CPU2006 license: | 001176 | Test date: | Oct-2013 |
---|---|---|---|
Test sponsor: | Supermicro | Hardware Availability: | Jan-2014 |
Tested by: | Supermicro | Software Availability: | Aug-2012 |
Hardware | |
---|---|
CPU Name: | AMD Opteron 6338P |
CPU Characteristics: | AMD Turbo CORE technology up to 2.80 GHz |
CPU MHz: | 2300 |
FPU: | Integrated |
CPU(s) enabled: | 48 cores, 4 chips, 12 cores/chip |
CPU(s) orderable: | 2,4 chips |
Primary Cache: | 384 KB I on chip per chip, 64 KB I shared / 2 cores; 16 KB D on chip per core |
Secondary Cache: | 12 MB I+D on chip per chip, 2 MB shared / 2 cores |
L3 Cache: | 16 MB I+D on chip per chip, 8 MB shared / 6 cores |
Other Cache: | None |
Memory: | 256 GB (32 x 8 GB 2Rx4 PC3-12800R-11, ECC) |
Disk Subsystem: | 1 x 500 GB SATA, 7200 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 6.4, Kernel 2.6.32-358.el6.x86_64 |
Compiler: | C/C++/Fortran: Version 4.5.2 of x86 Open64 Compiler Suite (from AMD) |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (Full multiuser with network) |
Base Pointers: | 64-bit |
Peak Pointers: | 32/64-bit |
Other Software: | None |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
410.bwaves | 48 | 1048 | 622 | 1047 | 623 | 1047 | 623 | 48 | 1034 | 631 | 1033 | 631 | 1036 | 630 |
416.gamess | 48 | 2008 | 468 | 2006 | 468 | 2002 | 470 | 48 | 1809 | 519 | 1803 | 521 | 1813 | 518 |
433.milc | 48 | 815 | 540 | 818 | 538 | 816 | 540 | 48 | 692 | 637 | 692 | 636 | 691 | 637 |
434.zeusmp | 48 | 672 | 650 | 668 | 654 | 667 | 655 | 48 | 645 | 677 | 642 | 680 | 643 | 680 |
435.gromacs | 48 | 597 | 574 | 592 | 579 | 595 | 576 | 48 | 486 | 705 | 482 | 711 | 480 | 713 |
436.cactusADM | 48 | 694 | 826 | 696 | 825 | 697 | 823 | 48 | 622 | 922 | 620 | 925 | 624 | 920 |
437.leslie3d | 48 | 1023 | 441 | 1021 | 442 | 1024 | 441 | 48 | 910 | 496 | 893 | 506 | 899 | 502 |
444.namd | 48 | 825 | 466 | 834 | 462 | 835 | 461 | 48 | 698 | 552 | 690 | 558 | 694 | 555 |
447.dealII | 48 | 518 | 1060 | 513 | 1070 | 526 | 1040 | 48 | 489 | 1120 | 489 | 1120 | 488 | 1130 |
450.soplex | 48 | 1162 | 345 | 776 | 516 | 777 | 515 | 48 | 1037 | 386 | 743 | 539 | 751 | 533 |
453.povray | 48 | 416 | 613 | 428 | 596 | 415 | 616 | 48 | 370 | 691 | 367 | 696 | 368 | 694 |
454.calculix | 48 | 431 | 920 | 431 | 919 | 431 | 918 | 48 | 414 | 957 | 421 | 941 | 418 | 948 |
459.GemsFDTD | 48 | 1224 | 416 | 1225 | 416 | 1226 | 415 | 48 | 1096 | 465 | 1094 | 466 | 1095 | 465 |
465.tonto | 48 | 819 | 577 | 820 | 576 | 832 | 568 | 48 | 745 | 634 | 742 | 636 | 768 | 615 |
470.lbm | 48 | 843 | 782 | 809 | 815 | 818 | 806 | 48 | 805 | 819 | 814 | 810 | 814 | 810 |
481.wrf | 48 | 757 | 709 | 743 | 721 | 752 | 713 | 48 | 756 | 709 | 735 | 730 | 736 | 729 |
482.sphinx3 | 48 | 1536 | 609 | 1507 | 621 | 1503 | 622 | 48 | 1390 | 673 | 1292 | 724 | 1346 | 695 |
The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. See the configuration file for details.
'ulimit -s unlimited' was used to set environment stack size 'ulimit -l 2097152' was used to set environment locked pages in memory limit Set transparent_hugepage=never as a boot parameter in /boot/grub/menu.lst Set vm/nr_hugepages=43008 in /etc/sysctl.conf mount -t hugetlbfs nodev /mnt/hugepages
C State mode set to disabled under Processor & Clock Options in BIOS. HPC Mode set to enabled under Processor & Clock Options in BIOS. C1E Support set to disabled under Processor & Clock Options in BIOS. Power Down Enable set to disabled in Memory Configuration in BIOS.
Environment variables set by runspec before the start of the run: HUGETLB_LIMIT = "896" LD_LIBRARY_PATH = "/home/spec/amd1206-rate-libs-revA/32:/home/spec/amd1206-rate-libs-revA/64" The x86 Open64 Compiler Suite is only available from (and supported by) AMD at http://developer.amd.com/cpu/open64 Binaries were compiled on a system with 2x AMD Opteron 6386SE chips + 128GB Memory using RHEL 6.3
opencc |
openCC |
openf95 |
opencc openf95 |
410.bwaves: | -DSPEC_CPU_LP64 |
416.gamess: | -DSPEC_CPU_LP64 |
433.milc: | -DSPEC_CPU_LP64 |
434.zeusmp: | -DSPEC_CPU_LP64 |
435.gromacs: | -DSPEC_CPU_LP64 |
436.cactusADM: | -DSPEC_CPU_LP64 -fno-second-underscore |
437.leslie3d: | -DSPEC_CPU_LP64 |
444.namd: | -DSPEC_CPU_LP64 |
447.dealII: | -DSPEC_CPU_LP64 |
450.soplex: | -DSPEC_CPU_LP64 |
453.povray: | -DSPEC_CPU_LP64 |
454.calculix: | -DSPEC_CPU_LP64 |
459.GemsFDTD: | -DSPEC_CPU_LP64 |
465.tonto: | -DSPEC_CPU_LP64 |
470.lbm: | -DSPEC_CPU_LP64 |
481.wrf: | -DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LP64 -fno-second-underscore |
482.sphinx3: | -DSPEC_CPU_LP64 |
-Ofast -OPT:malloc_alg=1 -HP:bd=2m:heap=2m -IPA:plimit=8000 -IPA:small_pu=100 -mso -march=bdver1 |
-Ofast -static -CG:load_exe=0 -OPT:malloc_alg=1 -INLINE:aggressive=on -HP:bd=2m:heap=2m -D__OPEN64_FAST_SET -march=bdver1 |
-Ofast -LNO:blocking=off -LNO:simd_peel_align=on -OPT:rsqrt=2 -OPT:unroll_size=256 -HP:bd=2m:heap=2m -mso -march=bdver1 |
-Ofast -OPT:malloc_alg=1 -HP:bd=2m:heap=2m -IPA:plimit=8000 -IPA:small_pu=100 -mso -march=bdver1 -LNO:blocking=off -LNO:simd_peel_align=on -OPT:rsqrt=2 -OPT:unroll_size=256 |
opencc |
openCC |
openf95 |
opencc openf95 |
410.bwaves: | -DSPEC_CPU_LP64 |
416.gamess: | -DSPEC_CPU_LP64 |
433.milc: | -DSPEC_CPU_LP64 |
434.zeusmp: | -DSPEC_CPU_LP64 |
435.gromacs: | -DSPEC_CPU_LP64 |
436.cactusADM: | -DSPEC_CPU_LP64 -fno-second-underscore |
437.leslie3d: | -DSPEC_CPU_LP64 |
444.namd: | -DSPEC_CPU_LP64 |
453.povray: | -DSPEC_CPU_LP64 |
454.calculix: | -DSPEC_CPU_LP64 |
459.GemsFDTD: | -DSPEC_CPU_LP64 |
465.tonto: | -DSPEC_CPU_LP64 |
470.lbm: | -DSPEC_CPU_LP64 |
481.wrf: | -DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LP64 -fno-second-underscore |