# Invocation command line:
# /data1/cpu2006.1.0/bin/runspec -c intel-fpr.cfg --rate 8 -T base,peak -o asc --reportable fp
# output_root was not used for this run
############################################################################
##########################################################
# SPEC CPU2006 v1.0 Intel SLES10 x64 config file         #
# Intel Compiler 10.1 for Linux Intel EM64T (mostly)     #
# Nov. 20 2007                                           #
##########################################################

action      = validate
tune        = base
ext         = cpu2006.10.ic101.20071119.speed
PATHSEP     = /
check_md5=1
reportable=1
mean_anyway = 1

flagsurl000= http://www.spec.org/cpu2006/flags/Intel-ic10.1-FP-intel64-linux-flags.20090714.19.xml

############################################################################
	# File to be included into config file for SPEC CPU2000

# This include file specifies the "System Under Test" (Hardware,
# OS, BIOS, etc.)
# Any information about the binaries is elsewhere.

# To avoid conflicts in the numbering of the notes,
# please use only 900 and higher numbers.

# Use of thread-binding controlled by macro

%ifdef %{binding}
use_submit_for_speed=1
submit = /usr/bin/taskset -c $SPECCOPYNUM $command

# submit0 = MYMASK=\$((1<<$SPECCOPYNUM))
# submit1 = /usr/bin/taskset \$MYMASK $command

# submit= MYMASK=\$((1<<\$SPECCOPYNUM)) ; /usr/bin/taskset \$MYMASK $command
# submit=MYMASK=`printf '0x%x' \$((1<<$SPECCOPYNUM))` ; /usr/bin/taskset \$MYMASK $command
notes915=taskset has been used to bind processes to CPUs
%endif

################################################################
# System information
# If some remarks about BIOS or Firmware are needed, place them here.
################################################################

int=default=default=default:
notes903= All binaries were built with 32-bit Intel compiler except:
notes904= 401.bzip2 and 456.hmmer in peak were built with 64-bit Intel
notes905= compiler by changing the path for include and library files.

fp=default=default=default:
notes_000= All benchmarks were compiled in 64-bit mode except 450.soplex,
notes_005= 470.lbm and 482.sphinx3 for peak were compiled in 32-bit mode

default=default=default=default:
notes_plat_000= BIOS configuration:
notes_plat_005= Hardware Prefetch = Disable; Adjacent Sector Prefetch = Disable

# notes_plat020= Hardware Prefetch = Disable, Adjacent Sector Prefetch = Disable
# notes_plat030= SnoopFilter = Enable


################################################################
# Description Hardware and Software
################################################################

default=default=default=default:
hw_vendor = Sun Microsystems
hw_model = Sun Fire X4150
hw_cpu_name = Intel Xeon X5460
hw_cpu_char = 3.16 GHz, 2x6 MB L2 shared, 1333 MHz system bus
hw_cpu_mhz = 3166
hw_fpu = Integrated
#
hw_nchips = 2
hw_ncores = 8
hw_ncoresperchip = 4
hw_nthreadspercore = 1
#
hw_ncpuorder = 1,2 (order by number of chips)
hw_pcache = 32 KB I + 32 KB D on chip per core
hw_scache = 12 MB I+D on chip per chip, 6 MB shared / 2 cores
hw_tcache = None
hw_ocache = None
hw_memory000= 16 GB (8x2GB DDR2 PC2-5300F 2rank CAS 5-5-5
hw_memory001 = with ECC)
hw_disk = SAS, 72 GB, 10K RPM
hw_other = None

sw_file=ReiserFS
sw_state=Multi-user, run level 3

license_num = 6
test_sponsor = Sun Microsystems
tester = Sun Microsystems
test_date = Jan-2008
hw_avail = Feb-2008
prepared_by = Rajaram.Gnanakumar@sun.com
config =

#
# These are listed as benchmark-tuning-extension-machine
#
default=default=default=default:
CC  = icc
CXX = icpc
FC=ifort
OBJ = .o

SMARTHEAP_DIR = /opt/SmartHeap_8.1/lib

# 32-bit compilers for selected benchmarks
#
COMPILER_DIR_CC32 = /opt/intel/cc/10.1.008
CC32 = $(COMPILER_DIR_CC32)/bin/icc -L$(COMPILER_DIR_CC32)/lib -I$(COMPILER_DIR_CC32)/include
CXX32 = $(COMPILER_DIR_CC32)/bin/icpc -L$(COMPILER_DIR_CC32)/lib -I$(COMPILER_DIR_CC32)/include

sw_base_ptrsize = 64-bit
sw_peak_ptrsize = 32/64-bit

int=base=default:
sw_base_ptrsize = 32-bit

################################################################
#
# portability & libraries
#
#################### Portability Flags and Notes ############################

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

fp=default:
PORTABILITY = -DSPEC_CPU_LP64

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX

################################################################
# Tuning Flags
################################################################
# Base tuning default optimization
# Feedback directed optimization not allowed in baseline for CPU2006
# However there is no limit on the number of flags as long as the same 
# flags are used in the same order for all benchmarks of a given language
################################################################

471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    -fast -vec-guard-write -parallel -par-runtime-control
CXXOPTIMIZE=  -xT -ipo -O3 -no-prec-div 

fp=base=default=default:
OPTIMIZE=    -fast 

################################################################
# Peak Tuning Flags int 2006 fast
################################################################
int=peak=default:
COPTIMIZE=       -fast -auto-ilp32 
CXXOPTIMIZE=     -xT -ipo -O3 -no-prec-div 
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  -prof-use

400.perlbench=peak=default:
COPTIMIZE= -fast -ansi-alias -prefetch

401.bzip2=peak=default:
CC= /opt/intel/cce/10.1.008/bin/icc -L/opt/intel/cce/10.1.008/lib -I/opt/intel/cce/10.1.008/include
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -fast -prefetch -auto-ilp32

403.gcc=peak=default:
COPTIMIZE = -fast -inline-calloc -opt-malloc-options=3
feedback=0

429.mcf=peak=default:
COPTIMIZE= -fast -prefetch 
feedback=0

445.gobmk=peak=default:
COPTIMIZE= -xT -O2 -ipo -no-prec-div -ansi-alias

456.hmmer=peak=default:
CC= /opt/intel/cce/10.1.008/bin/icc -L/opt/intel/cce/10.1.008/lib -I/opt/intel/cce/10.1.008/include
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -fast -unroll2 -ansi-alias -opt-multi-version-aggressive -auto-ilp32
feedback=0

458.sjeng=peak=default:
COPTIMIZE= -fast -unroll4

462.libquantum=peak=default:
COPTIMIZE= -fast -unroll4 -Ob0 -prefetch -opt-streaming-stores always -vec-guard-write -opt-malloc-options=3 -parallel -par-runtime-control
feedback=no

464.h264ref=peak=default:
COPTIMIZE= -fast -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE= -xT -O3 -ipo -no-prec-div -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
CXXOPTIMIZE= -xT -O3 -ipo -no-prec-div -ansi-alias -opt-ra-region-strategy=routine

483.xalancbmk=peak=default:
basepeak=yes

################################################################
# Peak Tuning Flags for FP
################################################################
fp=peak=default:
OPTIMIZE=    -fast
COPTIMIZE=   -auto-ilp32
CXXOPTIMIZE= -auto-ilp32
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = -prof-use
PASS1_FFLAGS =   -prof-gen
PASS2_FFLAGS =   -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  -prof-use

410.bwaves=peak=default:
copies=4
OPTIMIZE=    -fast -prefetch 
feedback=0

416.gamess=peak=default:
OPTIMIZE= -fast -unroll2 -Ob0 -ansi-alias -scalar-rep-

433.milc=peak=default:
OPTIMIZE= -fast -fno-alias

435.gromacs=peak=default:
OPTIMIZE=    -fast -prefetch

436.cactusADM=peak=default:
copies=1
OPTIMIZE= -fast -unroll2 -prefetch -parallel

437.leslie3d=peak=default:
copies=4
basepeak=yes

444.namd=peak=default:
CXXOPTIMIZE= -fast -fno-alias -auto-ilp32

447.dealII=peak=default:
CXXOPTIMIZE= -fast -unroll2 -ansi-alias -scalar-rep-

450.soplex=peak=default:
PORTABILITY =
CXX = $(CXX32)
OPTIMIZE= -fast -opt-malloc-options=3
CXXOPTIMIZE=

453.povray=peak=default:
CXXOPTIMIZE= -fast -unroll4 -ansi-alias

454.calculix=peak=default:
OPTIMIZE= -fast -unroll-aggressive
feedback=0

459.GemsFDTD=peak=default:
OPTIMIZE= -fast -unroll2 -Ob0 -prefetch 

465.tonto=peak=default:
OPTIMIZE= -fast -unroll4 -auto

470.lbm=peak=default:
copies=4
PORTABILITY =
CC = $(CC32)
COPTIMIZE= -unroll2 -scalar-rep- -prefetch -opt-malloc-options=3

481.wrf=peak=default:
OPTIMIZE= -fast  -prefetch
feedback=0

482.sphinx3=peak=default:
copies=4
PORTABILITY =
CC = $(CC32)
COPTIMIZE= -unroll2
feedback=no

#################################################################
# (Edit this to match your system)
#################################################################

default=default=default=default:
sw_avail         = Nov-2007
sw_os            = SUSE LINUX Enterprise Server 10 SP1 for x86_64
sw_other000      = SmartHeap library V8.1
sw_other001 = Binutils 2.17.50.0.15

int=default=default=default:
sw_compiler001   = Intel C++ Compiler for Linux32 and Linux64 version 10.1
sw_compiler002   = Build 20070913
sw_auto_parallel = Yes

fp=default=default=default:
sw_compiler000   = Intel C++ and Fortran Compiler for Linux32 and
sw_compiler001   = Linux64 version 10.1
sw_compiler002 = Build 20070913
sw_auto_parallel = Yes

# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.

459.GemsFDTD
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1

447.dealII
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1

434.zeusmp
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1

433.milc
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1
default:
notes_os_shell_000 = 'ulimit -s unlimited' was used to set the stacksize to unlimited