|
Supermicro (Test Sponsor: The Portland Group) |
SPECompG_base2012 = 3.52 |
|
A+ Server 2022G-URF |
SPECompG_peak2012 = 3.52 |
| OMP2012 license: | 019 | Test date: | Jan-2013 |
|---|---|---|---|
| Test sponsor: | The Portland Group | Hardware Availability: | Sep-2012 |
| Tested by: | The Portland Group | Software Availability: | Jan-2013 |
| Hardware | |
|---|---|
| CPU Name: | AMD Opteron 6386 SE |
| CPU Characteristics: | AMD Turbo CORE technology up to 3.50 GHz |
| CPU MHz: | 2800 |
| CPU MHz Maximum: | 3500 |
| FPU: | Integrated |
| CPU(s) enabled: | 32 cores, 2 chips, 16 cores/chip |
| CPU(s) orderable: | 1,2 chips |
| Primary Cache: | 512 KB I on chip per chip, 64 KB I shared / 2 cores; 16 KB D on chip per core |
| Secondary Cache: | 16 MB I+D on chip per chip, 2 MB shared / 2 cores |
| L3 Cache: | 16 MB I+D on chip per chip, 8 MB shared / 8 cores |
| Other Cache: | None |
| Memory: | 64 GB (8 x 8GB 2Rx4 PC3L-12800R-11, ECC) |
| Disk Subsystem: | 10 x 144GB, RAID, 10000 RPM |
| Other Hardware: | None |
| Base Threads Run: | 32 |
| Minimum Peak Threads: | 32 |
| Maximum Peak Threads: | 32 |
| Software | |
|---|---|
| Operating System: | Red Hat Enterprise Linux Server release 6.2 (Santiago) 2.6.32-220.el6.x86_64 |
| Compiler: | C/C++/Fortran: Version 13.1 of PGI Server Complete |
| Auto Parallel: | No |
| File System: | nfs |
| System State: | Run level 3 (multi-user) |
| Base Pointers: | 64-bit |
| Peak Pointers: | 64-bit |
| Other Software: | None |
Results Table
| Benchmark | Base | Peak | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Threads | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Threads | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
| Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
| 350.md | 32 | 1074 | 4.31 | 1073 | 4.31 | 1073 | 4.31 | 32 | 1074 | 4.31 | 1073 | 4.31 | 1073 | 4.31 |
| 351.bwaves | 32 | 1523 | 2.97 | 1531 | 2.96 | 1521 | 2.98 | 32 | 1523 | 2.97 | 1531 | 2.96 | 1521 | 2.98 |
| 352.nab | 32 | 933 | 4.17 | 930 | 4.18 | 930 | 4.18 | 32 | 933 | 4.17 | 930 | 4.18 | 930 | 4.18 |
| 357.bt331 | 32 | 859 | 5.52 | 861 | 5.50 | 860 | 5.51 | 32 | 859 | 5.52 | 861 | 5.50 | 860 | 5.51 |
| 358.botsalgn | 32 | 1242 | 3.50 | 1242 | 3.50 | 1242 | 3.50 | 32 | 1242 | 3.50 | 1242 | 3.50 | 1242 | 3.50 |
| 359.botsspar | 32 | 1710 | 3.07 | 1716 | 3.06 | 1708 | 3.07 | 32 | 1710 | 3.07 | 1716 | 3.06 | 1708 | 3.07 |
| 360.ilbdc | 32 | 1461 | 2.44 | 1461 | 2.44 | 1461 | 2.44 | 32 | 1461 | 2.44 | 1461 | 2.44 | 1461 | 2.44 |
| 362.fma3d | 32 | 1038 | 3.66 | 1038 | 3.66 | 1039 | 3.66 | 32 | 1038 | 3.66 | 1038 | 3.66 | 1039 | 3.66 |
| 363.swim | 32 | 1325 | 3.42 | 1327 | 3.41 | 1327 | 3.41 | 32 | 1325 | 3.42 | 1327 | 3.41 | 1327 | 3.41 |
| 367.imagick | 32 | 2107 | 3.34 | 2229 | 3.15 | 2226 | 3.16 | 32 | 2107 | 3.34 | 2229 | 3.15 | 2226 | 3.16 |
| 370.mgrid331 | 32 | 1895 | 2.33 | 1880 | 2.35 | 1891 | 2.34 | 32 | 1895 | 2.33 | 1880 | 2.35 | 1891 | 2.34 |
| 371.applu331 | 32 | 1755 | 3.45 | 1752 | 3.46 | 1768 | 3.43 | 32 | 1755 | 3.45 | 1752 | 3.46 | 1768 | 3.43 |
| 372.smithwa | 32 | 1168 | 4.59 | 1167 | 4.59 | 1169 | 4.59 | 32 | 1168 | 4.59 | 1167 | 4.59 | 1169 | 4.59 |
| 376.kdtree | 32 | 1132 | 3.98 | 1261 | 3.57 | 1058 | 4.25 | 32 | 1132 | 3.98 | 1261 | 3.57 | 1058 | 4.25 |
Platform Notes
Sysinfo program /scratch/cparrott/OMP2012_v1.0/Docs/sysinfo $Rev: 395 $ $Date:: 2012-07-25 #$ 8f8c0fe9e19c658963a1e67685e50647 running on piledriver Tue Jan 29 16:28:23 2013 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/omp2012/Docs/config.html#sysinfo From /proc/cpuinfo model name : AMD Opteron(tm) Processor 6386 SE 2 "physical id"s (chips) 32 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 8 siblings : 16 physical 0: cores 0 1 2 3 4 5 6 7 physical 1: cores 0 1 2 3 4 5 6 7 cache size : 2048 KB From /proc/meminfo MemTotal: 66087492 kB HugePages_Total: 0 Hugepagesize: 2048 kB /usr/bin/lsb_release -d Red Hat Enterprise Linux Server release 6.2 (Santiago) From /etc/*release* /etc/*version* redhat-release: Red Hat Enterprise Linux Server release 6.2 (Santiago) system-release: Red Hat Enterprise Linux Server release 6.2 (Santiago) system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server uname -a: Linux piledriver 2.6.32-220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 x86_64 x86_64 x86_64 GNU/Linux run-level 3 Nov 9 14:31 SPEC is set to: /scratch/cparrott/OMP2012_v1.0 Filesystem Type Size Used Avail Use% Mounted on filer01.pgi.net:/vol/vol1/scratch nfs 727G 129G 598G 18% /proj/scratch Additional information from dmidecode: (End of data from sysinfo program)
General Notes
Software Environment:
export MP_BIND=yes
ulimit -s unlimited
Base Portability Flags
| 350.md: | -Mfree |
| 351.bwaves: | -mcmodel=medium |
| 357.bt331: | -mcmodel=medium |
| 363.swim: | -mcmodel=medium |
Base Optimization Flags
C benchmarks:
| -mp -fast -Mipa=fast -Mipa=inline -Msmartalloc=huge -Mfprelaxed |
C++ benchmarks:
| -mp -fast -Mipa=fast -Mipa=inline -Msmartalloc=huge -Mfprelaxed |
Fortran benchmarks:
| -mp -fast -Mipa=fast -Mipa=inline -Msmartalloc=huge -Mfprelaxed |
Peak Optimization Flags
C benchmarks:
| 352.nab: | basepeak = yes |
| 358.botsalgn: | basepeak = yes |
| 359.botsspar: | basepeak = yes |
| 367.imagick: | basepeak = yes |
| 372.smithwa: | basepeak = yes |
C++ benchmarks:
| 376.kdtree: | basepeak = yes |
Fortran benchmarks:
| 350.md: | basepeak = yes |
| 351.bwaves: | basepeak = yes |
| 357.bt331: | basepeak = yes |
| 360.ilbdc: | basepeak = yes |
| 362.fma3d: | basepeak = yes |
| 363.swim: | basepeak = yes |
| 370.mgrid331: | basepeak = yes |
| 371.applu331: | basepeak = yes |