CPU2006 license: | 11 | Test date: | Aug-2014 |
---|---|---|---|
Test sponsor: | IBM Corporation | Hardware Availability: | Dec-2013 |
Tested by: | IBM Corporation | Software Availability: | Aug-2012 |
Hardware | |
---|---|
CPU Name: | AMD Opteron 6386 SE |
CPU Characteristics: | AMD Turbo CORE technology up to 3.50 GHz |
CPU MHz: | 2800 |
FPU: | Integrated |
CPU(s) enabled: | 64 cores, 4 chips, 16 cores/chip |
CPU(s) orderable: | 2,4 chips |
Primary Cache: | 512 KB I on chip per chip, 64 KB I shared / 2 cores; 16 KB D on chip per core |
Secondary Cache: | 16 MB I+D on chip per chip, 2 MB shared / 2 cores |
L3 Cache: | 16 MB I+D on chip per chip, 8 MB shared / 8 cores |
Other Cache: | None |
Memory: | 512 GB (32 x 16 GB 2Rx4 PC3-14900R-13, ECC, running at 1600 MHz) |
Disk Subsystem: | 1 x 600 GB SAS, 15000 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 6.4 (Santiago) 2.6.32-358.el6.x86_64 |
Compiler: | C/C++/Fortran: Version 4.5.2 of x86 Open64 Compiler Suite (from AMD) |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 64-bit |
Peak Pointers: | 32/64-bit |
Other Software: | None |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
410.bwaves | 64 | 1387 | 627 | 1388 | 626 | 1387 | 627 | 64 | 1363 | 638 | 1363 | 638 | 1364 | 638 |
416.gamess | 64 | 1608 | 780 | 1608 | 779 | 1599 | 784 | 64 | 1462 | 857 | 1469 | 853 | 1470 | 853 |
433.milc | 64 | 1117 | 526 | 1118 | 525 | 1118 | 525 | 64 | 956 | 614 | 955 | 615 | 955 | 615 |
434.zeusmp | 64 | 642 | 908 | 651 | 895 | 644 | 904 | 64 | 622 | 937 | 619 | 940 | 629 | 926 |
435.gromacs | 64 | 483 | 947 | 481 | 949 | 483 | 947 | 64 | 387 | 1180 | 387 | 1180 | 388 | 1180 |
436.cactusADM | 64 | 732 | 1040 | 734 | 1040 | 732 | 1050 | 64 | 671 | 1140 | 667 | 1150 | 671 | 1140 |
437.leslie3d | 64 | 1389 | 433 | 1386 | 434 | 1386 | 434 | 64 | 1071 | 562 | 1064 | 566 | 1061 | 567 |
444.namd | 64 | 665 | 772 | 659 | 779 | 661 | 777 | 64 | 563 | 911 | 567 | 905 | 563 | 911 |
447.dealII | 64 | 459 | 1590 | 461 | 1590 | 458 | 1600 | 64 | 400 | 1830 | 404 | 1810 | 403 | 1810 |
450.soplex | 64 | 1013 | 527 | 1013 | 527 | 1014 | 526 | 64 | 929 | 575 | 928 | 575 | 927 | 576 |
453.povray | 64 | 326 | 1040 | 326 | 1050 | 360 | 947 | 64 | 286 | 1190 | 286 | 1190 | 288 | 1180 |
454.calculix | 64 | 353 | 1500 | 355 | 1490 | 352 | 1500 | 64 | 339 | 1560 | 340 | 1550 | 340 | 1550 |
459.GemsFDTD | 64 | 1689 | 402 | 1692 | 401 | 1696 | 400 | 64 | 1485 | 457 | 1484 | 457 | 1481 | 458 |
465.tonto | 64 | 697 | 903 | 701 | 899 | 701 | 899 | 64 | 636 | 990 | 638 | 987 | 636 | 990 |
470.lbm | 64 | 1062 | 828 | 1022 | 861 | 1022 | 860 | 64 | 1044 | 842 | 1022 | 860 | 1020 | 862 |
481.wrf | 64 | 913 | 783 | 913 | 783 | 913 | 783 | 64 | 913 | 783 | 913 | 783 | 913 | 783 |
482.sphinx3 | 64 | 1849 | 675 | 1844 | 676 | 1849 | 675 | 64 | 1380 | 904 | 1377 | 906 | 1381 | 903 |
The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. See the configuration file for details.
'ulimit -s unlimited' was used to set environment stack size 'ulimit -l 2097152' was used to set environment locked pages in memory limit Set transparent_hugepage=never as a boot parameter in /boot/grub/menu.lst Set vm/nr_hugepages=57344 in /etc/sysctl.conf mount -t hugetlbfs nodev /mnt/hugepages
BIOS setting: Operating Mode set to Performance Sysinfo program /home/SPECcpu-20120821-amd1206/Docs/sysinfo-rev6818 $Rev: 6818 $ $Date:: 2012-07-17 #$ 5569a0425e2ad530534e4c79a46e4d28 running on x3755M3 Mon Aug 11 09:14:48 2014 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/cpu2006/Docs/config.html#sysinfo From /proc/cpuinfo model name : AMD Opteron(tm) Processor 6386 SE 4 "physical id"s (chips) 64 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 8 siblings : 16 physical 0: cores 0 1 2 3 4 5 6 7 physical 1: cores 0 1 2 3 4 5 6 7 physical 2: cores 0 1 2 3 4 5 6 7 physical 3: cores 0 1 2 3 4 5 6 7 cache size : 2048 KB From /proc/meminfo MemTotal: 529379112 kB HugePages_Total: 57344 Hugepagesize: 2048 kB /usr/bin/lsb_release -d Red Hat Enterprise Linux Server release 6.4 (Santiago) From /etc/*release* /etc/*version* redhat-release: Red Hat Enterprise Linux Server release 6.4 (Santiago) system-release: Red Hat Enterprise Linux Server release 6.4 (Santiago) system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server uname -a: Linux x3755M3 2.6.32-358.el6.x86_64 #1 SMP Tue Jan 29 11:47:41 EST 2013 x86_64 x86_64 x86_64 GNU/Linux run-level 3 Aug 7 11:42 SPEC is set to: /home/SPECcpu-20120821-amd1206 Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/VolGroup-lv_root ext4 546G 151G 368G 30% / Additional information from dmidecode: BIOS American Megatrends Inc. -[AYE167AUS-1.14]- 10/14/2013 Memory: 32x 16 GB 32x Samsung M393B2G70BH0- 16 GB 1866 MHz 2 rank (End of data from sysinfo program) The sysinfo-rev6818 used in this submission has an issue parsing the dmidecode output with "Memory Device Mapped Address" lines. The additional "32x 16 GB" in the sysinfo section above are not actual memory DIMMs and can be ignored.
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/home/SPECcpu-20120821-amd1206/amd1206-rate-libs-revA/32:/home/SPECcpu-20120821-amd1206/amd1206-rate-libs-revA/64" The x86 Open64 Compiler Suite is only available from (and supported by) AMD at http://developer.amd.com/cpu/open64 Binaries were compiled on a system with 2x AMD Opteron 6386SE chips + 128GB Memory using RHEL 6.3
opencc |
openCC |
openf95 |
opencc openf95 |
410.bwaves: | -DSPEC_CPU_LP64 |
416.gamess: | -DSPEC_CPU_LP64 |
433.milc: | -DSPEC_CPU_LP64 |
434.zeusmp: | -DSPEC_CPU_LP64 |
435.gromacs: | -DSPEC_CPU_LP64 |
436.cactusADM: | -DSPEC_CPU_LP64 -fno-second-underscore |
437.leslie3d: | -DSPEC_CPU_LP64 |
444.namd: | -DSPEC_CPU_LP64 |
447.dealII: | -DSPEC_CPU_LP64 |
450.soplex: | -DSPEC_CPU_LP64 |
453.povray: | -DSPEC_CPU_LP64 |
454.calculix: | -DSPEC_CPU_LP64 |
459.GemsFDTD: | -DSPEC_CPU_LP64 |
465.tonto: | -DSPEC_CPU_LP64 |
470.lbm: | -DSPEC_CPU_LP64 |
481.wrf: | -DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LP64 -fno-second-underscore |
482.sphinx3: | -DSPEC_CPU_LP64 |
-Ofast -OPT:malloc_alg=1 -HP:bd=2m:heap=2m -IPA:plimit=8000 -IPA:small_pu=100 -mso -march=bdver1 |
-Ofast -static -CG:load_exe=0 -OPT:malloc_alg=1 -INLINE:aggressive=on -HP:bd=2m:heap=2m -D__OPEN64_FAST_SET -march=bdver1 |
-Ofast -LNO:blocking=off -LNO:simd_peel_align=on -OPT:rsqrt=2 -OPT:unroll_size=256 -HP:bd=2m:heap=2m -mso -march=bdver1 |
-Ofast -OPT:malloc_alg=1 -HP:bd=2m:heap=2m -IPA:plimit=8000 -IPA:small_pu=100 -mso -march=bdver1 -LNO:blocking=off -LNO:simd_peel_align=on -OPT:rsqrt=2 -OPT:unroll_size=256 |
opencc |
openCC |
openf95 |
opencc openf95 |
410.bwaves: | -DSPEC_CPU_LP64 |
416.gamess: | -DSPEC_CPU_LP64 |
433.milc: | -DSPEC_CPU_LP64 |
434.zeusmp: | -DSPEC_CPU_LP64 |
435.gromacs: | -DSPEC_CPU_LP64 |
436.cactusADM: | -DSPEC_CPU_LP64 -fno-second-underscore |
437.leslie3d: | -DSPEC_CPU_LP64 |
444.namd: | -DSPEC_CPU_LP64 |
453.povray: | -DSPEC_CPU_LP64 |
454.calculix: | -DSPEC_CPU_LP64 |
459.GemsFDTD: | -DSPEC_CPU_LP64 |
465.tonto: | -DSPEC_CPU_LP64 |
470.lbm: | -DSPEC_CPU_LP64 |
481.wrf: | -DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LP64 -fno-second-underscore |
435.gromacs: | -Ofast -OPT:rsqrt=2 -HP:bdt=2m:heap=2m -CG:local_sched_alg=2 -CG:load_exe=3 -GRA:unspill=on -march=bdver1 -LNO:simd=3 |
436.cactusADM: | -fb_create fbdata(pass 1) -fb_opt fbdata(pass 2) -Ofast -LNO:blocking=off -LNO:prefetch=2 -LNO:pf2=0 -LNO:prefetch_ahead=4 -HP -CG:locs_shallow_depth=1 -CG:load_exe=0 -CG:dsched=on -WOPT:sib=on -march=bdver1 |
454.calculix: | -Ofast -OPT:unroll_size=256 -OPT:alias=disjoint -GRA:optimize_boundary=on -CG:dsched=on -HP:bdt=2m:heap=2m -march=bdver1 |
481.wrf: | basepeak = yes |