CPU2006 license: | 9001 | Test date: | Mar-2012 |
---|---|---|---|
Test sponsor: | Itautec | Hardware Availability: | Jun-2012 |
Tested by: | Itautec | Software Availability: | Dec-2011 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E3-1220 |
CPU Characteristics: | Intel Turbo Boost Technology up to 3.40 GHz |
CPU MHz: | 3100 |
FPU: | Integrated |
CPU(s) enabled: | 4 cores, 1 chip, 4 cores/chip |
CPU(s) orderable: | 1 chip |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 8 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 8 GB (4 x 2 GB 2Rx4 PC3-10600U-9, ECC) |
Disk Subsystem: | 500 GB, SATA-2, 7200 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server Release 6.2, 2.6.32-220.el6.x86_64 |
Compiler: | C/C++: Version 12.1.0 of Intel Compiler XE Build 20111011 |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V8.1 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 4 | 373 | 105 | 375 | 104 | 374 | 104 | 4 | 311 | 126 | 307 | 127 | 307 | 127 |
401.bzip2 | 4 | 521 | 74.1 | 518 | 74.5 | 516 | 74.8 | 4 | 498 | 77.5 | 491 | 78.5 | 491 | 78.6 |
403.gcc | 4 | 297 | 108 | 298 | 108 | 298 | 108 | 4 | 299 | 108 | 299 | 108 | 300 | 108 |
429.mcf | 4 | 180 | 203 | 170 | 214 | 170 | 214 | 4 | 209 | 175 | 210 | 174 | 210 | 174 |
445.gobmk | 4 | 448 | 93.6 | 446 | 94.2 | 445 | 94.2 | 4 | 440 | 95.3 | 440 | 95.4 | 440 | 95.4 |
456.hmmer | 4 | 204 | 183 | 204 | 183 | 203 | 183 | 4 | 188 | 198 | 189 | 197 | 190 | 197 |
458.sjeng | 4 | 477 | 102 | 477 | 102 | 476 | 102 | 4 | 457 | 106 | 457 | 106 | 457 | 106 |
462.libquantum | 4 | 96.2 | 861 | 96.1 | 863 | 96.3 | 860 | 4 | 96.2 | 861 | 96.1 | 863 | 96.3 | 860 |
464.h264ref | 4 | 451 | 196 | 452 | 196 | 452 | 196 | 4 | 443 | 200 | 446 | 199 | 440 | 201 |
471.omnetpp | 4 | 315 | 79.3 | 313 | 79.8 | 313 | 79.9 | 4 | 295 | 84.7 | 295 | 84.7 | 295 | 84.9 |
473.astar | 4 | 363 | 77.3 | 362 | 77.6 | 363 | 77.3 | 4 | 363 | 77.3 | 362 | 77.6 | 363 | 77.3 |
483.xalancbmk | 4 | 178 | 155 | 179 | 154 | 179 | 155 | 4 | 178 | 155 | 179 | 154 | 179 | 155 |
The config file option 'submit' was used. numactl was used to bind copies to the cores
'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run. Large pages were not enabled for this run
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/home/rcaneca/sh/SmartHeap_8.1/lib -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
471.omnetpp: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/home/rcaneca/sh/SmartHeap_8.1/lib -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |