# Invocation command line: # /autobench/sources/speccpu2006/bin/runspec --config fp-saturn.cfg --action run --rate 1 --copies 384 --parallel_setup 384 --parallel_setup_type submit --parallel_test=1 --reportable --nobuild --tune all --iterations 3 --extension sles11sp1-julyptf fp # output_root was not used for this run ############################################################################ ####################################################################### # # SPEC CPU2006 Benchmark Config file IBM eServer pSeries Linux # ####################################################################### # THIS CONFIG FILE IS FOR BUILDING on P6 # # --define (-S) options that are passed to the runspec command # that dynamically affect this config file # # numcores=n The number of cores in the system # to determine how many copies to run in rate # # mybaseopt=x Allows override where x=3,4,5 (-O3, -O4, -O5) for base runs # # nolibhuge Allows override to not use extra libraries on base runs # nosmartheap # # debug Adds debug ('-g') compiler option %define P7 -qarch=pwr7 -qtune=pwr7 %define LHBDT -B/usr/share/libhugetlbfs/ -tl -Wl,--hugetlbfs-align %define LHLIB -lhugetlbfs ###################################### %define FDPROPTS -O4 -omullX %define FDPRINT %define make_j 3 #====================================================================== # Global Options apply to all runs #====================================================================== # # For just a report generated without a raw file or any runs required # Do a "runspec --reportonly" (also --action=report or --fakereport) # # Just set up the build or run directories, use --buildsetup or --setup # on the runspec command # Sets nobuild as the default - you will need -D to force a compile # nobuild = 1 # -D forces a build (recompile) # -N prohibits a build (recompile) action = validate # -a tune = base,peak # -T iterations = 3 # -n output_format = text,html,csv # -o reportable = 1 # -l turns off ignore_errors = 0 # -I mean_anyway = 1 allow_extension_override = 1 ext = XL-ppc64 # -e size = ref post_setup = sync parallel_test = 1 # Include the run-time derived system information so that each # system run has the correct information #include: SUT.inc # ----- Begin inclusion of 'SUT.inc' ############################################################################ # company_name = IBM Corporation hw_vendor = IBM Corporation license_num = 11 sw_state = Run level 3 (multi-user) hw_cpu_mhz = 3444 hw_cpu_name = POWER7 hw_memory = 1 TB (64 x 16 GB) DDR3 1066 MHz # # # hw_disk = 10 x 146.8 GB Raid0 SAS SFF 15K RPM # sw_os000 = SUSE Linux Enterprise Server 11 SP1 sw_os001 = (ppc64), Kernel 2.6.32.12-0.7-ppc64 sw_file = ext2 # # sw_avail = Jul-2011 # sw_compiler000 = C/C++: Version 11.1 of IBM XL C/C++ sw_compiler001 = for Linux; sw_compiler002 = Fortran: Version 13.1 of IBM XL Fortran sw_compiler003 = for Linux sw_other000= -IBM Post-Link Optimization for Linux sw_other001= on POWER, version 5.6.0-4 sw_other002= -MicroQuill SmartHeap 9 sw_other003= -Apache C++ Standard Library V4.2.1 notes_015 =The Apache C++ Standard Library V4.2.1 was installed from # hw_model = IBM Power 780 (3.44 GHz, 96 core, SLES) hw_avail =Oct-2011 # hw_ncpuorder =24,48,72,96 cores hw_nchips =16 hw_ncores = 96 hw_nthreadspercore = 4 hw_ncoresperchip =6 hw_pcache =32 KB I + 32 KB D on chip per core hw_fpu = Integrated hw_other =None # # hw_scache =256 KB I+D on chip per core hw_tcache =4 MB I+D on chip per core hw_ocache =None # # # notes_020 =http://stdcxx.apache.org/download.html using: notes_025 = gmake BUILDTYPE=8d CONFIG=gcc.config notes_030 =IBM Post-Link optimization tool can be downloaded from notes_035 =http://www-304.ibm.com/webapp/set2/sas/f/lopdiags/sdkdownload.html # # # # ppc64_cpu output # ---- End inclusion of '/autobench/sources/speccpu2006/config/SUT.inc' # This tells runspec to set enviornment variables of the form # ENV_xxx if found in here. Forced to 0 for reportable runs env_vars = 0 # Control if the embedded md5 string of compiler options is checked for # recompile if the options have changed check_md5 = 1 # Controls if the log file info is echo'd to the screen teeout = yes # If 1, make copy of the config file before modifing with MD5 # signitures of the compile options. backup_config = 0 # verbose -> -v #verbose = 1 to 99, 5 is default, 91 is good for debugging verbose = 1 %ifdef %{make_j} makeflags = -j%{make_j} %endif # We alway use submit to ensure there is a binding done. # use_submit_for_speed If set, use submit commands for speed as well as rate use_submit_for_speed = 1 bind = \ 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100 104 108 112 116 120 124 \ 128 132 136 140 144 148 152 156 160 164 168 172 176 180 184 188 192 196 200 204 208 212 216 220 224 \ 228 232 236 240 244 248 252 256 260 264 268 272 276 280 284 288 292 296 300 304 308 312 316 320 324 \ 328 332 336 340 344 348 352 356 360 364 368 372 376 380 \ 1 5 9 13 17 21 25 29 33 37 41 45 49 53 57 61 65 69 73 77 81 85 89 93 97 101 105 109 113 117 121 125 \ 129 133 137 141 145 149 153 157 161 165 169 173 177 181 185 189 193 197 201 205 209 213 217 221 225 \ 229 233 237 241 245 249 253 257 261 265 269 273 277 281 285 289 293 297 301 305 309 313 317 321 325 \ 329 333 337 341 345 349 353 357 361 365 369 373 377 381 \ 2 6 10 14 18 22 26 30 34 38 42 46 50 54 58 62 66 70 74 78 82 86 90 94 98 102 106 110 114 118 122 126 \ 130 134 138 142 146 150 154 158 162 166 170 174 178 182 186 190 194 198 202 206 210 214 218 222 226 \ 230 234 238 242 246 250 254 258 262 266 270 274 278 282 286 290 294 298 302 306 310 314 318 322 326 \ 330 334 338 342 346 350 354 358 362 366 370 374 378 382 \ 3 7 11 15 19 23 27 31 35 39 43 47 51 55 59 63 67 71 75 79 83 87 91 95 99 103 107 111 115 119 123 127 \ 131 135 139 143 147 151 155 159 163 167 171 175 179 183 187 191 195 199 203 207 211 215 219 223 227 \ 231 235 239 243 247 251 255 259 263 267 271 275 279 283 287 291 295 299 303 307 311 315 319 323 327 \ 331 335 339 343 347 351 355 359 363 367 371 375 379 383 submit = let "MYCPU=\$BIND"; MYMEM=`printf '%d' \$((\$MYCPU/24))` ; numactl --physcpubind=\$BIND --membind=\$MYMEM $command #--prevent log file lines that are too long for vi log_line_width = 130 # Point to where the usr/compiler/OS Flags file is flagsurl000 = http://www.spec.org/cpu2006/flags/IBM-Linux-XL.20101123.xml CC_PATH = /opt/ibmcmp/vac/11.1/bin CXX_PATH = /opt/ibmcmp/vacpp/11.1/bin XLF_PATH = /opt/ibmcmp/xlf/13.1/bin #=============================================================================== # How the compilers are called # The settings used here are for IBM C/C++ and xl Fortran compilers #=============================================================================== default=default=default=default: CC = $(CC_PATH)/xlc -qlanglvl=extc99 CXX = $(CXX_PATH)/xlC FC = $(XLF_PATH)/xlf95 %define IPAC -qipa=noobject %define IPAL -qipa=threads EXTRA_CFLAGS = %{IPAC} EXTRA_CXXFLAGS = %{IPAC} EXTRA_FFLAGS = %{IPAC} EXTRA_LDFLAGS = %{IPAL} #====================================================================== # Base Level Optimizations # No limit to number of flags, must be same for all of each Language. #====================================================================== default=base=default=default: sw_base_ptrsize = 32-bit %ifndef %{debug} %define DEBUG %else %define DEBUG -g %endif %define BASEOPT -O5 %{DEBUG} #====================================================================== # INT and FP Portability Flags # no optimizations allowed here #====================================================================== default=default=default=default: 400.perlbench=default=default=default: CPORTABILITY = -DSPEC_CPU_LINUX_PPC 462.libquantum=default=default=default: CPORTABILITY = -DSPEC_CPU_LINUX 464.h264ref=default=default=default: CPORTABILITY = -qchars=signed 483.xalancbmk=default=default=default: CXXPORTABILITY = -DSPEC_CPU_LINUX 410.bwaves=default=default=default: FPORTABILITY = -qfixed 416.gamess=default=default=default: FPORTABILITY = -qfixed 434.zeusmp=default=default=default: FPORTABILITY = -qfixed 435.gromacs=default=default=default: FPORTABILITY = -qfixed -qextname 436.cactusADM=default=default=default: FPORTABILITY = -qfixed -qextname 437.leslie3d=default=default=default: FPORTABILITY = -qfixed 447.dealII=default=default=default: srcalt=apache_stdcxx_4_2_1 454.calculix=default=default=default: FPORTABILITY = -qfixed -qextname 481.wrf=default=default=default: CPORTABILITY = -DNOUNDERSCORE 482.sphinx3=default=default=default: CPORTABILITY = -qchars=signed #====================================================================== # INT and FP Base Flags #====================================================================== int=base=default=default: COPTIMIZE = %{BASEOPT} -qalias=noansi -qalloca CXXOPTIMIZE = %{BASEOPT} -qrtti EXTRA_CLIBS = %{LHLIB} EXTRA_CXXLIBS = -lsmartheap fp=base=default=default: COPTIMIZE = %{BASEOPT} EXTRA_CLIBS = %{LHLIB} FOPTIMIZE = %{BASEOPT} -qalias=nostd EXTRA_FLIBS = %{LHLIB} CXXOPTIMIZE = -O4 -qrtti EXTRA_CXXFLAGS = %{IPAC} -qcpp_stdinc=/root/stdcxx421/include/ansi:/root/stdcxx421/include:/opt/ibmcmp/vacpp/11.1/include EXTRA_CXXLIBS = %{LHLIB} -L/root/stdcxx421/lib -R/root/stdcxx421/lib -lstd8d #====================================================================== # # Default peak flags. # #====================================================================== default=peak=default=default: sw_peak_ptrsize = 32/64-bit %define O2 -O2 -qarch=auto -qtune=auto %{DEBUG} %define O3 -O3 -qarch=auto -qtune=auto %{DEBUG} %define O4 -O4 %{DEBUG} %define O5 -O5 %{DEBUG} #====================================================================== # INT peak Flags #====================================================================== int=peak=default=default: 400.perlbench=peak=default=default: # C only Benchmark OPTIMIZE = %{O4} -qalias=noansi -qipa=level=2 EXTRA_LIBS = -lsmartheap LDCFLAGS = -Wl,-q PASS1_CFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_CFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 fdo_pre2 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr -imullX ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run2 = $command fdo_post2 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -omullX ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} CPORTABILITY = -DSPEC_CPU_LINUX_PPC -DSPEC_CPU_LP64 COPTIMIZE = -q64 %else CPORTABILITY = -DSPEC_CPU_LINUX_PPC %endif notes_peak_fdpr_400_000= fdpr binary optimization tool used for 400.perlbench notes_peak_fdpr_400_005= with options -O4 -omullX for optimization phase, notes_peak_fdpr_400_010= and -imullX for instrumentation phase 401.bzip2=peak=default=default: # C only Benchmark OPTIMIZE = %{O3} EXTRA_LIBS = %{LHLIB} LDCFLAGS = -Wl,-q PASS1_CFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_CFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 fdo_pre2 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run2 = $command fdo_post2 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -vrox ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} COPTIMIZE = -q64 %endif notes_peak_fdpr_401_000= fdpr binary optimization tool used for 401.bzip2 notes_peak_fdpr_401_005= with options -O4 -vrox 403.gcc=peak=default=default: # C only Benchmark OPTIMIZE = %{O4} -qalloca EXTRA_LIBS = %{LHLIB} LDCFLAGS = -Wl,-q PASS1_CFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_CFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 fdo_pre2 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run2 = $command fdo_post2 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -nodp -rtb ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} CPORTABILITY = -DSPEC_CPU_LP64 COPTIMIZE = -q64 %endif notes_peak_fdpr_403_000= fdpr binary optimization tool used for 403.gcc notes_peak_fdpr_403_005= with options -O4 -nodp -rtb 429.mcf=peak=default=default: # C only Benchmark OPTIMIZE = %{O5} EXTRA_LIBS = %{LHLIB} LDCFLAGS = -Wl,-q PASS1_CFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_CFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 fdo_pre2 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run2 = $command fdo_post2 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O3 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} COPTIMIZE = -q64 %endif notes_peak_fdpr_429_000= fdpr binary optimization tool used for 429.mcf notes_peak_fdpr_429_005= with options -O3 445.gobmk=peak=default=default: # C only Benchmark OPTIMIZE = %{O4} EXTRA_LIBS = %{LHLIB} LDCFLAGS = -Wl,-q PASS1_CFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_CFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 fdo_pre2 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run2 = $command fdo_post2 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O3 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} COPTIMIZE = -q64 %endif notes_peak_fdpr_445_000= fdpr binary optimization tool used for 445.gobmk notes_peak_fdpr_445_005= with options -O3 456.hmmer=peak=default=default: # C only Benchmark OPTIMIZE = %{O5} -qsimd -qassert=refalign -qipa=inline=threshold=2888 -qipa=inline=limit=11880 EXTRA_LIBS = %{LHLIB} LDCFLAGS = -Wl,-q fdo_pre1 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run1 = $command fdo_post1 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -nodp -m power7 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} COPTIMIZE = -q64 %endif notes_peak_fdpr_456_000= fdpr binary optimization tool used for 456.hmmer notes_peak_fdpr_456_005= with options -O4 -nodp -m power7 458.sjeng=peak=default=default: # C only Benchmark OPTIMIZE = %{O5} EXTRA_LIBS = %{LHLIB} LDCFLAGS = -Wl,-q PASS1_CFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_CFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 fdo_pre2 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run2 = $command fdo_post2 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O3 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} COPTIMIZE = -q64 %endif notes_peak_fdpr_458_000= fdpr binary optimization tool used for 458.sjeng notes_peak_fdpr_458_005= with options -O3 462.libquantum=peak=default=default: # C only Benchmark %define 64 OPTIMIZE = %{O5} EXTRA_LIBS = %{LHLIB} LDCFLAGS = -Wl,-q PASS1_CFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_CFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 fdo_pre2 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run2 = $command fdo_post2 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -vrox -nodp ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} COPTIMIZE = -q64 %endif %undef 64 notes_peak_fdpr_462_000= fdpr binary optimization tool used for 462.libquantum notes_peak_fdpr_462_005= with options -O4 -vrox -nodp 464.h264ref=peak=default=default: # C only Benchmark OPTIMIZE = %{O5} EXTRA_LIBS = %{LHLIB} LDCFLAGS = -Wl,-q PASS1_CFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_CFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 fdo_pre2 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run2 = $command fdo_post2 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -vrox -nodp -rtb ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} COPTIMIZE = -q64 %endif notes_peak_fdpr_464_000= fdpr binary optimization tool used for 464.h264ref notes_peak_fdpr_464_005= with options -O4 -vrox -nodp -rtb 471.omnetpp=peak=default=default: # C++ Benchmark OPTIMIZE = %{O5} -qrtti EXTRA_LIBS = -lsmartheap LDCXXFLAGS = -Wl,-q PASS1_CXXFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_CXXFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 fdo_pre2 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run2 = $command fdo_post2 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O3 -lu -1 -nodp -sdp 9 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} CXXOPTIMIZE = -q64 %endif notes_peak_fdpr_471_000= fdpr binary optimization tool used for 471.omnetpp notes_peak_fdpr_471_005= with options -O3 -lu -1 -nodp -sdp 9 473.astar=peak=default=default: # C++ Benchmark OPTIMIZE = %{O4} -qipa=inline=threshold=2468 -qipa=inline=limit=11060 -qipa=partition=large EXTRA_LIBS = %{LHLIB} -lsmartheap LDCXXFLAGS = -Wl,-q PASS1_CXXFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_CXXFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 fdo_pre2 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run2 = $command fdo_post2 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O3 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} CXXOPTIMIZE = -q64 %endif notes_peak_fdpr_473_000= fdpr binary optimization tool used for 473.astar notes_peak_fdpr_473_005= with options -O3 483.xalancbmk=peak=default=default: # C++ Benchmark OPTIMIZE = -O4 -qarch=pwr5 -qtune=pwr5 -qipa=inline=threshold=2468 -qipa=inline=limit=11060 -qipa=partition=large EXTRA_LIBS = -lsmartheap LDCXXFLAGS = -Wl,-q PASS1_CXXFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_CXXFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 fdo_pre2 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run2 = $command fdo_post2 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O3 -m power7 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} CXXOPTIMIZE = -q64 %endif notes_peak_fdpr_483_000= fdpr binary optimization tool used for 483.xalancbmk notes_peak_fdpr_483_005= with options -O3 -m power7 999.specrand=peak=default=default: # C only Benchmark - Must run, but not reported unless fails OPTIMIZE = %{O5} EXTRA_LIBS = %{LHLIB} PASS1_CFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_CFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 #====================================================================== # FP peak Flags #====================================================================== fp=peak=default=default: 410.bwaves=peak=default=default: # Fortran Benchmark %define 64 OPTIMIZE = %{O5} EXTRA_LIBS = %{LHLIB} PASS1_FFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_FFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 %ifdef %{64} FOPTIMIZE = -q64 %endif %undef 64 416.gamess=peak=default=default: # Fortran Benchmark OPTIMIZE = %{O5} -qalias=nostd EXTRA_LIBS = %{LHLIB} PASS1_FFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_FFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 %ifdef %{64} FOPTIMIZE = -q64 %endif 433.milc=peak=default=default: # C only Benchmark copies = 96 OPTIMIZE = %{O5} EXTRA_LIBS = %{LHLIB} LDCFLAGS = -Wl,-q fdo_pre1 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run1 = $command fdo_post1 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -nodp ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} COPTIMIZE = -q64 %endif notes_peak_fdpr_433_000= IBM Post-Link optimization tool used for: notes_peak_fdpr_433_005= 433.milc 435.gromacs 436.cactusADM 450.soplex 482.sphinx3 notes_peak_fdpr_433_010 = with options -O4 -nodp 434.zeusmp=peak=default=default: # Fortran Benchmark OPTIMIZE = %{O5} -qsmallstack=dynlenonheap -qalias=nostd EXTRA_LIBS = %{LHBDT} %ifdef %{64} FOPTIMIZE = -q64 %endif 435.gromacs=peak=default=default: # Fortran & C Benchmark OPTIMIZE = %{O4} -qsimd EXTRA_LIBS = %{LHLIB} LDCFLAGS = -Wl,-q LDFFLAGS = -Wl,-q PASS1_FFLAGS = -qpdf1 PASS1_CFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_FFLAGS = -qpdf2 PASS2_CFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 fdo_pre2 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run2 = $command fdo_post2 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -nodp ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} COPTIMIZE = -q64 FOPTIMIZE = -q64 %endif 436.cactusADM=peak=default=default: # Fortran & C Benchmark copies = 192 %define 64 OPTIMIZE = %{O4} -q64 -qsimd -qnostrict FOPTIMIZE = -qsmallstack=dynlenonheap -qalias=nostd EXTRA_LIBS = %{LHLIB} LDCFLAGS = -Wl,-q LDFFLAGS = -Wl,-q fdo_pre1 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run1 = $command fdo_post1 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -nodp ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} FPORTABILITY = -qfixed -qextname FPPPORTABILITY = -DSPEC_CPU_LP64 %else FPORTABILITY = -qfixed -qextname %endif %undef 64 437.leslie3d=peak=default=default: # Fortran Benchmark copies = 96 OPTIMIZE = %{O5} EXTRA_LIBS = %{LHLIB} #LDFFLAGS = -Wl,-q #fdo_pre1 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe} #fdo_run1 = $command #fdo_post1 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O3 -lu -1 -nodp -sdp 9 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} FOPTIMIZE = -q64 %endif #notes_peak_fdpr_437_1 = fdpr binary optimization tool used for 437.leslie3d #notes_peak_fdpr_437_2 = with options -O3 -lu -1 -nodp -sdp 9 444.namd=peak=default=default: # C++ Benchmark OPTIMIZE = %{O5} EXTRA_LIBS = %{LHLIB} LDCXXFLAGS = -Wl,-q PASS1_CXXFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_CXXFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 fdo_pre2 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run2 = $command fdo_post2 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O3 -lu -1 -nodp -sdp 9 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} CXXOPTIMIZE = -q64 %endif 447.dealII=peak=default=default: # C++ Benchmark OPTIMIZE = %{O4} -qrtti EXTRA_CXXFLAGS = %{IPAC} -qcpp_stdinc=/root/stdcxx421/include/ansi:/root/stdcxx421/include:/opt/ibmcmp/vacpp/11.1/include EXTRA_CXXLIBS = -L/root/stdcxx421/lib -R/root/stdcxx421/lib -lstd8d EXTRA_LIBS = -lsmartheap %{LHLIB} %ifdef %{64} CXXOPTIMIZE = -q64 %endif 450.soplex=peak=default=default: # C++ Benchmark OPTIMIZE = %{O3} EXTRA_LIBS = %{LHLIB} LDCXXFLAGS = -Wl,-q fdo_pre1 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run1 = $command fdo_post1 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -nodp ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} CXXOPTIMIZE = -q64 %endif 453.povray=peak=default=default: # C++ Benchmark %define 64 OPTIMIZE = %{O4} -qsimd EXTRA_LIBS = -lsmartheap64 LDCXXFLAGS = -Wl,-q PASS1_CXXFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_CXXFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 %ifdef %{64} CXXPORTABILITY = -DSPEC_CPU_LP64 CXXOPTIMIZE = -q64 %endif %undef 64 454.calculix=peak=default=default: # Fortran & C Benchmark OPTIMIZE = %{O5} EXTRA_LIBS = %{LHLIB} PASS1_FFLAGS = -qpdf1 PASS1_CFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_FFLAGS = -qpdf2 PASS2_CFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 %ifdef %{64} FOPTIMIZE = -q64 COPTIMIZE = -q64 %endif 459.GemsFDTD=peak=default=default: # Fortran Benchmark basepeak = 1 OPTIMIZE = %{O4} -qsimd EXTRA_LIBS = %{LHLIB} %ifdef %{64} FOPTIMIZE = -q64 %endif 465.tonto=peak=default=default: # Fortran Benchmark OPTIMIZE = %{O5} -qsimd EXTRA_LIBS = %{LHLIB} PASS1_FFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_FFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 LDFFLAGS = -Wl,-q fdo_pre2 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run2 = $command fdo_post2 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} FOPTIMIZE = -q64 %endif notes_peak_fdpr_465_000= 465.tonto notes_peak_fdpr_465_005= with options -O4 470.lbm=peak=default=default: # C Benchmark OPTIMIZE = %{O5} EXTRA_LIBS = %{LHLIB} LDCFLAGS = -Wl,-q fdo_pre0 = ${CC_PATH}/cleanpdf PASS1_CFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_CFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 fdo_pre2 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run2 = $command fdo_post2 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -kr -O4 -sdp 9 -vrox -m power7 ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} COPTIMIZE = -q64 %endif 481.wrf=peak=default=default: # Fortran & C-for netCDF Benchmark %define 64 OPTIMIZE = %{O3} EXTRA_LIBS = %{LHLIB} %ifdef %{64} COPTIMIZE = -q64 FOPTIMIZE = -q64 %endif %undef 64 482.sphinx3=peak=default=default: # C only Benchmark OPTIMIZE = %{O4} EXTRA_LIBS = %{LHLIB} LDCFLAGS = -Wl,-q PASS1_CFLAGS = -qpdf1 PASS1_LDFLAGS = -qpdf1 PASS2_CFLAGS = -qpdf2 PASS2_LDFLAGS = -qpdf2 fdo_pre2 = cp ${baseexe} ${baseexe}.orig ; /opt/bin/fdprpro -a instr %{FDPRINT} ${baseexe}; cp ${baseexe}.instr ${baseexe} fdo_run2 = $command fdo_post2 = cp ${baseexe}.orig ${baseexe} ; /opt/bin/fdprpro -a opt -f ${baseexe}.nprof -O4 -nodp ${baseexe} ; cp ${baseexe}.fdpr ${baseexe} %ifdef %{64} COPTIMIZE = -q64 %endif 998.specrand=peak=default=default: # C only Benchmark - Must run, but not reported unless fails OPTIMIZE = %{O5} # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. 470.lbm: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 default: test_sponsor = IBM Corporation tester = IBM Corporation notes_000 =447.dealII (peak): "apache_stdcxx_4_2_1" src.alt was used. notes_005 =447.dealII (base): "apache_stdcxx_4_2_1" src.alt was used. notes_010 = hw_cpu_char000 = Intelligent Energy Optimization enabled, hw_cpu_char001 = up to 3.780 GHz notes_peak_fdpr_470_000 = 470.lbm notes_peak_fdpr_470_005 = with options -kr -O4 -sdp 9 -vrox -m power7 notes_peak_fdpr_444_000 = 444.namd notes_peak_fdpr_444_005 = with options -O3 -lu -1 -nodp -sdp 9 notes_submit_000 = The config file option 'submit' was used notes_submit_005 = to assign benchmark copy to specific kernel thread using notes_submit_010 = the "numactl" command (see flags file for details). notes_comp_iler_000=C/C++ compiler updated to July2011 PTF notes_comp_iler_005= Version 11.01.0000.0003 notes_comp_iler_010=Fortran compiler updated to July2011 PTF notes_comp_iler_015= Version 13.01.0000.0003 notes_os_000 =ulimit -s (stack) set to 2097152 notes_os_005 =Large pages reserved as follows by root user: notes_os_010 = echo 25728 > /proc/sys/vm/nr_hugepages notes_os_015 =The following environment varibles were set before the runspec command: notes_os_020 = export XLFRTEOPTS=intrinthds=1 notes_os_025 = export HUGETLB_VERBOSE=0 notes_os_030 = export HUGETLB_MORECORE=yes notes_os_035 = export HUGETLB_ELFMAP=RW