CPU2006 license: | 55 | Test date: | Mar-2012 |
---|---|---|---|
Test sponsor: | Dell Inc. | Hardware Availability: | May-2012 |
Tested by: | Dell Inc. | Software Availability: | Feb-2012 |
Hardware | |
---|---|
CPU Name: | Intel Pentium 1403 |
CPU Characteristics: | |
CPU MHz: | 2600 |
FPU: | Integrated |
CPU(s) enabled: | 2 cores, 1 chip, 2 cores/chip |
CPU(s) orderable: | 1 chip |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 5 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 24 GB (3 x 8 GB 2Rx4 PC3-12800R-11, ECC, running at 1066 MHz) |
Disk Subsystem: | 2 x 300 GB 15000 RPM SAS, RAID 1 |
Other Hardware: | None |
Software | |
---|---|
Operating System: | SUSE Linux Enterprise Server 11 SP2 (x86_64) 3.0.13-0.9-default |
Compiler: | C/C++: Version 12.1.0.225 of Intel C++ Studio XE for Linux |
Auto Parallel: | No |
File System: | ext3 |
System State: | Run level 3 (add definition here) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V9.01 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 2 | 456 | 42.9 | 458 | 42.7 | 458 | 42.7 | 2 | 375 | 52.1 | 375 | 52.0 | 376 | 52.0 |
401.bzip2 | 2 | 629 | 30.7 | 623 | 31.0 | 625 | 30.9 | 2 | 591 | 32.6 | 597 | 32.3 | 589 | 32.8 |
403.gcc | 2 | 336 | 47.9 | 335 | 48.0 | 336 | 48.0 | 2 | 336 | 47.9 | 335 | 48.0 | 336 | 48.0 |
429.mcf | 2 | 188 | 97.0 | 188 | 97.2 | 188 | 97.2 | 2 | 188 | 97.0 | 188 | 97.2 | 188 | 97.2 |
445.gobmk | 2 | 552 | 38.0 | 553 | 38.0 | 553 | 38.0 | 2 | 541 | 38.8 | 542 | 38.7 | 542 | 38.7 |
456.hmmer | 2 | 246 | 75.9 | 248 | 75.3 | 250 | 74.6 | 2 | 229 | 81.5 | 229 | 81.5 | 229 | 81.4 |
458.sjeng | 2 | 591 | 40.9 | 591 | 40.9 | 591 | 40.9 | 2 | 568 | 42.6 | 568 | 42.6 | 567 | 42.7 |
462.libquantum | 2 | 112 | 370 | 111 | 372 | 111 | 372 | 2 | 112 | 370 | 111 | 372 | 111 | 372 |
464.h264ref | 2 | 551 | 80.3 | 553 | 80.0 | 565 | 78.4 | 2 | 538 | 82.2 | 538 | 82.2 | 548 | 80.8 |
471.omnetpp | 2 | 348 | 35.9 | 349 | 35.8 | 348 | 35.9 | 2 | 319 | 39.1 | 320 | 39.1 | 319 | 39.2 |
473.astar | 2 | 410 | 34.2 | 407 | 34.5 | 408 | 34.4 | 2 | 410 | 34.2 | 407 | 34.5 | 408 | 34.4 |
483.xalancbmk | 2 | 197 | 70.1 | 197 | 70.2 | 197 | 70.0 | 2 | 197 | 70.1 | 197 | 70.2 | 197 | 70.0 |
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited"
CPU Power Management set to Maximum Performance Memory Frequency set to Maximum Performance Turbo Boost set to Enabled C States/C1E set to Enabled Sysinfo program /root/CPU2006-1.2/config/sysinfo.rev6800 $Rev: 6800 $ $Date:: 2011-10-11 #$ 6f2ebdff5032aaa42e583f96b07f99d3 running on Defy Fri Mar 9 09:56:27 2012 This section contains SUT (System Under Test) info as seen by some common utilities. To remove or add to this section, see: http://www.spec.org/cpu2006/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel(R) Pentium(R) CPU 1403 @ 2.60GHz 1 "physical id"s (chips) 2 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 2 siblings : 2 physical 0: cores 0 1 cache size : 5120 KB From /proc/meminfo MemTotal: 24559976 kB HugePages_Total: 0 Hugepagesize: 2048 kB /usr/bin/lsb_release -d SUSE Linux Enterprise Server 11 (x86_64) From /etc/*release* /etc/*version* SuSE-release: SUSE Linux Enterprise Server 11 (x86_64) VERSION = 11 PATCHLEVEL = 2 uname -a: Linux Defy 3.0.13-0.9-default #1 SMP Mon Jan 16 17:33:03 UTC 2012 (54ddfaf) x86_64 x86_64 x86_64 GNU/Linux run-level 3 Mar 9 09:52 last=S SPEC is set to: /root/CPU2006-1.2 Filesystem Type Size Used Avail Use% Mounted on /dev/sda1 ext3 266G 7.4G 245G 3% / Additional information from dmidecode: (End of data from sysinfo program)
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/root/CPU2006-1.2/libs/32:/root/CPU2006-1.2/libs/64" Binaries compiled on a system with 1x Core i7-860 CPU + 8GB memory using RHEL5.5 Transparent Huge Pages enabled with: echo always > /sys/kernel/mm/transparent_hugepage/enabled Filesystem page cache cleared with: echo 1> /proc/sys/vm/drop_caches runspec command invoked through numactl i.e.: numactl --interleave=all runspec <etc>
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/smartheap -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
400.perlbench: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -auto-ilp32 |
401.bzip2: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -opt-prefetch -auto-ilp32 -ansi-alias |
403.gcc: | basepeak = yes |
429.mcf: | basepeak = yes |
445.gobmk: | -xSSE4.2(pass 2) -prof-gen(pass 1) -prof-use(pass 2) -ansi-alias -opt-mem-layout-trans=3 |
456.hmmer: | -xSSE4.2 -ipo -O3 -no-prec-div -unroll2 -auto-ilp32 |
458.sjeng: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll4 -auto-ilp32 |
462.libquantum: | basepeak = yes |
464.h264ref: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -unroll2 -ansi-alias |
471.omnetpp: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/smartheap -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |