CPU2006 license: | 9001 | Test date: | Jan-2012 |
---|---|---|---|
Test sponsor: | Itautec | Hardware Availability: | Jul-2011 |
Tested by: | Itautec | Software Availability: | Dec-2011 |
Hardware | |
---|---|
CPU Name: | Intel Xeon E5645 |
CPU Characteristics: | Intel Turbo Boost Technology up to 2.80 GHz |
CPU MHz: | 2400 |
FPU: | Integrated |
CPU(s) enabled: | 12 cores, 2 chips, 6 cores/chip, 2 threads/core |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 256 KB I+D on chip per core |
L3 Cache: | 12 MB I+D on chip per chip |
Other Cache: | None |
Memory: | 48 GB (12 x 4 GB 2Rx4 PC3-10600R-9, ECC) |
Disk Subsystem: | 2 x 146 GB, SAS, 15000 RPM, RAID 0 |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server Release 6.2, 2.6.32-220.el6.x86_64 |
Compiler: | C/C++: Version 12.1.0 of Intel Compiler XE Build 20111011 |
Auto Parallel: | No |
File System: | ext4 |
System State: | Run level 3 (multi-user) |
Base Pointers: | 32-bit |
Peak Pointers: | 32/64-bit |
Other Software: | Microquill SmartHeap V8.1 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 24 | 908 | 258 | 912 | 257 | 906 | 259 | 24 | 773 | 303 | 761 | 308 | 762 | 308 |
401.bzip2 | 24 | 1292 | 179 | 1280 | 181 | 1272 | 182 | 24 | 1221 | 190 | 1243 | 186 | 1245 | 186 |
403.gcc | 24 | 975 | 198 | 965 | 200 | 972 | 199 | 24 | 975 | 198 | 965 | 200 | 972 | 199 |
429.mcf | 24 | 583 | 375 | 579 | 378 | 584 | 375 | 24 | 583 | 375 | 579 | 378 | 584 | 375 |
445.gobmk | 24 | 879 | 286 | 882 | 285 | 881 | 286 | 24 | 833 | 302 | 836 | 301 | 835 | 301 |
456.hmmer | 24 | 601 | 372 | 601 | 373 | 603 | 372 | 12 | 262 | 428 | 262 | 428 | 261 | 429 |
458.sjeng | 24 | 1035 | 281 | 1027 | 283 | 1027 | 283 | 24 | 966 | 301 | 969 | 300 | 968 | 300 |
462.libquantum | 24 | 245 | 2030 | 245 | 2030 | 245 | 2030 | 24 | 245 | 2030 | 245 | 2030 | 245 | 2030 |
464.h264ref | 24 | 1312 | 405 | 1313 | 405 | 1311 | 405 | 24 | 1300 | 408 | 1310 | 405 | 1321 | 402 |
471.omnetpp | 24 | 705 | 213 | 707 | 212 | 705 | 213 | 24 | 680 | 221 | 679 | 221 | 679 | 221 |
473.astar | 24 | 898 | 188 | 895 | 188 | 890 | 189 | 24 | 898 | 188 | 895 | 188 | 890 | 189 |
483.xalancbmk | 24 | 489 | 339 | 489 | 339 | 489 | 339 | 24 | 489 | 339 | 489 | 339 | 489 | 339 |
The config file option 'submit' was used. numactl was used to bind copies to the cores
'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run. Large pages were not enabled for this run
Data Reuse disabled in BIOS. DCU Prefetcher disabled in BIOS.
400.perlbench: | -DSPEC_CPU_LINUX_IA32 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 |
-xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -opt-mem-layout-trans=3 -Wl,-z,muldefs -L/home/rcaneca/sh/SmartHeap_8.1/lib -lsmartheap |
icc -m32 | |
400.perlbench: | icc -m64 |
401.bzip2: | icc -m64 |
456.hmmer: | icc -m64 |
458.sjeng: | icc -m64 |
icpc -m32 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LINUX |
483.xalancbmk: | -DSPEC_CPU_LINUX |
471.omnetpp: | -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=block -Wl,-z,muldefs -L/home/rcaneca/sh/SmartHeap_8.1/lib -lsmartheap |
473.astar: | basepeak = yes |
483.xalancbmk: | basepeak = yes |