# Invocation command line: # /home/SPECcpu2006/bin/runspec --define default-platform-flags -c cpu2006.1.2.ic15.linux64.avx2.speed.29aug2014.cfg --define cores=16 --define THP_enabled -T all -o all fp # output_root was not used for this run ############################################################################ ############################################################################ # This is a sample config file. It was tested with: # # Compiler name/version: Intel Compiler 15 # Operating system version: 64-Bit RedHat Enterprise Linux64 6.4 # Hardware: Intel processors supporting AVX2 # ############################################################################ # SPEC CPU2006 Intel Linux64 config file # Aug 2014 Intel Compiler 15 for Linux64 ############################################################################ action = validate tune = base,peak # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## %define version 29aug2014 ext = cpu2006.1.2.ic15.linux64.avx2.speed.%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # fail_build=1 PATHSEP = / check_md5=1 reportable=1 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6914 -p -f use_submit_for_speed=1 flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic15.0-official-linux64.xml %ifdef %{default-platform-flags} flagsurl001=http://www.spec.org/cpu2006/flags/Fujitsu-Platform-Settings-V1.2-HSW-RevA.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh preENV_OMP_NUM_THREADS = %{cores} %ifdef %{intspeed} preENV_KMP_AFFINITY = granularity=fine,scatter %else preENV_KMP_AFFINITY = granularity=fine,compact,1,0 %endif # # These are listed as benchmark-tuning-extension-machine # int=default=default=default: CC= icc -m64 CXX= icpc -m64 OBJ = .o SMARTHEAP32_DIR = /sh SMARTHEAP64_DIR = /sh fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o #################################################################### # Compiler options # for Nehalem use -xSSE4.2 # for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3 #################################################################### default: SSE = -xCORE-AVX2 FASTNOSTATIC = $(SSE) -ipo -O3 -no-prec-div FAST = $(SSE) -ipo -O3 -no-prec-div ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ default: PORTABILITY = -DSPEC_CPU_LP64 400.perlbench=default: CPORTABILITY = -DSPEC_CPU_LINUX_X64 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default=default=default: CXXPORTABILITY= -DSPEC_CPU_LINUX 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX ################################################################ # Tuning Flags ################################################################ ################################################################ # Base tuning default optimization # Feedback directed optimization not allowed in baseline for CPU2006 # However there is no limit on the number of flags as long as the same # flags are used in the same order for all benchmarks of a given language ################################################################ 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP64_DIR) -lsmartheap64 EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FASTNOSTATIC) -parallel -opt-prefetch -auto-p32 CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -auto-p32 fp=base=default=default: FOPTIMIZE= $(FAST) -parallel -opt-prefetch COPTIMIZE= $(FAST) -parallel -opt-prefetch -ansi-alias CXXOPTIMIZE= $(FAST) -opt-prefetch -ansi-alias ################################################################ # Peak Tuning Flags int 2005 fast ################################################################ int=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDCXXFLAGS = -prof-gen PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use 400.perlbench,401.bzip2,429.mcf,445.gobmk,458.sjeng,464.h264ref,471.omnetpp,473.astar,483.xalancbmk=peak: submit = taskset -c $SPECCOPYNUM $command 400.perlbench=peak=default: CC= icc -m32 -L/opt/intel/composer_xe_2015/lib/ia32 PORTABILITY= CPORTABILITY = -DSPEC_CPU_LINUX_IA32 COPTIMIZE= -opt-prefetch -ansi-alias 401.bzip2=peak=default: COPTIMIZE= -auto-ilp32 -opt-prefetch -no-prec-div -ansi-alias 403.gcc=peak=default: COPTIMIZE= $(FASTNOSTATIC) -inline-calloc -opt-malloc-options=3 -auto-ilp32 feedback=0 429.mcf=peak=default: COPTIMIZE= $(FASTNOSTATIC) -parallel -opt-prefetch -auto-p32 feedback=0 submit = taskset -c $SPECCOPYNUM $command 445.gobmk=peak=default: CC= icc -m32 -L/opt/intel/composer_xe_2015/lib/ia32 PORTABILITY= COPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: COPTIMIZE= $(FASTNOSTATIC) -unroll2 -auto-ilp32 -ansi-alias feedback=0 458.sjeng=peak=default: COPTIMIZE= -unroll4 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: basepeak=yes 471.omnetpp=peak=default: CXX= icpc -m32 -L/opt/intel/composer_xe_2015/lib/ia32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= CXXOPTIMIZE= -opt-ra-region-strategy=block -ansi-alias 473.astar=peak=default: CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -auto-p32 feedback=0 submit = taskset -c $SPECCOPYNUM $command 483.xalancbmk=peak=default: CXX= icpc -m32 -L/opt/intel/composer_xe_2015/lib/ia32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= CXXOPTIMIZE= $(FASTNOSTATIC) -opt-prefetch -ansi-alias feedback=no ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -auto-ilp32 -ansi-alias PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = $(FASTNOSTATIC) -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = $(FASTNOSTATIC) -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = $(FASTNOSTATIC) -prof-use 410.bwaves=peak=default: basepeak=yes 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: OPTIMIZE= 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: basepeak=yes 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: basepeak=yes 444.namd=peak=default: OPTIMIZE= -fno-alias CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: basepeak=yes 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: OPTIMIZE= $(FASTNOSTATIC) feedback=0 459.GemsFDTD=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -opt-prefetch -parallel 465.tonto=peak=default: OPTIMIZE= -inline-calloc -opt-malloc-options=3 -auto -unroll4 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: OPTIMIZE= $(FASTNOSTATIC) COPTIMIZE= -unroll2 -ansi-alias -parallel feedback=no ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: #include: SUT-speed.conf # ----- Begin inclusion of 'SUT-speed.conf' ############################################################################ default=default=default=default: license_num = 19 test_sponsor = Fujitsu hw_avail = Feb-2015 sw_avail = Sep-2014 tester = Fujitsu hw_memory = 256 GB (16 x 16 GB 2Rx4 PC4-2133P-R) hw_disk = 1 x SATA, 500 GB, 7200 RPM hw_fpu = Integrated hw_ncpuorder = 1,2 chip hw_vendor = Fujitsu sw_file = xfs hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 20 MB I+D on chip per chip hw_ocache = None hw_other = None hw_nthreadspercore = 2 prepared_by = Fujitsu sw_os000 = Red Hat Enterprise Linux Server release 7.0 sw_os001 = (Maipo) sw_os002 = Kernel 3.10.0-123.8.1.el7.x86_64 sw_state = Run level 3 (multi-user) notes_plat_000 = BIOS configuration: notes_plat_005 = Energy Performance = Performance notes_plat_010 = Utilization Profile = Unbalanced notes_plat_015 = QPI snoop mode: Home Snoop notes_plat_020 = COD Enable = Disabled, Early Snoop = Disabled notes_plat_025 = CPU C1E Support = Disabled notes_035 = notes_040 = For information about Fujitsu please visit: http://www.fujitsu.com hw_cpu_name = Intel Xeon E5-2630 v3 hw_cpu_char = Intel Turbo Boost Technology up to 3.20 GHz hw_cpu_mhz = 2400 hw_model = PRIMERGY RX2530 M1, Intel Xeon E5-2630 v3, 2.4 GHz hw_ncores = 16 hw_nchips = 2 hw_ncoresperchip = 8 hw_nthreadspercore = 2 hw_tcache = 20 MB I+D on chip per chip hw_memory000 = 256 GB (16 x 16 GB 2Rx4 PC4-2133P-R, running at hw_memory001 = 1866 MHz) # ---- End inclusion of '/home/SPECcpu2006/config/SUT-speed.conf' notes_025 = Binaries compiled on a system with 1x Core i5-4670K CPU + 16GB notes_030 = memory using RedHat EL 7.0 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" int=default=default=default: sw_compiler001 = C/C++: Version 15.0.0.090 of Intel C++ Studio XE sw_compiler002 = for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sw_other001 = Microquill SmartHeap V10.0 default: %ifdef %{THP_enabled} #notes_200 = Transparent Huge Pages enabled with: #notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %endif %ifdef %{THP_disabled} notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %endif %ifdef %{drop_caches} notes_202 = Filesystem page cache cleared with: notes_203 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_204 = runspec command invoked through numactl i.e.: notes_205 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler000 = C/C++: Version 15.0.0.090 of Intel C++ Studio XE sw_compiler001 = for Linux; sw_compiler002 = Fortran: Version 15.0.0.090 of Intel Fortran sw_compiler003 = Studio XE for Linux sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit sw_other = None # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6914 -p -f' default: # Sysinfo program /home/SPECcpu2006/config/sysinfo.rev6914 # $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1 # running on RX2530 M1 Tue Feb 10 14:17:42 2015 # # This section contains SUT (System Under Test) info as seen by # some common utilities. To remove or add to this section, see: # http://www.spec.org/cpu2006/Docs/config.html#sysinfo # # From /proc/cpuinfo # model name : Intel(R) Xeon(R) CPU E5-2630 v3 @ 2.40GHz # 2 "physical id"s (chips) # 32 "processors" # cores, siblings (Caution: counting these is hw and system dependent. The # following excerpts from /proc/cpuinfo might not be reliable. Use with # caution.) # cpu cores : 8 # siblings : 16 # physical 0: cores 0 1 2 3 4 5 6 7 # physical 1: cores 0 1 2 3 4 5 6 7 # cache size : 20480 KB # # From /proc/meminfo # MemTotal: 263839240 kB # HugePages_Total: 0 # Hugepagesize: 2048 kB # # From /etc/*release* /etc/*version* # os-release: # NAME="Red Hat Enterprise Linux Server" # VERSION="7.0 (Maipo)" # ID="rhel" # ID_LIKE="fedora" # VERSION_ID="7.0" # PRETTY_NAME="Red Hat Enterprise Linux Server 7.0 (Maipo)" # ANSI_COLOR="0;31" # CPE_NAME="cpe:/o:redhat:enterprise_linux:7.0:GA:server" # redhat-release: Red Hat Enterprise Linux Server release 7.0 (Maipo) # system-release: Red Hat Enterprise Linux Server release 7.0 (Maipo) # system-release-cpe: cpe:/o:redhat:enterprise_linux:7.0:ga:server # # uname -a: # Linux RX2530 M1 3.10.0-123.8.1.el7.x86_64 #1 SMP Mon Aug 11 13:37:49 EDT 2014 # x86_64 x86_64 x86_64 GNU/Linux # # run-level 3 Feb 10 08:09 # # SPEC is set to: /home/SPECcpu2006 # Filesystem Type Size Used Avail Use% Mounted on # /dev/mapper/rhel_rx2540m1-home xfs 412G 5.1G 407G 2% /home # Additional information from dmidecode: # # Warning: Use caution when you interpret this section. The 'dmidecode' program # reads system data which is "intended to allow hardware to be accurately # determined", but the intent may not be met, as there are frequent changes to # hardware, firmware, and the "DMTF SMBIOS" standard. # # BIOS FUJITSU // American Megatrends Inc. V5.0.0.9 R1.14.0 for D3279-A1x # 12/04/2014 # Memory: # 8x NO DIMM NO DIMM # 16x Samsung M393A2G40DB0-CPB 16 GB 2 rank 2133 MHz, configured at 1866 MHz # # (End of data from sysinfo program) # hw_cpu_name = Intel Xeon E5-2630 v3 # hw_disk = 412 GB add more disk info here # hw_memory001 = 251.617 GB fixme: If using DDR3, format is: # hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' # hw_nchips = 2 # prepared_by = root (is never output, only tags rawfile) # sw_file = xfs # sw_os001 = Red Hat Enterprise Linux Server release 7.0 (Maipo) # sw_os002 = 3.10.0-123.8.1.el7.x86_64 # sw_state = Run level 3 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. 482.sphinx3: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =KMP_AFFINITY = "granularity=fine,compact,1,0" notes_010 =LD_LIBRARY_PATH = "/home/SPECcpu2006/libs/32:/home/SPECcpu2006/libs/64:/home/SPECcpu2006/sh" notes_015 =OMP_NUM_THREADS = "16" notes_020 =