata
PASS2_CFLAGS   = -fb_opt fbdata
PASS2_CXXFLAGS = -fb_opt fbdata
PASS2_LDFLAGS  = -fb_opt fbdata

400.perlbench=peak=default:
COPTIMIZE = -Ofast -LNO:prefetch=2:opt=0 -IPA:plimit=20000 -OPT:unroll_times_max=8:unroll_size=256:unroll_level=2:keep_ext=on -WOPT:if_conv=0:sib=on -CG:local_sched_alg=1:unroll_fb_req=on:movext_icmp=off -HP:bd=2m:heap=2m

401.bzip2=peak=default:
COPTIMIZE = -O3 -LNO:prefetch=2:pf2=0 -OPT:alias=disjoint:goto=off -CG:local_sched_alg=1 -HP:bdt=2m:heap=2m

403.gcc=peak=default:
COPTIMIZE = -Ofast -LNO:trip_count=256 -CG:cmp_peep=on:pre_minreg_level=2 -m32 -HP:bdt=2m:heap=2m -GRA:unspill=on -IPA:small_pu=200 -WOPT:sib=on

429.mcf=peak=default:
COPTIMIZE = -O3 -OPT:unroll_times_max=5 -ipa -INLINE:aggressive=on -CG:gcm=off -GRA:prioritize_by_density=on -m32 -HP:bdt=2m:heap=2m -mso
feedback = 0

445.gobmk=peak=default:
COPTIMIZE = -Ofast -OPT:unroll_size=256:unroll_times_max=8:keep_ext=on -IPA:plimit=750:min_hotness=300:pu_reorder=1 -LNO:ignore_feedback=off -WOPT:if_conv=2 -HP:bd=2m:heap=2m

456.hmmer=peak=default:
COPTIMIZE = -Ofast -LNO:prefetch=2 -OPT:alias=disjoint:unroll_times_max=16:unroll_size=512:unroll_level=2:keep_ext=on -CG:cflow=0:cmp_peep=on:pre_local_sched=off -HP:bdt=2m:heap=2m

458.sjeng=peak=default:
COPTIMIZE = -Ofast -CG:ptr_load_use=0:divrem_opt=on:movext_icmp=off:locs_best=on -LNO:full_unroll=10 -IPA:pu_reorder=2 -HP:bd=2m:heap=2m -WOPT:sib=on

462.libquantum=peak=default:
COPTIMIZE = -Ofast -mso -OPT:unroll_size=512:unroll_times_max=16 -LNO:prefetch=2:prefetch_ahead=4:pf2=0 -CG:local_sched_alg=1 -INLINE:aggressive=on -IPA:plimit=15000:small_pu=100 -HP:bdt=2m:heap=2m,limit=300
feedback = 0

464.h264ref=peak=default:
COPTIMIZE = -O3 -OPT:unroll_size=256:unroll_times_max=2 -IPA:plimit=20000 -OPT:alias=disjoint -CG:ptr_load_use=0:local_sched_alg=1 -HP:bdt=2m:heap=2m

471.omnetpp=peak=default:
basepeak = 1

473.astar=peak=default:
CXXOPTIMIZE = -Ofast -TENV:frame_pointer=off -WOPT:if_conv=0:sib=on -CG:divrem_opt=on -GRA:optimize_boundary=on -OPT:alias=disjoint -INLINE:aggressive=on -IPA:small_pu=3000:plimit=3000 -m32 -HP:bdt=2m:heap=2m

483.xalancbmk=peak=default:
CXXOPTIMIZE = -Ofast -LNO:prefetch=2 -OPT:unroll_size=512:unroll_times_max=8 -D__OPEN64_FAST_SET -INLINE:aggressive=on -m32 -CG:cmp_peep=on:local_sched=off -GRA:unspill=on -TENV:frame_pointer=off -fno-emit-exceptions
EXTRA_CXXLIBS = -L$(SMARTHEAP_DIR) -lsmartheap
feedback = 0

#####################################################################
# FP Portability
#####################################################################

436.cactusADM=default=default:
FPORTABILITY = -fno-second-underscore

447.dealII=peak=default:
# Needed to avoid -DSPEC_CPU_LP64 since peak is built with -m32
PORTABILITY =

450.soplex=peak=default:
# Needed to avoid -DSPEC_CPU_LP64
PORTABILITY =

481.wrf=default=default:
PORTABILITY = -DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LP64
FPORTABILITY = -fno-second-underscore

#################################################################
#                                                               #
#                        SPECfp Tuning                          #
#                                                               #
#################################################################

fp=base:
COPTIMIZE   = -Ofast -OPT:malloc_alg=1 -HP:bd=2m:heap=2m -IPA:plimit=8000:small_pu=100 -mso
CXXOPTIMIZE = -Ofast -static -CG:load_exe=0 -OPT:malloc_alg=1 -INLINE:aggressive=on -HP:bd=2m:heap=2m -D__OPEN64_FAST_SET
FOPTIMIZE   = -Ofast -LNO:blocking=off -OPT:rsqrt=2:unroll_size=256 -HP:bd=2m:heap=2m -mso

sw_base_ptrsize = 64-bit
sw_peak_ptrsize = 32/64-bit

#####################################################################
# FP Peak Tuning
#####################################################################

fp=peak=default:
COPTIMIZE      = -Ofast -HP:bdt=2m:heap=2m
CXXOPTIMIZE    = -Ofast -INLINE:aggressive=on -HP:bdt=2m:heap=2m -D__OPEN64_FAST_SET
FOPTIMIZE      = -Ofast -HP:bdt=2m:heap=2m
PASS1_CFLAGS   = -fb_create fbdata
PASS2_CFLAGS   = -fb_opt fbdata
PASS1_CXXFLAGS = -fb_create fbdata
PASS2_CXXFLAGS = -fb_opt fbdata
PASS1_FFLAGS   = -fb_create fbdata
PASS2_FFLAGS   = -fb_opt fbdata
PASS1_LDFLAGS  = -fb_create fbdata
PASS2_LDFLAGS  = -fb_opt fbdata

410.bwaves=peak=default:
FOPTIMIZE = -Ofast -OPT:Ofast:treeheight=on -LNO:blocking=off:ignore_feedback=off:fu=4:loop_model_simd=on:simd_rm_unity_remainder=on -WOPT:aggstr=0 -HP:bdt=2m:heap=2m -CG:cmp_peep=on

416.gamess=peak=default:
FOPTIMIZE = -O3 -LNO:fu=6:blocking=0:simd=0 -OPT:Ofast:ro=3:unroll_size=256:unroll_times_max=2 -CG:local_sched_alg=1 -HP:bdt=2m:heap=2m -WOPT:sib=on

433.milc=peak=default:
COPTIMIZE = -Ofast -CG:movnti=1:locs_best=on -HP:bdt=2m:heap=2m -IPA:plimit=7000:callee_limit=1200 -OPT:struct_array_copy=2 -OPT:alias=field_sensitive -mso
feedback = 0

434.zeusmp=peak=default:
FOPTIMIZE = -Ofast -LNO:blocking=off:interchange=off -HP:bdt=2m:heap=2m
feedback = 0

435.gromacs=peak=default:
FOPTIMIZE = -Ofast -OPT:rsqrt=2 -HP:bdt=2m:heap=2m
COPTIMIZE = $(FOPTIMIZE)

436.cactusADM=peak=default:
FOPTIMIZE = -Ofast -LNO:blocking=off:prefetch=2 -HP -CG:locs_shallow_depth=1:load_exe=0 -WOPT:sib=on
COPTIMIZE = $(FOPTIMIZE)

437.leslie3d=peak=default:
FOPTIMIZE = -Ofast -CG:pre_minreg_level=2 -LNO:simd=0:fusion=2 -HP:bdt=2m:heap=2m -mso
feedback = 0

444.namd=peak=default:
CXXOPTIMIZE = -Ofast -LNO:ignore_feedback=off -CG:local_sched_alg=2:load_exe=0 -OPT:unroll_size=256 -fno-exceptions -HP:bdt=2m:heap=2m

447.dealII=peak=default:
CXXOPTIMIZE = -Ofast -D__OPEN64_FAST_SET -static -INLINE:aggressive=on -LNO:opt=0:simd=0 -fno-emit-exceptions -m32 -OPT:unroll_times_max=8:unroll_size=256:unroll_level=2 -HP:bdt=2m:heap=2m -GRA:unspill=on -CG:cmp_peep=on:movext_icmp=off -TENV:frame_pointer=off
feedback = 0

450.soplex=peak=default:
CXXOPTIMIZE = -O3 -INLINE:aggressive=on -OPT:RO=1:IEEE_arith=3:IEEE_NaN_Inf=off:fold_unsigned_relops=on -fno-exceptions -m32  -HP:bdt=2m:heap=2m -WOPT:sib=on

453.povray=peak=default:
CXXOPTIMIZE = -Ofast -CG:pre_local_sched=off -INLINE:aggressive=on -HP:bd=2m:heap=2m -OPT:transform=2:alias=disjoint -WOPT:aggcm=0

454.calculix=peak=default:
FOPTIMIZE = -Ofast -OPT:unroll_size=256 -GRA:optimize_boundary=on -HP:bdt=2m:heap=2m
COPTIMIZE = $(FOPTIMIZE)
feedback = 0

459.GemsFDTD=peak=default:
FOPTIMIZE = -Ofast -OPT:unroll_size=0 -LNO:fission=2 -CG:load_exe=0:local_sched_alg=2 -HP
feedback = 0

465.tonto=peak=default:
FOPTIMIZE = -Ofast -OPT:alias=no_f90_pointer_alias -LNO:blocking=off -CG:load_exe=1 -IPA:plimit=525 -HP:bdt=2m:heap=2m
feedback = 0

470.lbm=peak=default:
COPTIMIZE = -Ofast -CG:cmp_peep=on -OPT:unroll_times_max=8:unroll_size=256:unroll_level=2:keep_ext=on -HP:bdt=2m:heap=2m -IPA:plimit=8000:small_pu=100 -mso
feedback = 0

481.wrf=peak=default:
FOPTIMIZE = -Ofast -LNO:blocking=off -LANG:copyinout=off -IPA:callee_limit=5000 -GRA:prioritize_by_density=on -CG:load_exe=1 -HP -WOPT:sib=on
COPTIMIZE = $(FOPTIMIZE)
feedback = 0

482.sphinx3=peak=default:
COPTIMIZE = -Ofast -OPT:malloc_alg=2 -CG:cmp_peep=on:local_sched_alg=2 -INLINE:aggressive=on -LNO:prefetch=2:prefetch_ahead=4 -mso




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
flagsurl001 = http://www.spec.org/cpu2006/flags/hp-amd-linux-flags.20100330.xml
notes_000 =Environment variables set by runspec before the start of the run:
notes_005 =HUGETLB_LIMIT = "896"
notes_010 =LD_LIBRARY_PATH = "/cpu2006/amd1104-rate-libs-revA/32:/cpu2006/amd1104-rate-libs-revA/64"
notes_015 =
notes_plat_000 =BIOS configuration:
notes_plat_005 = HP Power Profile set to Maximum Performance
notes_plat_010 = Thermal Configuration set to Increased Cooling