# Invocation command line:
# /cpu2006/bin/runspec -c fsc-ic101-rate-int -T all --input ref -n 3 --rate 2 --machine XeonUP2cores -o all int
# output_root was not used for this run
############################################################################
##########################################################
# SPEC CPU2006 v1.0 Intel SLES10 x64 config file         #
# Intel Compiler 10.1 for Linux Intel IA32 (mostly)      #
# Nov. 20 2007                                           #
##########################################################

action      = validate
tune        = base
ext         = cpu2006.10.ic101.20071119.rate
PATHSEP     = /
check_md5   = 1
reportable  = 1
mean_anyway = 1

flagsurl000= http://www.spec.org/cpu2006/flags/Intel-ic10-ia32-intel64-linux-flags.20090713.01.xml

#include: SUT.inc
#  ----- Begin inclusion of 'SUT.inc'
############################################################################
# To avoid conflicts in the numbering of the notes,
# please use only 900 and higher numbers.

# Use of thread-binding controlled by macro

%ifdef %{binding}
use_submit_for_speed=1
submit = /usr/bin/taskset -c $SPECCOPYNUM $command

# submit0 = MYMASK=\$((1<<$SPECCOPYNUM))
# submit1 = /usr/bin/taskset \$MYMASK $command

# submit= MYMASK=\$((1<<\$SPECCOPYNUM)) ; /usr/bin/taskset \$MYMASK $command
# submit=MYMASK=`printf '0x%x' \$((1<<$SPECCOPYNUM))` ; /usr/bin/taskset \$MYMASK $command
notes915=taskset has been used to bind processes to CPUs
%endif

################################################################
# System information
# If some remarks about BIOS or Firmware are needed, place them here.
################################################################

default=default=default=default:
notes_os_000= 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run
notes_os_005= OMP_NUM_THREADS set to number of cores (default)
notes_plat_000= BIOS configuration:
# notes_plat015= Enhanced Speedstep Technology = Disable
notes_plat_005= Hardware Prefetch = Enable, Adjacent Sector Prefetch = Disable
# notes_plat020= Hardware Prefetch = Enable, Adjacent Sector Prefetch = Enable

################################################################
# About Fujitsu Siemens Computers
################################################################

default=default=default=default:
notes_015=
notes_020= For information about Fujitsu Siemens Computers please see:
notes_025= http://www.fujitsu-siemens.com

# Blank line at the end
notes_030=

################################################################
# Description Hardware and Software
################################################################

default=default=default=default:
hw_vendor          = Fujitsu Siemens Computers
hw_model000        = PRIMERGY RX100 S5, Intel Core 2 Duo E4600,
hw_model001 = 2.40 GHz
hw_cpu_name        = Intel Core 2 Duo E4600
hw_cpu_char        = 800 MHz system bus
hw_cpu_mhz         = 2400
hw_fpu             = Integrated
#
hw_nchips          = 1
hw_ncores          = 2
hw_ncoresperchip   = 2
hw_nthreadspercore = 1
#
hw_ncpuorder       = 1 chip
hw_pcache          = 32 KB I + 32 KB D on chip per core
hw_scache          = 2 MB I+D on chip per chip
# hw_scache          = 6 MB I+D on chip per chip, 3 MB shared / 2 cores
hw_tcache          = None
hw_ocache          = None
hw_memory          = 8 GB (4x2 GB PC2-6400E, 2 rank, CL 6-6-6, ECC)
hw_disk            = 1x SATA, 500 GB, 7200 rpm
hw_other           = None
#
sw_file            = ext2
sw_state           = Multi-User Run Level 3
#
license_num        = 22
test_sponsor       = Fujitsu Siemens Computers
tester             = Fujitsu Siemens Computers
test_date          = Mar-2008
hw_avail           = Apr-2008
prepared_by        = Fujitsu Siemens Computers
# ---- End inclusion of '/cpu2006/config/SUT.inc'

default=default=default=default:
CC  = icc
CXX = icpc
FC  = ifort
OBJ = .o
COMPILER_DIR_CC64 = /opt/intel/cce/10.1.008
CC64 = $(COMPILER_DIR_CC64)/bin/icc -L$(COMPILER_DIR_CC64)/lib -I$(COMPILER_DIR_CC64)/include
CXX64 = $(COMPILER_DIR_CC64)/bin/icpc -L$(COMPILER_DIR_CC64)/lib -I$(COMPILER_DIR_CC64)/include
SMARTHEAP_DIR = /opt/SmartHeap_8.1/lib

###########################
# portability & libraries #
###########################

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

fp=default:
PORTABILITY = -DSPEC_CPU_LP64

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX

#########################
# Baseline Tuning Flags #
#########################

all_cpp=base=default=default:
EXTRA_LIBS=  -L$(SMARTHEAP_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    -fast -inline-calloc -opt-malloc-options=3
CXXOPTIMIZE=  -xT -ipo -O3 -no-prec-div 

fp=base=default=default:
OPTIMIZE=    -fast 

#####################
# Peak Tuning Flags #
#####################

int=peak=default:
COPTIMIZE=       -fast 
CXXOPTIMIZE=     -xT -ipo -O3 -no-prec-div 
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  -prof-use

fp=peak=default:
OPTIMIZE=    -fast
COPTIMIZE=   -auto-ilp32
CXXOPTIMIZE= -auto-ilp32
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = -prof-use
PASS1_FFLAGS =   -prof-gen
PASS2_FFLAGS =   -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  -prof-use

all_cpp=peak=default=default:
EXTRA_LIBS=  -L$(SMARTHEAP_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

400.perlbench=peak=default:
COPTIMIZE= -fast -ansi-alias -prefetch

401.bzip2=peak=default:
CC = $(CC64)
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -fast -prefetch

403.gcc=peak=default:
COPTIMIZE = -fast -inline-calloc -opt-malloc-options=3
feedback=0

429.mcf=peak=default:
COPTIMIZE= -fast -prefetch
feedback=0

445.gobmk=peak=default:
COPTIMIZE= -xT -O2 -ipo -no-prec-div -ansi-alias

456.hmmer=peak=default:
CC = $(CC64)
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -fast -unroll2 -ansi-alias -opt-multi-version-aggressive
feedback=no

458.sjeng=peak=default:
COPTIMIZE= -fast -unroll4

462.libquantum=peak=default:
COPTIMIZE= -fast -unroll4 -Ob0 -prefetch -opt-streaming-stores always -vec-guard-write -opt-malloc-options=3 -parallel -par-runtime-control
feedback=no
copies=1
submit =

464.h264ref=peak=default:
COPTIMIZE= -fast -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE= -xT -O3 -ipo -no-prec-div -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
CXXOPTIMIZE= -xT -O3 -ipo -no-prec-div -ansi-alias -opt-ra-region-strategy=routine

483.xalancbmk=peak=default:
basepeak=yes

410.bwaves=peak=default:
OPTIMIZE=    -fast -prefetch
feedback=0

410.bwaves=peak=default=bensleydp8cores:
copies=4

416.gamess=peak=default:
OPTIMIZE= -fast -unroll2 -Ob0 -ansi-alias -scalar-rep-

433.milc=peak=default:
OPTIMIZE= -fast -fno-alias

435.gromacs=peak=default:
OPTIMIZE=    -fast -prefetch

436.cactusADM=peak=default:
OPTIMIZE= -fast -unroll2 -prefetch -parallel
copies=1

437.leslie3d=peak=default:
PORTABILITY =
FC= /home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070725/Linux32/bin/ifort -L/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070725/Linux32/lib -I/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070725/Linux32/include
OPTIMIZE=    -fast -prefetch -opt-malloc-options=3

444.namd=peak=default:
CXXOPTIMIZE= -fast -fno-alias -auto-ilp32

447.dealII=peak=default:
CXXOPTIMIZE= -fast -unroll2 -ansi-alias -scalar-rep-

450.soplex=peak=default:
PORTABILITY =
CXX= /home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070725/Linux32/bin/icpc -L/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070725/Linux32/lib -I/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070725/Linux32/include
OPTIMIZE= -fast -opt-malloc-options=3
CXXOPTIMIZE=

453.povray=peak=default:
CXXOPTIMIZE= -fast -unroll4 -ansi-alias

454.calculix=peak=default:
OPTIMIZE= -fast -unroll-aggressive
feedback=0

459.GemsFDTD=peak=default:
OPTIMIZE= -fast -unroll2 -Ob0 -prefetch

465.tonto=peak=default:
OPTIMIZE= -fast -unroll4 -auto

470.lbm=peak=default:
PORTABILITY =
CC= /home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070725/Linux32/bin/icc -L/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070725/Linux32/lib -I/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070725/Linux32/include
COPTIMIZE= -unroll2 -scalar-rep- -prefetch -opt-malloc-options=3

470.lbm=peak=default=bensleydp8cores:
copies=4

470.lbm=peak=default=tgtn4p16cores:
copies=8

481.wrf=peak=default:
OPTIMIZE= -fast
feedback=0

482.sphinx3=peak=default:
PORTABILITY =
CC= /home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070725/Linux32/bin/icc -L/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070725/Linux32/lib -I/home/cmplr/usr3/alrahate/compilers/ic10.1mainline/20070725/Linux32/include
COPTIMIZE= -unroll2
feedback=no

482.sphinx3=peak=default=bensleydp8cores:
copies=4

482.sphinx3=peak=default=tgtn4p16cores:
copies=8

#########################
# Used Compilers and OS #
#########################

default=default=default=default:
sw_os000         = SUSE Linux Enterprise Server 10 (x86_64) SP1,
sw_os001         = Kernel 2.6.16.46-0.12-smp

int=default=default=default:
sw_compiler000   = Intel C++ Compiler for Linux32 and Linux64,
sw_compiler001   = Version 10.1, Build 20070913

int=default=default=default:
sw_other000      = MicroQuill SmartHeap Library, Version 8.1
sw_other001      = binutils-2.17.50.0.5-0.1.x86_64
sw_auto_parallel = Yes
sw_avail         = Nov-2007
sw_base_ptrsize  = 32-bit
sw_peak_ptrsize  = 32/64-bit
# sw_peak_ptrsize = Not Applicable

int=peak=default=default:
notes_000= All binaries were built with 32-bit Intel compiler except:
notes_005= 401.bzip2 and 456.hmmer in peak were built with 64-bit Intel
notes_010= compiler by changing the path for include and library files.

fp=default=default=default:
sw_compiler001   = Intel C++ and Fortran Compiler
sw_compiler002   = for Linux32 and Linux64
sw_compiler003   = Version 10.1 - Build 20070725
sw_other         = None
sw_auto_parallel = Yes
sw_avail         = Nov-2007
sw_base_ptrsize  = 64-bit
sw_peak_ptrsize  = 32/64-bit
# sw_peak_ptrsize = Not Applicable