Hewlett Packard Enterprise (Test Sponsor: HPE) ProLiant DL560 Gen11 |
SPECrate®2017_int_base = 1230 |
SPECrate®2017_int_peak = Not Run |
CPU2017 License: | 3 | Test Date: | Apr-2023 |
---|---|---|---|
Test Sponsor: | HPE | Hardware Availability: | May-2023 |
Tested by: | HPE | Software Availability: | Dec-2022 |
Benchmark result graphs are available in the PDF report.
Hardware | |
---|---|
CPU Name: | Intel Xeon Gold 6448H |
Max MHz: | 4100 |
Nominal: | 2400 |
Enabled: | 128 cores, 4 chips, 2 threads/core |
Orderable: | 1, 2, 4 chip(s) |
Cache L1: | 32 KB I + 48 KB D on chip per core |
L2: | 2 MB I+D on chip per core |
L3: | 60 MB I+D on chip per chip |
Other: | None |
Memory: | 1 TB (32 x 32 GB 2Rx8 PC5-4800B-R) |
Storage: | 1 x 480 GB SATA SSD |
Other: | None |
Software | |
---|---|
OS: | Red Hat Enterprise Linux 9.0 (Plow) Kernel 5.14.0-70.13.1.el9_0.x86_64 |
Compiler: | C/C++: Version 2023.0 of Intel oneAPI DPC++/C++ Compiler for Linux; Fortran: Version 2023.0 of Intel Fortran Compiler for Linux; |
Parallel: | No |
Firmware: | HPE BIOS Version v1.30 03/01/2023 released Mar-2023 |
File System: | xfs |
System State: | Run level 3 (multi-user) |
Base Pointers: | 64-bit |
Peak Pointers: | Not Applicable |
Other: | None |
Power Management: | BIOS and OS set to prefer performance at the cost of additional power usage |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
SPECrate®2017_int_base | 1230 | |||||||||||||
SPECrate®2017_int_peak | Not Run | |||||||||||||
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
500.perlbench_r | 256 | 455 | 896 | 454 | 898 | 457 | 892 | |||||||
502.gcc_r | 256 | 372 | 975 | 371 | 976 | 372 | 976 | |||||||
505.mcf_r | 256 | 213 | 1950 | 214 | 1940 | 214 | 1930 | |||||||
520.omnetpp_r | 256 | 429 | 782 | 430 | 780 | 430 | 781 | |||||||
523.xalancbmk_r | 256 | 118 | 2290 | 118 | 2290 | 117 | 2310 | |||||||
525.x264_r | 256 | 189 | 2370 | 189 | 2380 | 188 | 2390 | |||||||
531.deepsjeng_r | 256 | 335 | 875 | 336 | 874 | 336 | 874 | |||||||
541.leela_r | 256 | 507 | 836 | 508 | 834 | 508 | 834 | |||||||
548.exchange2_r | 256 | 262 | 2560 | 262 | 2560 | 262 | 2560 | |||||||
557.xz_r | 256 | 484 | 571 | 489 | 565 | 489 | 566 |
SPEC has ruled that the compiler used for this result was performing a compilation that specifically improves the performance of the 523.xalancbmk_r / 623.xalancbmk_s benchmarks using a priori knowledge of the SPEC code and dataset to perform a transformation that has narrow applicability. In order to encourage optimizations that have wide applicability (see rule 1.4 https://www.spec.org/cpu2017/Docs/runrules.html#rule_1.4), SPEC will no longer publish results using this optimization. This result is left in the SPEC results database for historical reference.
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited" Transparent Huge Pages enabled by default Prior to runcpu invocation Filesystem page cache synced and cleared with: sync; echo 3> /proc/sys/vm/drop_caches runcpu command invoked through numactl i.e.: numactl --interleave=all runcpu <etc> IRQ balance service was stopped using "systemctl stop irqbalance.service" tuned-adm profile was set to Accelerator-Performance using "tuned-adm profile accelerator-performance" perf-bias for all the CPUs is set using "cpupower set -b 0"
Environment variables set by runcpu before the start of the run: LD_LIBRARY_PATH = "/home/cpu2017/lib/intel64:/home/cpu2017/lib/ia32:/home/cpu2017/je5.0.1-32" MALLOC_CONF = "retain:true"
Binaries compiled on a system with 2x Intel Xeon Platinum 8280M CPU + 384GB RAM memory using Red Hat Enterprise Linux 8.4 NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented.
The system ROM used for this result contains Intel microcode version 0x2b0001b0 for the Intel Xeon Gold 6448H Processor BIOS Configuration Workload Profile set to General Throughput Compute Memory Patrol Scrubbing set to Disabled Last Level Cache (LLC) Dead Line Allocation set to Disabled Enhanced Processor Performance Profile set to Aggressive Thermal Configuration set to Maximum Cooling Workload Profile set to Custom Adjacent Sector Prefetch set to Disabled DCU Stream Prefetcher set to Disabled Intel UPI Link Power Management set to Enabled Minimum Processor Idle Power Package C-State set to Package C6 (non-retention) State Sysinfo program /home/cpu2017/bin/sysinfo Rev: r6732 of 2022-11-07 fe91c89b7ed5c36ae2c92cc097bec197 running on localhost.localdomain Thu Apr 7 05:35:18 2022 SUT (System Under Test) info as seen by some common utilities. ------------------------------------------------------------ Table of contents ------------------------------------------------------------ 1. uname -a 2. w 3. Username 4. ulimit -a 5. sysinfo process ancestry 6. /proc/cpuinfo 7. lscpu 8. numactl --hardware 9. /proc/meminfo 10. who -r 11. Systemd service manager version: systemd 250 (250-6.el9_0) 12. Services, from systemctl list-unit-files 13. Linux kernel boot-time arguments, from /proc/cmdline 14. cpupower frequency-info 15. tuned-adm active 16. sysctl 17. /sys/kernel/mm/transparent_hugepage 18. /sys/kernel/mm/transparent_hugepage/khugepaged 19. OS release 20. Disk information 21. /sys/devices/virtual/dmi/id 22. dmidecode 23. BIOS ------------------------------------------------------------ ------------------------------------------------------------ 1. uname -a Linux localhost.localdomain 5.14.0-70.13.1.el9_0.x86_64 #1 SMP PREEMPT Thu Apr 14 12:42:38 EDT 2022 x86_64 x86_64 x86_64 GNU/Linux ------------------------------------------------------------ 2. w 05:35:18 up 5 min, 2 users, load average: 0.21, 2.50, 1.60 USER TTY LOGIN@ IDLE JCPU PCPU WHAT root tty1 05:31 3:34 0.00s 0.00s -bash root pts/0 05:32 6.00s 0.84s 0.01s -bash ------------------------------------------------------------ 3. Username From environment variable $USER: root ------------------------------------------------------------ 4. ulimit -a real-time non-blocking time (microseconds, -R) unlimited core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 4126510 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) unlimited cpu time (seconds, -t) unlimited max user processes (-u) 4126510 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited ------------------------------------------------------------ 5. sysinfo process ancestry /usr/lib/systemd/systemd --switched-root --system --deserialize 28 sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups sshd: root [priv] sshd: root@pts/0 -bash -bash runcpu --nobuild --action validate --define default-platform-flags --define numcopies=256 -c ic2023.0-lin-sapphirerapids-rate-20221201.cfg --define smt-on --define cores=128 --define physicalfirst --define invoke_with_interleave --define drop_caches --tune base -o all intrate runcpu --nobuild --action validate --define default-platform-flags --define numcopies=256 --configfile ic2023.0-lin-sapphirerapids-rate-20221201.cfg --define smt-on --define cores=128 --define physicalfirst --define invoke_with_interleave --define drop_caches --tune base --output_format all --nopower --runmode rate --tune base --size refrate intrate --nopreenv --note-preenv --logfile $SPEC/tmp/CPU2017.014/templogs/preenv.intrate.014.0.log --lognum 014.0 --from_runcpu 2 specperl $SPEC/bin/sysinfo $SPEC = /home/cpu2017 ------------------------------------------------------------ 6. /proc/cpuinfo model name : Intel(R) Xeon(R) Gold 6448H vendor_id : GenuineIntel cpu family : 6 model : 143 stepping : 7 microcode : 0x2b0001b0 bugs : spectre_v1 spectre_v2 spec_store_bypass swapgs cpu cores : 32 siblings : 64 4 physical ids (chips) 256 processors (hardware threads) physical id 0: core ids 0-31 physical id 1: core ids 0-31 physical id 2: core ids 0-31 physical id 3: core ids 0-31 physical id 0: apicids 0-63 physical id 1: apicids 128-191 physical id 2: apicids 256-319 physical id 3: apicids 384-447 Caution: /proc/cpuinfo data regarding chips, cores, and threads is not necessarily reliable, especially for virtualized systems. Use the above data carefully. ------------------------------------------------------------ 7. lscpu From lscpu from util-linux 2.37.4: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Address sizes: 46 bits physical, 57 bits virtual Byte Order: Little Endian CPU(s): 256 On-line CPU(s) list: 0-255 Vendor ID: GenuineIntel BIOS Vendor ID: Intel(R) Corporation Model name: Intel(R) Xeon(R) Gold 6448H BIOS Model name: Intel(R) Xeon(R) Gold 6448H CPU family: 6 Model: 143 Thread(s) per core: 2 Core(s) per socket: 32 Socket(s): 4 Stepping: 7 BogoMIPS: 4800.00 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 cat_l2 cdp_l3 invpcid_single cdp_l2 ssbd mba ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid cqm rdt_a avx512f avx512dq rdseed adx smap avx512ifma clflushopt clwb intel_pt avx512cd sha_ni avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local split_lock_detect avx_vnni avx512_bf16 wbnoinvd dtherm ida arat pln pts avx512vbmi umip pku ospke waitpkg avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg tme avx512_vpopcntdq la57 rdpid bus_lock_detect cldemote movdiri movdir64b enqcmd fsrm md_clear serialize tsxldtrk pconfig arch_lbr avx512_fp16 amx_tile flush_l1d arch_capabilities Virtualization: VT-x L1d cache: 6 MiB (128 instances) L1i cache: 4 MiB (128 instances) L2 cache: 256 MiB (128 instances) L3 cache: 240 MiB (4 instances) NUMA node(s): 8 NUMA node0 CPU(s): 0-15,128-143 NUMA node1 CPU(s): 16-31,144-159 NUMA node2 CPU(s): 32-47,160-175 NUMA node3 CPU(s): 48-63,176-191 NUMA node4 CPU(s): 64-79,192-207 NUMA node5 CPU(s): 80-95,208-223 NUMA node6 CPU(s): 96-111,224-239 NUMA node7 CPU(s): 112-127,240-255 Vulnerability Itlb multihit: Not affected Vulnerability L1tf: Not affected Vulnerability Mds: Not affected Vulnerability Meltdown: Not affected Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via prctl Vulnerability Spectre v1: Mitigation; usercopy/swapgs barriers and __user pointer sanitization Vulnerability Spectre v2: Mitigation; Enhanced IBRS, IBPB conditional, RSB filling Vulnerability Srbds: Not affected Vulnerability Tsx async abort: Not affected From lscpu --cache: NAME ONE-SIZE ALL-SIZE WAYS TYPE LEVEL SETS PHY-LINE COHERENCY-SIZE L1d 48K 6M 12 Data 1 64 1 64 L1i 32K 4M 8 Instruction 1 64 1 64 L2 2M 256M 16 Unified 2 2048 1 64 L3 60M 240M 15 Unified 3 65536 1 64 ------------------------------------------------------------ 8. numactl --hardware NOTE: a numactl 'node' might or might not correspond to a physical chip. available: 8 nodes (0-7) node 0 cpus: 0-15,128-143 node 0 size: 128603 MB node 0 free: 127477 MB node 1 cpus: 16-31,144-159 node 1 size: 129017 MB node 1 free: 128549 MB node 2 cpus: 32-47,160-175 node 2 size: 129017 MB node 2 free: 128433 MB node 3 cpus: 48-63,176-191 node 3 size: 129017 MB node 3 free: 128505 MB node 4 cpus: 64-79,192-207 node 4 size: 129017 MB node 4 free: 128472 MB node 5 cpus: 80-95,208-223 node 5 size: 129017 MB node 5 free: 128319 MB node 6 cpus: 96-111,224-239 node 6 size: 128980 MB node 6 free: 128508 MB node 7 cpus: 112-127,240-255 node 7 size: 128997 MB node 7 free: 128537 MB node distances: node 0 1 2 3 4 5 6 7 0: 10 20 30 30 30 30 30 30 1: 20 10 30 30 30 30 30 30 2: 30 30 10 20 30 30 30 30 3: 30 30 20 10 30 30 30 30 4: 30 30 30 30 10 20 30 30 5: 30 30 30 30 20 10 30 30 6: 30 30 30 30 30 30 10 20 7: 30 30 30 30 30 30 20 10 ------------------------------------------------------------ 9. /proc/meminfo MemTotal: 1056427556 kB ------------------------------------------------------------ 10. who -r run-level 3 Apr 7 05:30 ------------------------------------------------------------ 11. Systemd service manager version: systemd 250 (250-6.el9_0) Default Target Status multi-user running ------------------------------------------------------------ 12. Services, from systemctl list-unit-files STATE UNIT FILES enabled NetworkManager NetworkManager-dispatcher NetworkManager-wait-online auditd chronyd crond dbus-broker firewalld getty@ irqbalance kdump lvm2-monitor mdmonitor microcode nis-domainname rhsmcertd rsyslog selinux-autorelabel-mark sshd sssd systemd-network-generator tuned udisks2 enabled-runtime systemd-remount-fs disabled blk-availability chrony-wait console-getty cpupower debug-shell kvm_stat man-db-restart-cache-update nftables powertop rdisc rhsm rhsm-facts rpmdb-rebuild serial-getty@ sshd-keygen@ systemd-boot-check-no-failures systemd-pstore systemd-sysext indirect sssd-autofs sssd-kcm sssd-nss sssd-pac sssd-pam sssd-ssh sssd-sudo ------------------------------------------------------------ 13. Linux kernel boot-time arguments, from /proc/cmdline BOOT_IMAGE=(hd0,gpt2)/vmlinuz-5.14.0-70.13.1.el9_0.x86_64 root=/dev/mapper/rhel-root ro resume=/dev/mapper/rhel-swap rd.lvm.lv=rhel/root rd.lvm.lv=rhel/swap ------------------------------------------------------------ 14. cpupower frequency-info analyzing CPU 0: Unable to determine current policy boost state support: Supported: yes Active: yes ------------------------------------------------------------ 15. tuned-adm active Current active profile: accelerator-performance ------------------------------------------------------------ 16. sysctl kernel.numa_balancing 1 kernel.randomize_va_space 2 vm.compaction_proactiveness 20 vm.dirty_background_bytes 0 vm.dirty_background_ratio 10 vm.dirty_bytes 0 vm.dirty_expire_centisecs 3000 vm.dirty_ratio 40 vm.dirty_writeback_centisecs 500 vm.dirtytime_expire_seconds 43200 vm.extfrag_threshold 500 vm.min_unmapped_ratio 1 vm.nr_hugepages 0 vm.nr_hugepages_mempolicy 0 vm.nr_overcommit_hugepages 0 vm.swappiness 10 vm.watermark_boost_factor 15000 vm.watermark_scale_factor 10 vm.zone_reclaim_mode 0 ------------------------------------------------------------ 17. /sys/kernel/mm/transparent_hugepage defrag always defer defer+madvise [madvise] never enabled [always] madvise never hpage_pmd_size 2097152 shmem_enabled always within_size advise [never] deny force ------------------------------------------------------------ 18. /sys/kernel/mm/transparent_hugepage/khugepaged alloc_sleep_millisecs 60000 defrag 1 max_ptes_none 511 max_ptes_shared 256 max_ptes_swap 64 pages_to_scan 4096 scan_sleep_millisecs 10000 ------------------------------------------------------------ 19. OS release From /etc/*-release /etc/*-version os-release Red Hat Enterprise Linux 9.0 (Plow) redhat-release Red Hat Enterprise Linux release 9.0 (Plow) system-release Red Hat Enterprise Linux release 9.0 (Plow) ------------------------------------------------------------ 20. Disk information SPEC is set to: /home/cpu2017 Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/rhel-home xfs 372G 261G 112G 71% /home ------------------------------------------------------------ 21. /sys/devices/virtual/dmi/id Vendor: HPE Product: ProLiant DL560 Gen11 Product Family: ProLiant Serial: CNX2250G5V ------------------------------------------------------------ 22. dmidecode Additional information from dmidecode 3.3 follows. WARNING: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. Memory: 3x Samsung M321R4GA3BB0-CQKDG 32 GB 2 rank 4800 29x Samsung M321R4GA3BB6-CQKDG 32 GB 2 rank 4800 ------------------------------------------------------------ 23. BIOS (This section combines info from /sys/devices and dmidecode.) BIOS Vendor: HPE BIOS Version: 1.30 BIOS Date: 03/01/2023 BIOS Revision: 1.30 Firmware Revision: 1.30
============================================================================================================ C | 500.perlbench_r(base) 502.gcc_r(base) 505.mcf_r(base) 525.x264_r(base) 557.xz_r(base) ------------------------------------------------------------------------------------------------------------ Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2023.0.0 Build 20221201 Copyright (C) 1985-2022 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------------------------------------ ============================================================================================================ C++ | 520.omnetpp_r(base) 523.xalancbmk_r(base) 531.deepsjeng_r(base) 541.leela_r(base) ------------------------------------------------------------------------------------------------------------ Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2023.0.0 Build 20221201 Copyright (C) 1985-2022 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------------------------------------ ============================================================================================================ Fortran | 548.exchange2_r(base) ------------------------------------------------------------------------------------------------------------ Intel(R) Fortran Compiler for applications running on Intel(R) 64, Version 2023.0.0 Build 20221201 Copyright (C) 1985-2022 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------------------------------------
500.perlbench_r: | -DSPEC_LP64 -DSPEC_LINUX_X64 |
502.gcc_r: | -DSPEC_LP64 |
505.mcf_r: | -DSPEC_LP64 |
520.omnetpp_r: | -DSPEC_LP64 |
523.xalancbmk_r: | -DSPEC_LP64 -DSPEC_LINUX |
525.x264_r: | -DSPEC_LP64 |
531.deepsjeng_r: | -DSPEC_LP64 |
541.leela_r: | -DSPEC_LP64 |
548.exchange2_r: | -DSPEC_LP64 |
557.xz_r: | -DSPEC_LP64 |