CPU2006 license: | 19 | Test date: | Aug-2014 |
---|---|---|---|
Test sponsor: | Fujitsu | Hardware Availability: | Sep-2014 |
Tested by: | Fujitsu | Software Availability: | Sep-2013 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E5-2699 v3 |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.60 GHz |
CPU MHz: | 2300 |
FPU: | Integrated |
CPU(s) enabled: | 36 cores, 2 chips, 18 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chip |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 45 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 256 GB (16 x 16 GB 2Rx4 PC4-2133P-R) |
Disk Subsystem: | 1 x SATA, 500 GB, 7200 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 6.5 (Santiago) 2.6.32-431.el6.x86_64 |
Compiler: | C/C++: Version 14.0.0.080 of Intel C++ Studio XE for Linux |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V10.0 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 72 | 597 | 1180 | 594 | 1180 | 601 | 1170 | 72 | 492 | 1430 | 493 | 1430 | 491 | 1430 |
401.bzip2 | 72 | 935 | 743 | 935 | 743 | 934 | 744 | 72 | 901 | 772 | 903 | 769 | 902 | 770 |
403.gcc | 72 | 555 | 1050 | 555 | 1040 | 551 | 1050 | 72 | 555 | 1050 | 555 | 1040 | 551 | 1050 |
429.mcf | 72 | 361 | 1820 | 364 | 1800 | 362 | 1810 | 72 | 361 | 1820 | 364 | 1800 | 362 | 1810 |
445.gobmk | 72 | 775 | 974 | 776 | 974 | 776 | 973 | 72 | 753 | 1000 | 754 | 1000 | 754 | 1000 |
456.hmmer | 72 | 363 | 1850 | 363 | 1850 | 362 | 1860 | 72 | 363 | 1850 | 362 | 1860 | 361 | 1860 |
458.sjeng | 72 | 791 | 1100 | 791 | 1100 | 791 | 1100 | 72 | 763 | 1140 | 764 | 1140 | 764 | 1140 |
462.libquantum | 72 | 133 | 11300 | 132 | 11300 | 132 | 11300 | 72 | 133 | 11300 | 132 | 11300 | 132 | 11300 |
464.h264ref | 72 | 952 | 1670 | 936 | 1700 | 947 | 1680 | 72 | 926 | 1720 | 922 | 1730 | 925 | 1720 |
471.omnetpp | 72 | 629 | 716 | 631 | 713 | 637 | 707 | 72 | 620 | 725 | 621 | 725 | 625 | 720 |
473.astar | 72 | 685 | 738 | 687 | 736 | 683 | 740 | 72 | 685 | 738 | 687 | 736 | 683 | 740 |
483.xalancbmk | 72 | 368 | 1350 | 370 | 1340 | 368 | 1350 | 72 | 368 | 1350 | 370 | 1340 | 368 | 1350 |
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited"
BIOS configuration: Energy Performance = Performance Utilization Profile = Unbalanced QPI snoop mode: Cluster on Die COD Enable = Enabled, Early Snoop = Disabled CPU C1E Support = Disabled QPI Link Frequency Select = 6.4 GT/s
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/SPECcpu2006/libs/32:/SPECcpu2006/libs/64:/SPECcpu2006/sh" Binaries compiled on a system with 1x Core i7-860 CPU + 8GB memory using RedHat EL 6.4 Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/redhat_transparent_hugepage/enabled Filesystem page cache cleared with: echo 1> /proc/sys/vm/drop_caches runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc> For information about Fujitsu please visit: http://www.fujitsu.com
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xCORE-AVX2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/sh -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
400.perlbench: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -auto-ilp32 |
401.bzip2: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -opt-prefetch -auto-ilp32 -ansi-alias |
403.gcc: | basepeak = yes |
429.mcf: | basepeak = yes |
445.gobmk: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -prof-use(pass 2) -ansi-alias -opt-mem-layout-trans=3 |
456.hmmer: | -xCORE-AVX2 -ipo -O3 -no-prec-div -unroll2 -auto-ilp32 |
458.sjeng: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -auto-ilp32 |
462.libquantum: | basepeak = yes |
464.h264ref: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll2 -ansi-alias |
471.omnetpp: | -xCORE-AVX2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/sh -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |