# Invocation command line:
# /root/cpu2006-1.1/bin/runspec --rate 16 -c cpu2006.1.1.ic12.linux64.sse42.rate.03jan2011.cfg --define smt --define cores=8 --define physicalfirst --flagsurl=Intel-ic12.0-linux64-revB.xml,Intel-Linux64-Platform.xml --parallel_test=1 -T all -o all fp
# output_root was not used for this run
############################################################################
############################################################################
# This is a sample config file. It was tested with:
#
#      Compiler name/version:       Intel Compiler 12.0
#      Operating system version:    64-Bit RedHat Enterprise Linux64 5.5
#      Hardware:                    Intel processors supporting SSE4.2
#
############################################################################
# SPEC CPU2006 Intel Linux64 config file
# Oct 2010 IC 12.0 Linux64
############################################################################
action      = validate
tune        = base,peak
ext         = cpu2006.1.1.ic12.linux64.sse42.rate.03jan2011
PATHSEP     = /
check_md5=1
reportable=1
bench_post_setup=sync
parallel_test=0
mean_anyway=1

#
# These are listed as benchmark-tuning-extension-machine
#
int=default=default=default:
CC=  icc  -m32
CXX= icpc -m32
OBJ = .o
SMARTHEAP32_DIR = /smartheap
SMARTHEAP64_DIR = /smartheap
LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT

fp=default=default=default:
CC=  icc   -m64
CXX= icpc  -m64
FC=  ifort -m64
OBJ = .o

437.leslie3d,453.povray,454.calculix,459.GemsFDTD,465.tonto=peak=default:
LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT
PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT
PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT

# For UP systems, we need to know if the processors are ordered across cores first or in order
# If across cores, processors 0, 1, 2 and 3 are on distinct physical cores
# Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores

default:
submit       = numactl --localalloc --physcpubind=$SPECCOPYNUM $command

%ifdef %{no-numa}
submit       = taskset -c $SPECCOPYNUM $command
%endif

####################################################################
# Compiler options
# for Nehalem use -xSSE4.2
# for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3
####################################################################
default:
SSE          = -xSSE4.2
FASTNOSTATIC =  $(SSE) -ipo -O3 -no-prec-div
FAST =  $(SSE) -ipo -O3 -no-prec-div  -static

################################################################
#
# portability & libraries
#
#################### Portability Flags and Notes ############################

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

fp=default:
PORTABILITY = -DSPEC_CPU_LP64

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX


################################################################
# Tuning Flags
################################################################
#
# Base tuning default optimization
# Feedback directed optimization not allowed in baseline for CPU2006
# However there is no limit on the number of flags as long as the same
# flags are used in the same order for all benchmarks of a given language

471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP32_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    $(FASTNOSTATIC)  -opt-prefetch
CXXOPTIMIZE=  $(FASTNOSTATIC)  -opt-prefetch

fp=base=default=default:
OPTIMIZE=     $(FAST)
COPTIMIZE=    $(FAST)  -ansi-alias
CXXOPTIMIZE=  $(FAST)  -ansi-alias

################################################################
# Peak Tuning Flags int 2006 fast
################################################################
int=peak=default:
COPTIMIZE=         -ansi-alias -auto-ilp32
CXXOPTIMIZE=       -ansi-alias
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS   = -prof-gen
PASS2_CXXFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCXXFLAGS = -prof-gen
PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use

400.perlbench=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64
COPTIMIZE=
PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT
PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT

401.bzip2=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -opt-prefetch  -auto-ilp32 -ansi-alias
PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT
PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT

403.gcc=peak=default:
COPTIMIZE = $(FASTNOSTATIC)
feedback=0

429.mcf=peak=default:
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

445.gobmk=peak=default:
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(SSE) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(SSE) -prof-use

456.hmmer=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE=  $(FASTNOSTATIC) -unroll2  -auto-ilp32
feedback=no
LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

458.sjeng=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -unroll4 -auto-ilp32
PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT
PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT

462.libquantum=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX
basepeak=yes
feedback=no
LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT

464.h264ref=peak=default:
COPTIMIZE=  -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE=  -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
basepeak=yes

483.xalancbmk=peak=default:
basepeak=yes

################################################################
# Peak Tuning Flags for FP
################################################################
fp=peak=default:
COPTIMIZE=       -auto-ilp32
CXXOPTIMIZE=     -auto-ilp32
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use
PASS1_FFLAGS =   -prof-gen
PASS2_FFLAGS =   $(FASTNOSTATIC) -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  $(FASTNOSTATIC) -prof-use

410.bwaves=peak=default:
OPTIMIZE= -static
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

416.gamess=peak=default:
OPTIMIZE= -unroll2 -inline-level=0  -scalar-rep- -static
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

433.milc=peak=default:
OPTIMIZE= -static

434.zeusmp=peak=default:
basepeak=yes
feedback=0

435.gromacs=peak=default:
OPTIMIZE= -opt-prefetch -static

436.cactusADM=peak=default:
basepeak=yes

437.leslie3d=peak=default:
OPTIMIZE=     $(FASTNOSTATIC)
feedback=no
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

444.namd=peak=default:
CXXOPTIMIZE= -fno-alias -auto-ilp32

447.dealII=peak=default:
OPTIMIZE= -static

450.soplex=peak=default:
PORTABILITY =
CXX= icpc -m32
OPTIMIZE= -opt-malloc-options=3
CXXOPTIMIZE=
PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT
PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

453.povray=peak=default:
CXXOPTIMIZE= -unroll4  -ansi-alias

454.calculix=peak=default:
basepeak=yes

459.GemsFDTD=peak=default:
basepeak=yes
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

465.tonto=peak=default:
OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3

470.lbm=peak=default:
OPTIMIZE= -opt-malloc-options=3 -ansi-alias -opt-prefetch -static
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

481.wrf=peak=default:
basepeak=yes
feedback=0

482.sphinx3=peak=default:
PORTABILITY=
CC= icc -m32
OPTIMIZE= $(FASTNOSTATIC)
COPTIMIZE= -unroll2
feedback=no

#################################################################
# (Edit this to match your system)
#################################################################

default=default=default=default:
license_num      = 55
test_sponsor     = Dell Inc.
hw_avail         = Mar-2010
sw_avail         = Jan-2011
tester           = Dell Inc.
hw_cpu_name      = Intel Xeon E5620
hw_cpu_char      = Intel Turbo Boost Technology up to 2.66 GHz
hw_cpu_mhz       = 2400
hw_disk          = 1 x 146 GB 15000 RPM SAS
hw_fpu           = Integrated
hw_memory000     = 48 GB (12 x 4 GB 2Rx4 PC3-10600R-9, ECC, running
hw_memory001 = at
hw_memory002 = 1066 MHz)
hw_model         = PowerEdge R710 (Intel Xeon E5620, 2.40 GHz)
hw_ncpuorder     = 1,2 chips
hw_ncores        = 8
hw_nchips        = 2
hw_ncoresperchip = 4
hw_nthreadspercore = 2
hw_other         = None
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 256 KB I+D on chip per core
hw_tcache        = 12 MB I+D on chip per chip
hw_ocache        = None
hw_vendor        = Dell Inc.
prepared_by      = Dell Inc.
sw_file          = ext3
sw_os000         = SUSE Linux Enterprise Server 11 SP1 (x86_64),
sw_os001 = Kernel 2.6.32.12-0.7-default
sw_state         = Run level 3 (multi-user)
notes_plat_000   = BIOS Settings:
notes_plat_005   = Power Management = Maximum Performance (Default = Active Power Controller)
#notes_plat_010   = Data Reuse = Disabled (Default = Enabled)
#notes_plat_015   = Logical Processor = Disabled (Default = Enabled)
notes_submit_000 = numactl was used to bind copies to the cores
%ifdef %{no-numa}
notes_submit_000 = taskset was used to bind copies to the cores
%endif
notes_os_000     = 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run
notes_os_005     =
#notes_os_010     = Large pages were not enabled for this run
notes_os_010     = 'mount -t hugetlbfs nodev /mnt/hugepages' was used to enable large pages
notes_os_015     = echo 7200 > /proc/sys/vm/nr_hugepages
notes_os_020     = export HUGETLB_MORECORE=yes
notes_os_025     = export LD_PRELOAD=/usr/lib64/libhugetlbfs.so

int=default=default=default:
sw_compiler001   = Intel C++ Compiler XE for applications running on IA-32
sw_compiler002   = Version 12.0.1.116 Build 20101116
sw_base_ptrsize  = 32-bit
sw_peak_ptrsize  = 32/64-bit
sw_other001      = Microquill SmartHeap V9.01
sw_other002      = Binaries compiled on RHEL5.5 with binutils-2.17.50.0.6-14.el5

fp=default=default=default:
sw_compiler000   = Intel C++ and Fortran Intel 64 Compiler XE for
sw_compiler001 = applications running on Intel 64
sw_compiler002   = Version 12.0.1.116 Build 20101116
sw_base_ptrsize  = 64-bit
sw_peak_ptrsize  = 32/64-bit
sw_other000      = None




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.

447.dealII:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


435.gromacs:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


416.gamess:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1

default:
flagsurl000 = http://www.spec.org/cpu2006/flags/Intel-ic12.0-linux64-revB.xml
flagsurl001 = http://www.spec.org/cpu2006/flags/Intel-Linux64-Platform.20110524.00.xml
notes_000 = The Dell PowerEdge R710 and
notes_005 = the Bull NovaScale R460 F2 models are electronically equivalent.
notes_010 = The results have been measured on a Dell PowerEdge R710 model
notes_015 = Binaries were compiled on RHEL5.5