# Invocation command line: # /home/cpu2017-1.1.5-amd-aocc300-milan-B1/bin/harness/runcpu --configfile amd_speed_aocc300_milan_B1.cfg --tune all --reportable --iterations 3 --nopower --runmode speed --tune base:peak --size test:train:refspeed intspeed # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 300 SPEC CPU2017 V1.1.5 Speed Configuration File for 64-bit Linux # # File name : amd_speed_aocc300_milan_B1.cfg # Creation Date : February 23, 2021 # CPU2017 Version : 1.1.5 # Supported benchmarks : All Speed benchmarks (intspeed, fpspeed) # Compiler name/version : AOCC 3.0.0 # Operating system version : OpenSUSE 15.2 # Supported OS's : Ubuntu 20.04, RHEL 8.3, SLES 15 SP2 # Hardware : AMD Milan, Rome, Naples (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 64-bit # Auto Parallization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_speed_aocc300_milan_B1.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU2017 under optimized conditions on AMD Milan/Rome/Naples-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD Milan/Rome/Naples microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_speed_aocc300_milan_B1.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on two socket AMD # Milan/Rome/Naples-based servers with 64 cores per socket, SMT enabled and 1 TiB of DDR4 # memory distributed evenly among all 16 channels using 32 GiB DIMMs. # # To run the binary package on other Milan/Rome/Naples configurations, please review # "Readme.amd_speed_aocc300_milan_B1.txt". In general, Milan/Rome or Naples CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_speed_aocc300_milan_B1.cfg" or any # other file besides "ini_amd_speed_aocc300_milan_B1.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of speed copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 20.04, RHEL 8.3 and SLES 15 SP2. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ### add power options power_analyzer = WIN:9888 temp_meter = WIN:9889 ################################################################################ # Modifiable macros: ################################################################################ # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false # Only change these macros if you are rebuilding the binary package: %define compiler_name aocc300 %define binary_package_name amd_speed_%{compiler_name}_milan_B %define binary_package_revision 1 %define build_path /sppo/bin/cpu2017v115aocc3-b1/ %define flags_file_name %{compiler_name}-flags-B1.xml # To enable the platform file, be sure to uncomment the flagsurl02 header line # below. %define platform_file_name INVALID_platform_%{binary_package_name}.xml # You should never have to change binary_package_full_name: %define binary_package_full_name %{binary_package_name}%{binary_package_revision} ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name %{binary_package_full_name}.inc ################################################################################ # Binary label extension and "allow_build"" switch ################################################################################ # Only modify the binary label extension if you plan to rebuild the binaries. %define ext %{binary_package_name} # If you plan to recompile these CPU2017 binaries, please choose a new extension # name (ext above) to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true below. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # Necessary to avoid gcc out-of-memory exceptions on certain SUTs: preENV_MALLOC_CONF = retain:true # OpenMP environment variables: preENV_OMP_SCHEDULE = static preENV_OMP_DYNAMIC = false preENV_OMP_STACKSIZE = 128M # Define the name of the directory that holds AMD library files: %define lib_dir %{binary_package_name}_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/64;$[top]/%{lib_dir}/32:%{ENV_LD_LIBRARY_PATH} # Define 32-bit library build paths: # Do not use $[top] with the 32-bit libraries because doing so will cause an # options checksum error triggering a xalanc recompile attempt on SUTs having # different file paths: JEMALLOC_LIB32_PATH = %{build_path}%{lib_dir}/32 %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_speed_aocc300_milan_B1.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_speed_aocc300_milan_B1.inc # File generation code date: January 25, 2021 # File generation date/time: June 22, 2018 / 19:15:13 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 192 %define physical_core_count 96 %define physical_core_max 95 %define logical_core_max 191 ################################################################################ ################################################################################ # The following inc blocks set the speed thread counts and affinity settings. # # intspeed benchmarks: 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s, # 623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s, # 657.xz_s # fpspeed benchmarks: 603.bwaves_s,607.cactuBSSN_s,619.lbm_s,621.wrf_s, # 627.cam4_s,628.pop2_s,638.imagick_s,644.nab_s,649.fotonik3d_s, # 654.roms_s # # Selected thread counts from default section of CPU info (nothing for 7643, epyc24n, 48p, or 96l) ################################################################################ # default preENV thread settings: default: preENV_OMP_THREAD_LIMIT = 192 preENV_GOMP_CPU_AFFINITY = 0-191 ################################################################################ ################################################################################ # intspeed base thread counts: intspeed=base: threads = 96 ENV_GOMP_CPU_AFFINITY = 0-95 bind0 = numactl --physcpubind=0-95 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # fpspeed base thread counts: fpspeed=base: threads = 96 ENV_GOMP_CPU_AFFINITY = 0-95 bind0 = numactl --physcpubind=0-95 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 1 600.perlbench_s,602.gcc_s,605.mcf_s,620.omnetpp_s,623.xalancbmk_s,625.x264_s,631.deepsjeng_s,641.leela_s,648.exchange2_s=peak: threads = 1 ENV_GOMP_CPU_AFFINITY = 0 bind0 = numactl --physcpubind=0 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 192 603.bwaves_s,619.lbm_s,627.cam4_s,638.imagick_s,644.nab_s=peak: threads = 192 ENV_GOMP_CPU_AFFINITY = 0 96 1 97 2 98 3 99 4 100 5 101 6 102 7 103 8 104 9 105 10 106 11 107 12 108 13 109 14 110 15 111 16 112 17 113 18 114 19 115 20 116 21 117 22 118 23 119 24 120 25 121 26 122 27 123 28 124 29 125 30 126 31 127 32 128 33 129 34 130 35 131 36 132 37 133 38 134 39 135 40 136 41 137 42 138 43 139 44 140 45 141 46 142 47 143 48 144 49 145 50 146 51 147 52 148 53 149 54 150 55 151 56 152 57 153 58 154 59 155 60 156 61 157 62 158 63 159 64 160 65 161 66 162 67 163 68 164 69 165 70 166 71 167 72 168 73 169 74 170 75 171 76 172 77 173 78 174 79 175 80 176 81 177 82 178 83 179 84 180 85 181 86 182 87 183 88 184 89 185 90 186 91 187 92 188 93 189 94 190 95 191 bind0 = numactl --physcpubind=0-191 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak thread counts: 96 607.cactuBSSN_s,621.wrf_s,628.pop2_s,649.fotonik3d_s,654.roms_s,657.xz_s=peak: threads = 96 ENV_GOMP_CPU_AFFINITY = 0-95 bind0 = numactl --physcpubind=0-95 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ ################################################################################ # Switch back to default: default: ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =9017 tester =Lenovo Global Technology test_sponsor =Lenovo Global Technology hw_vendor =Lenovo Global Technology hw_model000 =ThinkSystem SR665 hw_model001 =2.30 GHz, AMD EPYC 7643 #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 3.0.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Apr-2021 sw_avail =Mar-2021 hw_cpu_name =AMD EPYC 7643 hw_cpu_nominal_mhz =2300 hw_cpu_max_mhz =3600 hw_ncores =96 hw_nthreadspercore =2 hw_ncpuorder =1,2 chips hw_other =None # Other perf-relevant hw, or "None" fw_bios =Lenovo BIOS Version D8E115E 2.01 released Mar-2021 sw_base_ptrsize =64-bit sw_peak_ptrsize = 64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =512 KB I+D on chip per core hw_tcache000 =256 MB I+D on chip per chip, hw_tcache001 = 32 MB shared / 6 cores hw_ocache =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 7742 CPU + 1TiB Memory using openSUSE 15.2 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_040 = notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_os_000 ='ulimit -s unlimited' was used to set environment stack size notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 =runcpu command invoked through numactl i.e.: notes_os_015 =numactl --interleave=all runcpu notes_os_020 ='echo 8 > /proc/sys/vm/dirty_ratio' run as root to limit dirty cache to 8% of notes_os_025 =memory. notes_os_030 ='echo 1 > /proc/sys/vm/swappiness' run as root to limit swap usage to minimum notes_os_035 =necessary. notes_os_040 ='echo 1 > /proc/sys/vm/zone_reclaim_mode' run as root to free node-local memory notes_os_045 =and avoid remote memory usage. notes_os_050 ='sync; echo 3 > /proc/sys/vm/drop_caches' run as root to reset filesystem caches. notes_os_055 ='sysctl -w kernel.randomize_va_space=0' run as root to disable address space layout notes_os_060 =randomization (ASLR) to reduce run-to-run variability. notes_os_016 =For peak, transparent huge pages set to 'never' for 627, 644, 649, 654 notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = notes_jemalloc_000 =jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified) notes_jemalloc_005 =jemalloc 5.1.0 is available here: notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 sw_other =jemalloc: jemalloc memory allocator library v5.1.0 ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (uncomment as necessary) # notes_plat_000 =BIOS settings: # notes_plat_002 = cTDP: 280 # notes_plat_004 = Determinism Slider set to Power # notes_plat_006 = Package Power: 280 # notes_plat_008 = EDC: 300 # notes_plat_010 = NPS: 1 # notes_plat_014 = 4-link xGMI max speed: 16Gbps # notes_plat_015 = Fan Speed: Maximum ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intrate: sw_peak_ptrsize =64-bit ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fprate: sw_peak_ptrsize =64-bit ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intrate,fprate: hw_disk =unknown hw_memory000 =1 TB (16 x 64 GB 4Rx4 PC4-3200V-L) hw_memory001 =running at 2933 hw_memory002 = hw_nchips =2 prepared_by =prepared by unknown sw_file =unknown file sw_os000 =unknown os000 sw_os001 =kernel version # ex: Kernel 4.4.0-87-generic sw_state =Run level 3 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/home/cpu2017-1.1.5-amd-aocc300-milan-B1/config/amd_speed_aocc300_milan_B1.inc' # Switch back to default block after the include file: default: fail_build = 1 %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{lib_dir}/64;$[top]/%{lib_dir}/32:%{ENV_LIBRARY_PATH} % define build_ncpus 64 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = yes flagsurl000 = http://www.spec.org/cpu2017/flags/Lenovo-Platform-SPECcpu2017-Flags-V1.2-Milan-E.xml flagsurl001 = http://www.spec.org/cpu2017/flags/aocc300-flags-A1.xml #flagsurl02 = $[top]/%{platform_file_name} # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak use_submit_for_speed = yes ################################################################################ # Compilers ################################################################################ default: CROSSPLAT_PORT_OPTS = -mno-adx -mno-sse4a CC = clang -m64 $[CROSSPLAT_PORT_OPTS] CXX = clang++ -m64 -std=c++98 $[CROSSPLAT_PORT_OPTS] FC = flang -m64 $[CROSSPLAT_PORT_OPTS] CLD = clang -m64 CXXLD = clang++ -m64 FLD = flang -m64 CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default:# data model applies to all benchmarks ################################################################################ # Default Flags ################################################################################ EXTRA_LIBS = -fopenmp=libomp -lomp -ljemalloc -lamdlibm -lm MATHLIBOPT = #clearing this variable or else SPEC will set it to -lm VECMATHLIB = -fveclib=AMDLIBM OPT_ROOT = -march=znver3 $(VECMATHLIB) -ffast-math OPT_ROOT_BASE = -O3 $(OPT_ROOT) OPT_ROOT_PEAK = -Ofast $(OPT_ROOT) -flto ################################################################################ # Portability Flags ################################################################################ default: EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: COPTIMIZE = $(OPT_ROOT_BASE) -flto -fstruct-layout=5 \ -mllvm -unroll-threshold=50 \ -mllvm -inline-threshold=1000 -fremap-arrays \ -mllvm -function-specialize -flv-function-specialization \ -mllvm -enable-gvn-hoist \ -mllvm -global-vectorize-slp=true \ -mllvm -enable-licm-vrp \ -mllvm -reduce-array-computations=3 \ -Wno-unused-command-line-argument CXXOPTIMIZE = $(OPT_ROOT_BASE) -flto \ -mllvm -enable-partial-unswitch \ -mllvm -unroll-threshold=100 \ -finline-aggressive -flv-function-specialization \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -reroll-loops \ -mllvm -aggressive-loop-unswitch \ -mllvm -extra-vectorizer-passes \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -Wno-unused-command-line-argument \ -mllvm -convert-pow-exp-to-int=false FOPTIMIZE = -Hz,1,0x1 $(OPT_ROOT_BASE) -Mrecursive \ -mllvm -fuse-tile-inner-loop -funroll-loops \ -mllvm -extra-vectorizer-passes \ -mllvm -lsr-in-nested-loop \ -mllvm -enable-licm-vrp \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -Wno-unused-command-line-argument LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false EXTRA_LDFLAGS = -Wl,-mllvm -Wl,-region-vectorize \ -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching \ -Wl,-mllvm -Wl,-enable-licm-vrp #other libraries # Put OpenMP and math libraries here: # -lm needed at the end for some transcendental functions: EXTRA_LIBS = -fopenmp=libomp -lomp -lamdlibm -ljemalloc -lflang -lflangrti -lm EXTRA_FLIBS = # Don't put the AMD and mvec math libraries in MATHLIBOPT because it will trigger a reporting issue # because GCC won't use them. Forcefeed all benchmarks the math libraries in EXTRA_LIBS and clear # out MATHLIBOPT. MATHLIBOPT = # The following is necessary for 502/602 gcc: LDOPTIMIZE = -z muldefs # The following is necessary for 502/602 gcc: EXTRA_OPTIMIZE = -DSPEC_OPENMP -fopenmp -Wno-return-type ######################## # intspeed tuning flags # ######################## intspeed: FOPTIMIZE = $(OPT_ROOT_BASE) -flto EXTRA_FFLAGS = -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 EXTRA_CXXFLAGS = -mllvm -do-block-reorder=aggressive \ -fvirtual-function-elimination -fvisibility=hidden LDCFLAGS = -Wl,-allow-multiple-definition -Wl,-mllvm \ -Wl,-enable-licm-vrp LDCXXFLAGS = -Wl,-mllvm -Wl,-do-block-reorder=aggressive LDFFLAGS = -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split intspeed=base: submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command intspeed=peak: submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ######################## # fpspeed tuning flags # ######################## fpspeed: CXX = clang++ -m64 -std=c++98 $[CROSSPLAT_PORT_OPTS] fpspeed=base: submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command fpspeed=peak: submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command ##################### # Peak tuning flags # ##################### default=peak: COPTIMIZE = $(OPT_ROOT_PEAK) -fstruct-layout=5 \ -mllvm -unroll-threshold=50 -fremap-arrays \ -flv-function-specialization -mllvm \ -inline-threshold=1000 -mllvm -enable-gvn-hoist \ -mllvm -global-vectorize-slp=true -mllvm \ -function-specialize -mllvm -enable-licm-vrp \ -mllvm -reduce-array-computations=3 \ -Wno-unused-command-line-argument CXXOPTIMIZE = $(OPT_ROOT_PEAK) -finline-aggressive \ -mllvm -unroll-threshold=100 \ -flv-function-specialization -mllvm -enable-licm-vrp \ -mllvm -reroll-loops -mllvm \ -aggressive-loop-unswitch -mllvm \ -reduce-array-computations=3 -mllvm \ -global-vectorize-slp=true \ -Wno-unused-command-line-argument FOPTIMIZE = $(OPT_ROOT_PEAK) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -mllvm -enable-licm-vrp \ -Wno-unused-command-line-argument EXTRA_LDFLAGS = -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6 \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching \ -Wl,-mllvm -Wl,-enable-licm-vrp LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false \ -Wl,-mllvm -Wl,-enable-licm-vrp EXTRA_LIBS = -fopenmp=libomp -lomp -lamdlibm -ljemalloc -lflang -lm EXTRA_OPTIMIZE = -DSPEC_OPENMP -fopenmp -Wno-return-type feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge --output=default.profdata *.profraw # Int benchmark specific peak tuning flags: # FP benchmark specific peak tuning flags: 603.bwaves_s=peak: FOPTIMIZE = -Ofast $(OPT_ROOT) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -mllvm -enable-licm-vrp \ -Wno-unused-command-line-argument submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command 607.cactuBSSN_s=peak: submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command 621.wrf_s=peak: FOPTIMIZE = -Hz,1,0x1 $(OPT_ROOT_BASE) -Mrecursive \ -mllvm -fuse-tile-inner-loop -funroll-loops \ -mllvm -extra-vectorizer-passes \ -mllvm -lsr-in-nested-loop \ -mllvm -enable-licm-vrp \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -Wno-unused-command-line-argument submit = echo always > /sys/kernel/mm/transparent_hugepage/enabled; numactl --interleave=all --physcpubind=0-%{physical_core_max} $command 627.cam4_s=peak: submit = echo never > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command 628.pop2_s=peak: FOPTIMIZE = $(OPT_ROOT) -Ofast -Mrecursive \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -mllvm -enable-licm-vrp \ -Wno-unused-command-line-argument submit = echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command 638.imagick_s=peak: submit = echo madvise > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command 644.nab_s=peak: EXTRA_LDFLAGS = -Wl,-mllvm -Wl,-region-vectorize \ -Wl,-mllvm -Wl,-function-specialize submit = echo never > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command 649.fotonik3d_s=peak: ENV_PGHPF_ZMEM =yes submit = echo never > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command 654.roms_s=peak: FOPTIMIZE = -Ofast $(OPT_ROOT) -Mrecursive \ -mllvm -reduce-array-computations=3 \ -mllvm -global-vectorize-slp=true \ -mllvm -enable-licm-vrp \ -Wno-unused-command-line-argument submit = echo never > /sys/kernel/mm/transparent_hugepage/enabled; $BIND $command # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:60a26e139a7df7ba5521c983304469c762a79f3394ac112dddae4bac7d1a4f55) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /home/cpu2017-1.1.5-amd-aocc300-milan-B1/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6538 of 2020-09-24 e8664e66d2d7080afeaa89d4b38e2f1c notes_plat_sysinfo_015 = running on localhost.localdomain Fri Jun 22 19:15:22 2018 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = For more information on this section, see notes_plat_sysinfo_035 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : AMD EPYC 7643 48-Core Processor notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 192 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_070 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_075 = cpu cores : 48 notes_plat_sysinfo_080 = siblings : 96 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 27 28 29 notes_plat_sysinfo_090 = 32 33 34 35 36 37 40 41 42 43 44 45 48 49 50 51 52 53 56 57 58 59 60 61 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 27 28 29 notes_plat_sysinfo_100 = 32 33 34 35 36 37 40 41 42 43 44 45 48 49 50 51 52 53 56 57 58 59 60 61 notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From lscpu: notes_plat_sysinfo_115 = Architecture: x86_64 notes_plat_sysinfo_120 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_125 = Byte Order: Little Endian notes_plat_sysinfo_130 = CPU(s): 192 notes_plat_sysinfo_135 = On-line CPU(s) list: 0-191 notes_plat_sysinfo_140 = Thread(s) per core: 2 notes_plat_sysinfo_145 = Core(s) per socket: 48 notes_plat_sysinfo_150 = Socket(s): 2 notes_plat_sysinfo_155 = NUMA node(s): 4 notes_plat_sysinfo_160 = Vendor ID: AuthenticAMD notes_plat_sysinfo_165 = CPU family: 25 notes_plat_sysinfo_170 = Model: 1 notes_plat_sysinfo_175 = Model name: AMD EPYC 7643 48-Core Processor notes_plat_sysinfo_180 = Stepping: 1 notes_plat_sysinfo_185 = CPU MHz: 3025.861 notes_plat_sysinfo_190 = CPU max MHz: 2300.0000 notes_plat_sysinfo_195 = CPU min MHz: 1500.0000 notes_plat_sysinfo_200 = BogoMIPS: 4591.70 notes_plat_sysinfo_205 = Virtualization: AMD-V notes_plat_sysinfo_210 = L1d cache: 32K notes_plat_sysinfo_215 = L1i cache: 32K notes_plat_sysinfo_220 = L2 cache: 512K notes_plat_sysinfo_225 = L3 cache: 32768K notes_plat_sysinfo_230 = NUMA node0 CPU(s): 0-23,96-119 notes_plat_sysinfo_235 = NUMA node1 CPU(s): 24-47,120-143 notes_plat_sysinfo_240 = NUMA node2 CPU(s): 48-71,144-167 notes_plat_sysinfo_245 = NUMA node3 CPU(s): 72-95,168-191 notes_plat_sysinfo_250 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov notes_plat_sysinfo_255 = pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm notes_plat_sysinfo_260 = constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq notes_plat_sysinfo_265 = monitor ssse3 fma cx16 pcid sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand notes_plat_sysinfo_270 = lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw notes_plat_sysinfo_275 = ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb notes_plat_sysinfo_280 = cat_l3 cdp_l3 invpcid_single hw_pstate sme ssbd mba sev ibrs ibpb stibp vmmcall notes_plat_sysinfo_285 = fsgsbase bmi1 avx2 smep bmi2 erms invpcid cqm rdt_a rdseed adx smap clflushopt clwb notes_plat_sysinfo_290 = sha_ni xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total notes_plat_sysinfo_295 = cqm_mbm_local clzero irperf xsaveerptr wbnoinvd amd_ppin arat npt lbrv svm_lock notes_plat_sysinfo_300 = nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold notes_plat_sysinfo_305 = v_vmsave_vmload vgif umip pku ospke vaes vpclmulqdq rdpid overflow_recov succor smca notes_plat_sysinfo_310 = notes_plat_sysinfo_315 = /proc/cpuinfo cache data notes_plat_sysinfo_320 = cache size : 512 KB notes_plat_sysinfo_325 = notes_plat_sysinfo_330 = From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a notes_plat_sysinfo_335 = physical chip. notes_plat_sysinfo_340 = available: 4 nodes (0-3) notes_plat_sysinfo_345 = node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 96 97 98 99 notes_plat_sysinfo_350 = 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 notes_plat_sysinfo_355 = node 0 size: 128741 MB notes_plat_sysinfo_360 = node 0 free: 128325 MB notes_plat_sysinfo_365 = node 1 cpus: 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 notes_plat_sysinfo_370 = 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 notes_plat_sysinfo_375 = 142 143 notes_plat_sysinfo_380 = node 1 size: 128909 MB notes_plat_sysinfo_385 = node 1 free: 128217 MB notes_plat_sysinfo_390 = node 2 cpus: 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 notes_plat_sysinfo_395 = 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 notes_plat_sysinfo_400 = 166 167 notes_plat_sysinfo_405 = node 2 size: 128813 MB notes_plat_sysinfo_410 = node 2 free: 128617 MB notes_plat_sysinfo_415 = node 3 cpus: 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 notes_plat_sysinfo_420 = 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 notes_plat_sysinfo_425 = 190 191 notes_plat_sysinfo_430 = node 3 size: 128785 MB notes_plat_sysinfo_435 = node 3 free: 128487 MB notes_plat_sysinfo_440 = node distances: notes_plat_sysinfo_445 = node 0 1 2 3 notes_plat_sysinfo_450 = 0: 10 12 32 32 notes_plat_sysinfo_455 = 1: 12 10 32 32 notes_plat_sysinfo_460 = 2: 32 32 10 12 notes_plat_sysinfo_465 = 3: 32 32 12 10 notes_plat_sysinfo_470 = notes_plat_sysinfo_475 = From /proc/meminfo notes_plat_sysinfo_480 = MemTotal: 528184936 kB notes_plat_sysinfo_485 = HugePages_Total: 0 notes_plat_sysinfo_490 = Hugepagesize: 2048 kB notes_plat_sysinfo_495 = notes_plat_sysinfo_500 = /sbin/tuned-adm active notes_plat_sysinfo_505 = Current active profile: throughput-performance notes_plat_sysinfo_510 = notes_plat_sysinfo_515 = /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has notes_plat_sysinfo_520 = performance notes_plat_sysinfo_525 = notes_plat_sysinfo_530 = From /etc/*release* /etc/*version* notes_plat_sysinfo_535 = os-release: notes_plat_sysinfo_540 = NAME="Red Hat Enterprise Linux" notes_plat_sysinfo_545 = VERSION="8.3 (Ootpa)" notes_plat_sysinfo_550 = ID="rhel" notes_plat_sysinfo_555 = ID_LIKE="fedora" notes_plat_sysinfo_560 = VERSION_ID="8.3" notes_plat_sysinfo_565 = PLATFORM_ID="platform:el8" notes_plat_sysinfo_570 = PRETTY_NAME="Red Hat Enterprise Linux 8.3 (Ootpa)" notes_plat_sysinfo_575 = ANSI_COLOR="0;31" notes_plat_sysinfo_580 = redhat-release: Red Hat Enterprise Linux release 8.3 (Ootpa) notes_plat_sysinfo_585 = system-release: Red Hat Enterprise Linux release 8.3 (Ootpa) notes_plat_sysinfo_590 = system-release-cpe: cpe:/o:redhat:enterprise_linux:8.3:ga notes_plat_sysinfo_595 = notes_plat_sysinfo_600 = uname -a: notes_plat_sysinfo_605 = Linux localhost.localdomain 4.18.0-240.el8.x86_64 #1 SMP Wed Sep 23 05:13:10 EDT 2020 notes_plat_sysinfo_610 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_615 = notes_plat_sysinfo_620 = Kernel self-reported vulnerability status: notes_plat_sysinfo_625 = notes_plat_sysinfo_630 = CVE-2018-12207 (iTLB Multihit): Not affected notes_plat_sysinfo_635 = CVE-2018-3620 (L1 Terminal Fault): Not affected notes_plat_sysinfo_640 = Microarchitectural Data Sampling: Not affected notes_plat_sysinfo_645 = CVE-2017-5754 (Meltdown): Not affected notes_plat_sysinfo_650 = CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store notes_plat_sysinfo_655 = Bypass disabled via prctl and notes_plat_sysinfo_660 = seccomp notes_plat_sysinfo_665 = CVE-2017-5753 (Spectre variant 1): Mitigation: usercopy/swapgs notes_plat_sysinfo_670 = barriers and __user pointer notes_plat_sysinfo_675 = sanitization notes_plat_sysinfo_680 = CVE-2017-5715 (Spectre variant 2): Mitigation: Full AMD retpoline, notes_plat_sysinfo_685 = IBPB: conditional, IBRS_FW, STIBP: notes_plat_sysinfo_690 = always-on, RSB filling notes_plat_sysinfo_695 = CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected notes_plat_sysinfo_700 = CVE-2019-11135 (TSX Asynchronous Abort): Not affected notes_plat_sysinfo_705 = notes_plat_sysinfo_710 = run-level 3 Jun 22 19:12 notes_plat_sysinfo_715 = notes_plat_sysinfo_720 = SPEC is set to: /home/cpu2017-1.1.5-amd-aocc300-milan-B1 notes_plat_sysinfo_725 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_730 = /dev/sda4 xfs 819G 100G 719G 13% /home notes_plat_sysinfo_735 = notes_plat_sysinfo_740 = From /sys/devices/virtual/dmi/id notes_plat_sysinfo_745 = Vendor: Lenovo notes_plat_sysinfo_750 = Product: ThinkSystem SR665 MB notes_plat_sysinfo_755 = Product Family: ThinkSystem notes_plat_sysinfo_760 = Serial: 1234567890 notes_plat_sysinfo_765 = notes_plat_sysinfo_770 = Additional information from dmidecode follows. WARNING: Use caution when you interpret notes_plat_sysinfo_775 = this section. The 'dmidecode' program reads system data which is "intended to allow notes_plat_sysinfo_780 = hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_785 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_790 = Memory: notes_plat_sysinfo_795 = 16x Samsung M393A4K40DB3-CWE 32 GB 2 rank 3200 notes_plat_sysinfo_800 = 16x Unknown Unknown notes_plat_sysinfo_805 = notes_plat_sysinfo_810 = BIOS: notes_plat_sysinfo_815 = BIOS Vendor: Lenovo notes_plat_sysinfo_820 = BIOS Version: D8E115E-2.01 notes_plat_sysinfo_825 = BIOS Date: 03/04/2021 notes_plat_sysinfo_830 = BIOS Revision: 2.1 notes_plat_sysinfo_835 = Firmware Revision: 3.1 notes_plat_sysinfo_840 = notes_plat_sysinfo_845 = (End of data from sysinfo program) hw_cpu_name = AMD EPYC 7643 hw_disk = 1 x 960 GB SATA SSD hw_memory = 512 GB (16 x 32 GB 2Rx4 PC4-3200AA-R) hw_nchips = 2 prepared_by = Lenovo Global Technology sw_file = xfs sw_os000 = Red Hat Enterprise Linux 8.3 (Ootpa) sw_os001 = Kernel 4.18.0-240.el8.x86_64 sw_state = Run level 3 (multi-user) # End of settings added by sysinfo_program 631.deepsjeng_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 623.xalancbmk_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 620.omnetpp_s: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: power_management000 = BIOS set to prefer performance at the cost of power_management001 = additional power usage notes_os_thp_000 =To enable Transparent Hugepages (THP) for all allocations, notes_os_thp_005 ='echo always > /sys/kernel/mm/transparent_hugepage/enabled' and notes_os_thp_010 ='echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root. notes_plat_form_000 =BIOS configuration: notes_plat_form_005 =Operating Mode set to Maximum Performance and then set it to Custom Mode notes_plat_form_010 =4-Link xGMI Max Speed set to 16Gbps notes_plat_form_015 =SOC P-States set to P0 notes_plat_form_020 =NUMA nodes per socket set to NPS2