SPEC CPU®2017 Floating Point Rate Result

Copyright 2017-2022 Standard Performance Evaluation Corporation

Tyrone Systems (Test Sponsor: Netweb Pte Ltd)

Tyrone Camarero SDI100C2R-28
(2.30 GHz,Intel Xeon Platinum 8380)

SPECrate®2017_fp_base = 22200

SPECrate®2017_fp_peak = 23000

CPU2017 License: 006042 Test Date: Aug-2022
Test Sponsor: Netweb Pte Ltd Hardware Availability: Apr-2021
Tested by: Tyrone Systems Software Availability: May-2022

Benchmark result graphs are available in the PDF report.

Hardware
CPU Name: Intel Xeon Platinum 8380
  Max MHz: 3400
  Nominal: 2300
Enabled: 80 cores, 2 chips, 2 threads/core
Orderable: 1,2 chips
Cache L1: 32 KB I + 48 KB D on chip per core
  L2: 1.25 MB I+D on chip per core
  L3: 60 MB I+D on chip per chip
  Other: None
Memory: 1 TB (16 x 64 GB 2Rx4 PC4-3200AA-R)
Storage: 1 x 512 GB NVMe SSD
Other: None
Software
OS: Red Hat Enterprise Linux release 8.5 (Ootpa)
Kernel 4.18.0-348.el8.x86_64
Compiler: C/C++: Version 2022.1 of Intel oneAPI DPC++/C++
Compiler for Linux;
Fortran: Version 2022.1 of Intel Fortran Compiler
for Linux;
Parallel: No
Firmware: Version 1.2b released Jun-2022
File System: xfs
System State: Run level 3 (multi-user)
Base Pointers: 64-bit
Peak Pointers: 64-bit
Other: jemalloc memory allocator V5.0.1
Power Management: BIOS and OS set to prefer performance at the
cost of additional power usage.

Results Table

Benchmark Base Peak
Copies Seconds Ratio Seconds Ratio Seconds Ratio Copies Seconds Ratio Seconds Ratio Seconds Ratio
SPECrate®2017_fp_base 22200
SPECrate®2017_fp_peak 23000
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
503.bwaves_r 160 1944 8260 3033 5290 4953 3240 160 1944 8260 3033 5290 4953 3240
507.cactuBSSN_r 160 1109 1830 1437 1410 2428 83.4 80 464 2180 1015 99.8 723 1400
508.namd_r 160 369 4120 365 4160 577 2640 160 369 4120 365 4160 577 2640
510.parest_r 160 5981 70.0 7759 53.9 15055 27.8 80 2072 1010 4250 49.2 2913 71.8
511.povray_r 160 601 6220 600 6230 601 6220 160 561 6660 574 6510 562 6650
519.lbm_r 160 1307 1290 2515 67.0 3372 50.0 160 1307 1290 2515 67.0 3372 50.0
521.wrf_r 160 2169 1650 4183 85.7 4900 73.1 80 1575 1140 3399 52.7 1973 90.8
526.blender_r 160 395 6160 627 3890 616 3960 160 395 6160 627 3890 616 3960
527.cam4_r 160 867 3230 2188 1280 1646 1700 80 607 2310 994 1410 585 2390
538.imagick_r 160 251 15900 297 13400 275 14500 160 251 15900 297 13400 275 14500
544.nab_r 160 227 11900 353 7640 226 11900 160 213 12700 413 6530 217 12400
549.fotonik3d_r 160 5713 1090 12156 51.3 6209 1000 160 5713 1090 12156 51.3 6209 1000
554.roms_r 160 5493 46.3 11379 22.3 4861 52.3 80 4055 31.3 3767 33.7 2612 48.7

Submit Notes

 The numactl mechanism was used to bind copies to processors. The config file option 'submit'
 was used to generate numactl commands to bind each copy to a specific processor.
 For details, please see the config file.

Operating System Notes

 Stack size set to unlimited using "ulimit -s unlimited"

Environment Variables Notes

Environment variables set by runcpu before the start of the run:
LD_LIBRARY_PATH = "/home/cpu2017/lib/intel64:/home/cpu2017/je5.0.1-64"
MALLOC_CONF = "retain:true"

General Notes

 Binaries compiled on a system with 2x Intel Xeon Platinum 8280M CPU + 384GB RAM
 memory using Red Hat Enterprise Linux 8.4
 Transparent Huge Pages enabled by default
 Prior to runcpu invocation
 Filesystem page cache synced and cleared with:
 sync; echo 3>       /proc/sys/vm/drop_caches
 runcpu command invoked through numactl i.e.:
 numactl --interleave=all runcpu <etc>
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the
system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the
system as tested and documented.
NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the
system as tested and documented.
 jemalloc, a general purpose malloc implementation
 built with the RedHat Enterprise 7.5, and the system compiler gcc 4.8.5
 sources available from jemalloc.net or https://github.com/jemalloc/jemalloc/releases

Platform Notes

BIOS Settings:
Power Technology = Custom
ENERGY_PERF_BIAS_CFG mode = Maximum Performance
SNC (Sub NUMA)= Enable
KTI Prefetch= Enable
LLC Dead Line Alloc = Disable
Hyper-Threading = Enabled

 Sysinfo program /home/cpu2017/bin/sysinfo
 Rev: r6622 of 2021-04-07 982a61ec0915b55891ef0e16acafc64d
 running on icelake3 Tue Aug 30 06:35:41 2022

 SUT (System Under Test) info as seen by some common utilities.
 For more information on this section, see
    https://www.spec.org/cpu2017/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz
       2  "physical id"s (chips)
       160 "processors"
    cores, siblings (Caution: counting these is hw and system dependent. The following
    excerpts from /proc/cpuinfo might not be reliable.  Use with caution.)
       cpu cores : 40
       siblings  : 80
       physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
       25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
       physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
       25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

 From lscpu from util-linux 2.32.1:
      Architecture:        x86_64
      CPU op-mode(s):      32-bit, 64-bit
      Byte Order:          Little Endian
      CPU(s):              160
      On-line CPU(s) list: 0-159
      Thread(s) per core:  2
      Core(s) per socket:  40
      Socket(s):           2
      NUMA node(s):        4
      Vendor ID:           GenuineIntel
      BIOS Vendor ID:      Intel(R) Corporation
      CPU family:          6
      Model:               106
      Model name:          Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz
      BIOS Model name:     Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz
      Stepping:            6
      CPU MHz:             2301.000
      CPU max MHz:         2301.0000
      CPU min MHz:         800.0000
      BogoMIPS:            4600.00
      Virtualization:      VT-x
      L1d cache:           48K
      L1i cache:           32K
      L2 cache:            1280K
      L3 cache:            61440K
      NUMA node0 CPU(s):   0-19,80-99
      NUMA node1 CPU(s):   20-39,100-119
      NUMA node2 CPU(s):   40-59,120-139
      NUMA node3 CPU(s):   60-79,140-159
      Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
      pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp
      lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid
      aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16
      xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave
      avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 invpcid_single
      intel_ppin ssbd mba ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept
      vpid ept_ad fsgsbase tsc_adjust sgx bmi1 hle avx2 smep bmi2 erms invpcid cqm rdt_a
      avx512f avx512dq rdseed adx smap avx512ifma clflushopt clwb intel_pt avx512cd sha_ni
      avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total
      cqm_mbm_local split_lock_detect wbnoinvd dtherm ida arat pln pts avx512vbmi umip pku
      ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg tme
      avx512_vpopcntdq la57 rdpid sgx_lc fsrm md_clear pconfig flush_l1d arch_capabilities

 /proc/cpuinfo cache data
    cache size : 61440 KB

 From numactl --hardware
 WARNING: a numactl 'node' might or might not correspond to a physical chip.
   available: 4 nodes (0-3)
   node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 80 81 82 83 84 85 86 87
   88 89 90 91 92 93 94 95 96 97 98 99
   node 0 size: 257625 MB
   node 0 free: 237555 MB
   node 1 cpus: 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 100 101 102
   103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119
   node 1 size: 258001 MB
   node 1 free: 242491 MB
   node 2 cpus: 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 120 121 122
   123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139
   node 2 size: 258039 MB
   node 2 free: 242362 MB
   node 3 cpus: 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 140 141 142
   143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159
   node 3 size: 258034 MB
   node 3 free: 242340 MB
   node distances:
   node   0   1   2   3
     0:  10  11  20  20
     1:  11  10  20  20
     2:  20  20  10  11
     3:  20  20  11  10

 From /proc/meminfo
    MemTotal:       1056462300 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 /sbin/tuned-adm active
     Current active profile: throughput-performance

 /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has
    performance

 From /etc/*release* /etc/*version*
    os-release:
       NAME="Red Hat Enterprise Linux"
       VERSION="8.5 (Ootpa)"
       ID="rhel"
       ID_LIKE="fedora"
       VERSION_ID="8.5"
       PLATFORM_ID="platform:el8"
       PRETTY_NAME="Red Hat Enterprise Linux 8.5 (Ootpa)"
       ANSI_COLOR="0;31"
    redhat-release: Red Hat Enterprise Linux release 8.5 (Ootpa)
    system-release: Red Hat Enterprise Linux release 8.5 (Ootpa)
    system-release-cpe: cpe:/o:redhat:enterprise_linux:8::baseos

 uname -a:
    Linux icelake3 4.18.0-348.el8.x86_64 #1 SMP Mon Oct 4 12:17:22 EDT 2021 x86_64 x86_64
    x86_64 GNU/Linux

 Kernel self-reported vulnerability status:

 CVE-2018-12207 (iTLB Multihit):                        Not affected
 CVE-2018-3620 (L1 Terminal Fault):                     Not affected
 Microarchitectural Data Sampling:                      Not affected
 CVE-2017-5754 (Meltdown):                              Not affected
 CVE-2018-3639 (Speculative Store Bypass):              Mitigation: Speculative Store
                                                        Bypass disabled via prctl and
                                                        seccomp
 CVE-2017-5753 (Spectre variant 1):                     Mitigation: usercopy/swapgs
                                                        barriers and __user pointer
                                                        sanitization
 CVE-2017-5715 (Spectre variant 2):                     Mitigation: Enhanced IBRS, IBPB:
                                                        conditional, RSB filling
 CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected
 CVE-2019-11135 (TSX Asynchronous Abort):               Not affected

 run-level 3 Aug 29 16:50

 SPEC is set to: /home/cpu2017
    Filesystem            Type  Size  Used Avail Use% Mounted on
    /dev/mapper/rhel-home xfs   402G   69G  333G  18% /home

 From /sys/devices/virtual/dmi/id
     Vendor:         Tyrone Systems
     Product:        Tyrone Camarero SDI100C2R-28
     Product Family: SMC X12
     Serial:         A444717X2418924

 Additional information from dmidecode 3.2 follows.  WARNING: Use caution when you
 interpret this section. The 'dmidecode' program reads system data which is "intended to
 allow hardware to be accurately determined", but the intent may not be met, as there are
 frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
   Memory:
     16x Samsung M393A8G40AB2-CWE 64 GB 2 rank 3200

 BIOS:
    BIOS Vendor:       American Megatrends International, LLC.
    BIOS Version:      1.2b
    BIOS Date:         06/01/2022
    BIOS Revision:     5.22

 (End of data from sysinfo program)

Compiler Version Notes

==============================================================================
C               | 519.lbm_r(base, peak) 538.imagick_r(base, peak)
                | 544.nab_r(base, peak)
------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

==============================================================================
C++             | 508.namd_r(base, peak) 510.parest_r(base, peak)
------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

==============================================================================
C++, C          | 511.povray_r(base, peak) 526.blender_r(base, peak)
------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

==============================================================================
C++, C, Fortran | 507.cactuBSSN_r(base, peak)
------------------------------------------------------------------------------
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
Intel(R) Fortran Compiler for applications running on Intel(R) 64, Version
  2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

==============================================================================
Fortran         | 503.bwaves_r(base, peak) 549.fotonik3d_r(base, peak)
                | 554.roms_r(base, peak)
------------------------------------------------------------------------------
Intel(R) Fortran Compiler for applications running on Intel(R) 64, Version
  2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

==============================================================================
Fortran, C      | 521.wrf_r(base, peak) 527.cam4_r(base, peak)
------------------------------------------------------------------------------
Intel(R) Fortran Compiler for applications running on Intel(R) 64, Version
  2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64,
  Version 2022.1.0 Build 20220316
Copyright (C) 1985-2022 Intel Corporation. All rights reserved.
------------------------------------------------------------------------------

Base Compiler Invocation

C benchmarks:

 icx 

C++ benchmarks:

 icpx 

Fortran benchmarks:

 ifx 

Benchmarks using both Fortran and C:

 ifx   icx 

Benchmarks using both C and C++:

 icpx   icx 

Benchmarks using Fortran, C, and C++:

 icpx   icx   ifx 

Base Portability Flags

503.bwaves_r:  -DSPEC_LP64 
507.cactuBSSN_r:  -DSPEC_LP64 
508.namd_r:  -DSPEC_LP64 
510.parest_r:  -DSPEC_LP64 
511.povray_r:  -DSPEC_LP64 
519.lbm_r:  -DSPEC_LP64 
521.wrf_r:  -DSPEC_LP64   -DSPEC_CASE_FLAG   -convert big_endian 
526.blender_r:  -DSPEC_LP64   -DSPEC_LINUX   -funsigned-char 
527.cam4_r:  -DSPEC_LP64   -DSPEC_CASE_FLAG 
538.imagick_r:  -DSPEC_LP64 
544.nab_r:  -DSPEC_LP64 
549.fotonik3d_r:  -DSPEC_LP64 
554.roms_r:  -DSPEC_LP64 

Base Optimization Flags

C benchmarks:

 -w   -std=c11   -m64   -Wl,-z,muldefs   -xCORE-AVX512   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

C++ benchmarks:

 -w   -m64   -Wl,-z,muldefs   -xCORE-AVX512   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

Fortran benchmarks:

 -w   -m64   -Wl,-z,muldefs   -xCORE-AVX512   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -auto   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

Benchmarks using both Fortran and C:

 -w   -m64   -std=c11   -Wl,-z,muldefs   -xCORE-AVX512   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -auto   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

Benchmarks using both C and C++:

 -w   -m64   -std=c11   -Wl,-z,muldefs   -xCORE-AVX512   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

Benchmarks using Fortran, C, and C++:

 -w   -m64   -std=c11   -Wl,-z,muldefs   -xCORE-AVX512   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -auto   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

Peak Compiler Invocation

C benchmarks:

 icx 

C++ benchmarks:

 icpx 

Fortran benchmarks:

 ifx 

Benchmarks using both Fortran and C:

 ifx   icx 

Benchmarks using both C and C++:

 icpx   icx 

Benchmarks using Fortran, C, and C++:

 icpx   icx   ifx 

Peak Portability Flags

Same as Base Portability Flags

Peak Optimization Flags

C benchmarks:

519.lbm_r:  basepeak = yes 
538.imagick_r:  basepeak = yes 
544.nab_r:  -w   -std=c11   -m64   -Wl,-z,muldefs   -xCORE-AVX512   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -qopt-zmm-usage=high   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

C++ benchmarks:

508.namd_r:  basepeak = yes 
510.parest_r:  -w   -m64   -Wl,-z,muldefs   -xCORE-AVX512   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

Fortran benchmarks:

503.bwaves_r:  basepeak = yes 
549.fotonik3d_r:  basepeak = yes 
554.roms_r:  -w   -m64   -Wl,-z,muldefs   -xCORE-AVX512   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -auto   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

Benchmarks using both Fortran and C:

 -w   -m64   -std=c11   -Wl,-z,muldefs   -xCORE-AVX512   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -auto   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

Benchmarks using both C and C++:

511.povray_r:  -w   -m64   -std=c11   -Wl,-z,muldefs   -fprofile-generate(pass 1)   -fprofile-use=default.profdata(pass 2)   -xCORE-AVX512   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 
526.blender_r:  basepeak = yes 

Benchmarks using Fortran, C, and C++:

 -w   -m64   -std=c11   -Wl,-z,muldefs   -xCORE-AVX512   -Ofast   -ffast-math   -flto   -mfpmath=sse   -funroll-loops   -qopt-mem-layout-trans=4   -nostandard-realloc-lhs   -align array32byte   -auto   -ljemalloc   -L/usr/local/jemalloc64-5.0.1/lib 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/Intel-ic2022-official-linux64_revA.html,
http://www.spec.org/cpu2017/flags/Tyrone-Platform-Settings-V1.2-ICX-revA.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/Intel-ic2022-official-linux64_revA.xml,
http://www.spec.org/cpu2017/flags/Tyrone-Platform-Settings-V1.2-ICX-revA.xml.