SPEC® CINT2006 Result

Copyright 2006-2014 Standard Performance Evaluation Corporation

Fujitsu Siemens Computers

PRIMERGY TX600 S3, Intel Xeon processor 7130M,
3.20 GHz

CPU2006 license: 22 Test date: May-2007
Test sponsor: Fujitsu Siemens Computers Hardware Availability: Aug-2006
Tested by: Fujitsu Siemens Computers Software Availability: Mar-2007
Benchmark results graph
Hardware
CPU Name: Intel Xeon 7130M
CPU Characteristics: 800 MHz system bus
CPU MHz: 3200
FPU: Integrated
CPU(s) enabled: 8 cores, 4 chips, 2 cores/chip, 2 threads/core
CPU(s) orderable: 1,2,4 chips
Primary Cache: 12 K micro-ops I + 16 KB D on chip per core
Secondary Cache: 1 MB I+D on chip per core
L3 Cache: 8 MB I+D on chip per chip
Other Cache: None
Memory: 32 GB (16x2 GB DDR2 PC2-3200R, 2 rank, CAS 3-3-3,
with ECC)
Disk Subsystem: Seagate ST973401SS (SAS 73GB 10 krpm)
Other Hardware: None
Software
Operating System: 64-Bit SUSE LINUX Enterprise Server 10, Kernel
2.6.16.21-0.8-smp on an x86_64
Compiler: Intel C++ Compiler for IA32/EM64T application,
Version 9.1 - Build 20070215, Package-ID:
l_cc_p_9.1.047
Auto Parallel: No
File System: ReiserFS
System State: Multiuser Runlevel 3
Base Pointers: 32-bit
Peak Pointers: 32/64-bit
Other Software: Smart Heap Library, Version 8.1

Results Table

Benchmark Base Peak
Copies Seconds Ratio Seconds Ratio Seconds Ratio Copies Seconds Ratio Seconds Ratio Seconds Ratio
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
400.perlbench 16 1802 86.8 1841 84.9 1780 87.8 16 1597 97.9 1589 98.4 1592 98.2
401.bzip2 16 2300 67.1 2296 67.2 2292 67.4 16 2189 70.5 2185 70.7 2189 70.5
403.gcc 16 1877 68.6 1860 69.3 1888 68.2 16 1877 68.6 1860 69.3 1888 68.2
429.mcf 16 2286 63.8 2274 64.2 2267 64.4 16 2188 66.7 2201 66.3 2186 66.7
445.gobmk 16 2179 77.0 2180 77.0 2170 77.3 16 1993 84.2 2002 83.8 2008 83.6
456.hmmer 16 2424 61.6 2401 62.2 2414 61.8 16 1723 86.7 1723 86.6 1720 86.8
458.sjeng 16 3059 63.3 3065 63.2 3056 63.4 16 2718 71.2 2715 71.3 2718 71.2
462.libquantum 16 10864 30.5 10868 30.5 10863 30.5 16 10850 30.6 10866 30.5 10850 30.6
464.h264ref 16 2422 146   2416 147   2423 146   16 2308 153   2326 152   2323 152  
471.omnetpp 16 2463 40.6 2469 40.5 2463 40.6 16 2372 42.2 2372 42.2 2377 42.1
473.astar 16 1850 60.7 1848 60.8 1846 60.8 16 1807 62.2 1811 62.0 1806 62.2
483.xalancbmk 16 1462 75.5 1460 75.6 1462 75.5 16 1462 75.5 1460 75.6 1462 75.5

Operating System Notes

 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run
 '/usr/bin/taskset' used to bind processes to CPUs

General Notes


 The system bus runs at 800 MHz

 All binaries were built with 32-bit Intel compiler except:
 401.bzip2, 456.hmmer and 462.libquantum in peak were built with
 64-bit Intel compiler by changing the path for include and library files.

 BIOS configuration:
 Hardware Prefetch = Enable

 This result was measured on the PRIMERGY RX600 S3. The PRIMERGY RX600 S3 and
 the PRIMERGY TX600 S3 are electronically equivalent.

 For information about Fujitsu Siemens Computers in your country please see:
 http://www.fujitsu-siemens.com/countries

Base Compiler Invocation

C benchmarks:

 icc 

C++ benchmarks:

 icpc 

Base Portability Flags

400.perlbench:  -DSPEC_CPU_LINUX_X64 
462.libquantum:  -DSPEC_CPU_LINUX 
483.xalancbmk:  -DSPEC_CPU_LINUX 

Base Optimization Flags

C benchmarks:

 -fast 

C++ benchmarks:

 -xP   -O3   -ipo   -no-prec-div   -L/opt/SmartHeap_8_1/lib -lsmartheap 

Peak Compiler Invocation

C benchmarks (except as noted below):

 icc 
401.bzip2:  /opt/intel/cce/9.1.047/bin/icc   -I/opt/intel/cce/9.1.047/include   -L/opt/intel/cce/9.1.047/lib 
456.hmmer:  /opt/intel/cce/9.1.047/bin/icc   -I/opt/intel/cce/9.1.047/include   -L/opt/intel/cce/9.1.047/lib 
462.libquantum:  /opt/intel/cce/9.1.047/bin/icc   -I/opt/intel/cce/9.1.047/include   -L/opt/intel/cce/9.1.047/lib 

C++ benchmarks:

 icpc 

Peak Portability Flags

400.perlbench:  -DSPEC_CPU_LINUX_X64 
401.bzip2:  -DSPEC_CPU_LP64 
456.hmmer:  -DSPEC_CPU_LP64 
462.libquantum:  -DSPEC_CPU_LP64   -DSPEC_CPU_LINUX 
483.xalancbmk:  -DSPEC_CPU_LINUX 

Peak Optimization Flags

C benchmarks:

400.perlbench:  -prof_gen(pass 1)   -prof_use(pass 2)   -fast 
401.bzip2:  -fast 
403.gcc:  basepeak = yes 
429.mcf:  -prof_gen(pass 1)   -prof_use(pass 2)   -fast   -L/opt/SmartHeap_8_1/lib -lsmartheap 
445.gobmk:  Same as 429.mcf 
456.hmmer:  Same as 400.perlbench 
458.sjeng:  Same as 429.mcf 
462.libquantum:  Same as 400.perlbench 
464.h264ref:  Same as 429.mcf 

C++ benchmarks:

471.omnetpp:  -prof_gen(pass 1)   -prof_use(pass 2)   -xP   -O3   -ipo   -no-prec-div   -L/opt/SmartHeap_8_1/lib -lsmartheap 
473.astar:  -prof_gen(pass 1)   -prof_use(pass 2)   -fast   -L/opt/SmartHeap_8_1/lib -lsmartheap 
483.xalancbmk:  basepeak = yes 

The flags file that was used to format this result can be browsed at
http://www.spec.org/cpu2006/flags/CPU2006_flags.20090714.09.html.

You can also download the XML flags source by saving the following link:
http://www.spec.org/cpu2006/flags/CPU2006_flags.20090714.09.xml.

SPEC and SPECint are registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders.

For questions about this result, please contact the tester.
For other inquiries, please contact [email protected]
Copyright 2006-2014 Standard Performance Evaluation Corporation
Tested with SPEC CPU2006 v1.0.
Report generated on Tue Jul 22 11:04:43 2014 by SPEC CPU2006 HTML formatter v6932.
Originally published on 12 June 2007.