SPECpower_ssj2008 Copyright (C) 2007-2018 Standard Performance Evaluation Corporation Hewlett Packard Enterprise Synergy 480 Gen10 Compute Module SPECpower_ssj2008 = 10,541 overall ssj_ops/watt Test Sponsor: Hewlett Packard Enterprise SPEC License #: 3 Tested By: Hewlett Packard Enterprise Test Location: Houston, TX, USA Test Date: Aug 26, 2018 Publication: Sep 12, 2018 Hardware Availability: Jun-2018 Software Availability: Mar-2018 Test Method: Multi Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 99.7% | 51,525,769 | 4,444 | 11,596 90% | 90.0% | 46,514,542 | 4,022 | 11,566 80% | 80.0% | 41,342,285 | 3,384 | 12,217 70% | 70.0% | 36,167,741 | 2,927 | 12,356 60% | 59.9% | 30,972,778 | 2,551 | 12,141 50% | 50.0% | 25,824,345 | 2,232 | 11,571 40% | 40.0% | 20,660,753 | 1,985 | 10,411 30% | 30.0% | 15,486,508 | 1,766 | 8,768 20% | 20.0% | 10,343,727 | 1,554 | 6,657 10% | 10.0% | 5,162,153 | 1,332 | 3,874 Active Idle | 0 | 746 | 0 sum of ssj_ops / sum of power = | 10,541 Aggregate SUT Data # of Nodes | # of Chips | # of Cores | # of | Total RAM | # of OS Images | # of JVM | | | Threads | (GB) | | Instances ---------- | ---------- | ---------- | ---------- | ---------- | -------------- | --------- 9 | 18 | 504 | 1,008 | 1,728 | 9 | 36 System Under Test Shared Hardware SHARED HARDWARE Enclosure: HPE Synergy 12000 Frame Form Factor: 10U Power Supply Quantity and Rating 6 x 2650 (W): Power Supply Details: HPE 2650W Performance Hot Plug Titanium Plus Power Supply Kit (798095-B21) Network Switch: 1 Network Switch Details: HP A5820X Series Switch JG219A KVM Switch: None KVM Switch Details: N/A Other Hardware: 1 x HPE Synergy 10Gb Pass Thru Module (799330-B21), 1 x HPE Synergy Composer (804353-B21), 1 x HPE Synergy Frame Link Module (804942-B21) Comment: Network switch not measured for power Set: 'SUT' Set Identifier: SUT Set Description: System Under Test # of Identical Nodes: 9 Comment: SUT HARDWARE PER NODE Hardware Vendor: Hewlett Packard Enterprise Model: Synergy 480 Gen10 Compute Module Form Factor: Other CPU Name: Intel Xeon Platinum 8180 2.50GHz CPU Characteristics: 28-Core, 2.50 GHz, 38.5 MB L3 Cache CPU Frequency (MHz): 2500 CPU(s) Enabled: 56 cores, 2 chips, 28 cores/chip Hardware Threads: 112 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 1 MB I+D on chip per core Tertiary Cache: 39424 KB I+D on chip per chip Other Cache: None Memory Amount (GB): 192 # and size of DIMM: 12 x 16384 MB Memory Details: 12 x 16GB 2Rx8 PC4-2666-V ECC; slots 1, 3, 5, 8, 10 and 12 populated on each CPU socket Power Supply Quantity and Rating None (W): Power Supply Details: Shared Disk Drive: 1 x HPE Synergy 480 Gen10 M.2 FIO Adapter Board Kit (873165-B21); 1 x HPE 480GB SATA 6G Read Intensive M.2 2280 SSD (875498-B21) Disk Controller: 1 x HPE Smart Array S100i SR Gen10 # and type of Network Interface 1 x HPE Synergy 3820C 10/20Gb 2-port Cards (NICs) Installed: Converged Network Adapter (777430-B21) NICs Enabled in Firmware / OS / 2/1/1 Connected: Network Speed (Mbit): 10000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE PER NODE Power Management: Enabled (see SUT Notes) Operating System (OS): Windows Server 2012 R2 Datacenter OS Version: 6.3 (Build 9600) Filesystem: NTFS JVM Vendor: Oracle Corporation JVM Version: Java HotSpot(TM) 64-Bit Server VM (build 24.80-b11, mixed mode), version 1.7.0_80 JVM Command-line Options: -server -Xmn19g -Xms21g -Xmx21g -XX:SurvivorRatio=1 -XX:TargetSurvivorRatio=99 -XX:ParallelGCThreads=28 -XX:AllocatePrefetchDistance=256 -XX:AllocatePrefetchLines=4 -XX:LoopUnrollLimit=45 -XX:InitialTenuringThreshold=12 -XX:MaxTenuringThreshold=15 -XX:InlineSmallCode=9000 -XX:MaxInlineSize=270 -XX:FreqInlineSize=6000 -XX:+UseLargePages -XX:+UseParallelOldGC -XX:+AggressiveOpts JVM Affinity: start /NODE [0,1,2,3] /AFFINITY [0xFFFFFFF] JVM Instances: 4 JVM Initial Heap (MB): 21000 JVM Maximum Heap (MB): 21000 JVM Address Bits: 64 Boot Firmware Version: I42 v1.32 (02/01/2018) Management Firmware Version: 1.15 Aug 17 2017 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: HPE Composer Version 3.10.07 (HPE OneView) with HPE Synergy Custom SPP Bundle 2017.10.20180323; Microsoft Windows KB4054519, KB4056898 Boot Firmware Settings * USB Control: All USB Ports Disabled * USB Boot Support: Disabled * Internal SD Card Slot: Disabled * SR-IOV: Disabled * VT-D: Disabled * VT-x: Disabled * x2APIC: Disabled * Memory Refresh Rate: 1x Refresh * Memory Patrol Scrubbing: Disabled * Memory Bus Frequency: 2400 MHz * Power Regulator: OS Control * Energy Performance Bias: Balanced Power * Turbo Boost Technology: Disabled * Collaborative Power Control: Disabled * DMI Link Frequency: Gen 1 * Sub-NUMA Clustering: Enabled * Intel NIC DMA Channels (IOAT): Disabled * HW Prefetcher: Disabled * Adjacent Sector Prefetch: Disabled * DCU Stream Prefetcher: Disabled * DCU IP Prefetcher: Disabled * LLC Prefetcher: Disabled * XPT Prefetcher: Enabled * UPI Link Frequency: Min UPI Speed * Maximum PCI Express Speed: PCIe Generation 1.0 * Embedded SATA Configuration: Smart Array SW RAID Support * Embedded SATA Controller #1: Disabled * AHS PCI Logging Level: Minimal Logging Management Firmware Settings See SUT Notes System Under Test Notes * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * Run initiated via Windows Remote Desktop Connection * SPECpower_ssj.props input.load_level.number_warehouses set to 112 due to a known inconsistency in processor reporting with this Java version. * Windows Power Plan = Balanced * Turn off display = 1 minute * Turn off hard disk = 1 minute * Processor power management: Minimum Processor State = 0%, Maximum Processor State = 100% * System cooling policy = Active * Synergy Frame Power Supply mode set to Redundant Power Supply via HPE OneView. * Applied protection against speculative execution as explained in https://support.microsoft.com/en-us/help/4072698/windows-server-guidance-to-pro tect-against-the-speculative-execution (Last Updated: Aug 14, 2018) * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. * Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. Controller System HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL360 Gen9 CPU Description: 2 x Intel Xeon E5-2660 v3 Memory amount (GB): 128 SOFTWARE Operating System (OS): Microsoft Windows Server 2012 R2 JVM Vendor: Oracle Corporation JVM Version: 1.8.0_144-b01 (build 25.144-b01, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91GB53024 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: Transcat Metrology Calibration Label: 5-EM5Y4-80-1 Date of Calibration: 21-Jun-2018 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.1-260d064e-20161220 Setup Description: SUT Power Supply 2, and 5 POWER ANALYZER PWR2 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91GB47168 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: Transcat Metrology Calibration Label: 5-EN5Y4-60-1 Date of Calibration: 21-Jun-2018 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.1-260d064e-20161220 Setup Description: SUT Power Supplies 1, and 4 POWER ANALYZER PWR3 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91GC21887 Connectivity: GPIB vi NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: Transcat Metrology Calibration Label: 5-EM5Y4-20-1 Date of Calibration: 21-Jun-2018 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.8.1-260d064e-20161220 Setup Description: SUT Power Supplies 3, and 6 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main intake Notes None Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 4,444 | 22.4 90% | 4,022 | 22.4 80% | 3,384 | 22.4 70% | 2,927 | 22.6 60% | 2,551 | 22.6 50% | 2,232 | 22.6 40% | 1,985 | 22.6 30% | 1,766 | 22.6 20% | 1,554 | 22.5 10% | 1,332 | 22.5 Active Idle | 746 | 22.6 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 208V / 60 Hz / 1 phase / | 22.4 | 132 1 wire | | See the Power/Temperature Details Report (power_ssj2008-20180827-00837-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 51,676,308 Calibration 2 | | | 51,615,642 Calibration 3 | | | 51,718,319 ssj_ops@calibrated=51,666,980 100% | 99.7% | 51,666,980 | 51,525,769 90% | 90.0% | 46,500,282 | 46,514,542 80% | 80.0% | 41,333,584 | 41,342,285 70% | 70.0% | 36,166,886 | 36,167,741 60% | 59.9% | 31,000,188 | 30,972,778 50% | 50.0% | 25,833,490 | 25,824,345 40% | 40.0% | 20,666,792 | 20,660,753 30% | 30.0% | 15,500,094 | 15,486,508 20% | 20.0% | 10,333,396 | 10,343,727 10% | 10.0% | 5,166,698 | 5,162,153 Active Idle | | 0 | 0 See the Aggregate Performance Report (power_ssj2008-20180827-00837.SUT.txt) for additional details. Copyright (C) 2007-2018 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]