CPU2006 license: | 11 | Test date: | May-2011 |
---|---|---|---|
Test sponsor: | IBM Corporation | Hardware Availability: | May-2011 |
Tested by: | IBM Corporation | Software Availability: | Jan-2011 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E7-4807 |
CPU Characteristics: | |
CPU MHz: | 1867 |
FPU: | Integrated |
CPU(s) enabled: | 12 cores, 2 chips, 6 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 18 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 128 GB (16 x 8 GB 4Rx8 PC3-8500R-7, ECC, running at 800 MHz) |
Disk Subsystem: | 2 x 50 GB SSD, RAID 0 |
Other Hardware: | None |
Software | |
---|---|
Operating System: | SUSE Linux Enterprise Server 11 SP1 (x86_64), Kernel 2.6.32.12-0.7-default |
Compiler: | Intel C++ Compiler XE for applications running on IA-32 Version 12.0.1.116 Build 20101116 |
Auto Parallel: | No |
File System: | ext3 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V9.01 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 24 | 1270 | 185 | 1266 | 185 | 1265 | 185 | 24 | 1015 | 231 | 1016 | 231 | 1008 | 233 |
401.bzip2 | 24 | 1715 | 135 | 1717 | 135 | 1717 | 135 | 24 | 1546 | 150 | 1546 | 150 | 1550 | 149 |
403.gcc | 24 | 967 | 200 | 969 | 199 | 961 | 201 | 24 | 982 | 197 | 980 | 197 | 977 | 198 |
429.mcf | 24 | 867 | 253 | 856 | 256 | 860 | 254 | 24 | 817 | 268 | 827 | 265 | 820 | 267 |
445.gobmk | 24 | 1190 | 212 | 1192 | 211 | 1192 | 211 | 24 | 1130 | 223 | 1127 | 223 | 1131 | 223 |
456.hmmer | 24 | 758 | 295 | 752 | 298 | 754 | 297 | 24 | 560 | 400 | 555 | 403 | 555 | 403 |
458.sjeng | 24 | 1438 | 202 | 1439 | 202 | 1438 | 202 | 24 | 1320 | 220 | 1320 | 220 | 1321 | 220 |
462.libquantum | 24 | 441 | 1130 | 440 | 1130 | 441 | 1130 | 24 | 441 | 1130 | 440 | 1130 | 441 | 1130 |
464.h264ref | 24 | 1868 | 284 | 1861 | 285 | 1877 | 283 | 24 | 1826 | 291 | 1817 | 292 | 1866 | 285 |
471.omnetpp | 24 | 1017 | 147 | 1019 | 147 | 1020 | 147 | 24 | 930 | 161 | 931 | 161 | 930 | 161 |
473.astar | 24 | 1136 | 148 | 1143 | 147 | 1138 | 148 | 24 | 1136 | 148 | 1143 | 147 | 1138 | 148 |
483.xalancbmk | 24 | 706 | 235 | 704 | 235 | 705 | 235 | 24 | 706 | 235 | 704 | 235 | 705 | 235 |
The config file option 'submit' was used. numactl was used to bind copies to the cores
'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run echo 1 > /proc/sys/vm/zone_reclaim_mode 'mount -t hugetlbfs nodev /mnt/hugepages' was used to enable large pages echo 15600 > /proc/sys/vm/nr_hugepages export HUGETLB_MORECORE=yes export LD_PRELOAD=/usr/lib64/libhugetlbfs.so
BIOS Settings: Turbo Boost Power Optimization set to Traditional
Binaries were compiled on RHEL5.5
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -Wl,-z,muldefs -L/smartheap -lsmartheap -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
471.omnetpp: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/smartheap -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |