CPU2006 license: | 11 | Test date: | Mar-2011 |
---|---|---|---|
Test sponsor: | IBM Corporation | Hardware Availability: | May-2011 |
Tested by: | IBM Corporation | Software Availability: | May-2010 |
Hardware | |
---|---|
CPU Name: | AMD Opteron 6180 SE |
CPU Characteristics: | |
CPU MHz: | 2500 |
FPU: | Integrated |
CPU(s) enabled: | 48 cores, 4 chips, 12 cores/chip |
CPU(s) orderable: | 2,4 chips |
Primary Cache: | 64 KB I + 64 KB D on chip per core |
Secondary Cache: | 512 KB I+D on chip per core |
L3 Cache: | 12 MB I+D on chip per chip, 6 MB shared / 6 cores |
Other Cache: | None |
Memory: | 128 GB (32 x 4 GB 2Rx4 PC3-10600R-9, ECC) |
Disk Subsystem: | 1 x 250 GB SATA, 7200 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Red Hat Enterprise Linux Server release 5.5, Kernel 2.6.18-194.el5 |
Compiler: | x86 Open64 4.2.3.2 Compiler Suite (from AMD) |
Auto Parallel: | Yes |
File System: | ext3 |
System State: | Run level 3 (Full multiuser with network) |
Base Pointers: | 64-bit |
Peak Pointers: | 32/64-bit |
Other Software: | None |
Benchmark | Base | Peak | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||
410.bwaves | 222 | 61.3 | 221 | 61.5 | 221 | 61.6 | 60.1 | 226 | 59.7 | 227 | 59.9 | 227 |
416.gamess | 1228 | 15.9 | 1228 | 15.9 | 1226 | 16.0 | 1118 | 17.5 | 1123 | 17.4 | 1120 | 17.5 |
433.milc | 551 | 16.7 | 547 | 16.8 | 549 | 16.7 | 398 | 23.1 | 396 | 23.2 | 396 | 23.2 |
434.zeusmp | 246 | 36.9 | 246 | 36.9 | 247 | 36.9 | 239 | 38.1 | 239 | 38.0 | 239 | 38.0 |
435.gromacs | 540 | 13.2 | 541 | 13.2 | 540 | 13.2 | 422 | 16.9 | 422 | 16.9 | 421 | 17.0 |
436.cactusADM | 151 | 79.2 | 153 | 78.3 | 151 | 79.3 | 98.8 | 121 | 99.7 | 120 | 99.3 | 120 |
437.leslie3d | 542 | 17.3 | 537 | 17.5 | 543 | 17.3 | 497 | 18.9 | 494 | 19.0 | 499 | 18.8 |
444.namd | 625 | 12.8 | 626 | 12.8 | 627 | 12.8 | 570 | 14.1 | 570 | 14.1 | 569 | 14.1 |
447.dealII | 491 | 23.3 | 487 | 23.5 | 492 | 23.3 | 417 | 27.4 | 416 | 27.5 | 417 | 27.5 |
450.soplex | 626 | 13.3 | 626 | 13.3 | 625 | 13.4 | 543 | 15.4 | 546 | 15.3 | 541 | 15.4 |
453.povray | 285 | 18.6 | 288 | 18.5 | 284 | 18.7 | 276 | 19.3 | 276 | 19.2 | 276 | 19.3 |
454.calculix | 381 | 21.6 | 382 | 21.6 | 383 | 21.6 | 360 | 22.9 | 360 | 22.9 | 363 | 22.7 |
459.GemsFDTD | 355 | 29.9 | 355 | 29.9 | 355 | 29.9 | 337 | 31.5 | 337 | 31.5 | 337 | 31.5 |
465.tonto | 541 | 18.2 | 538 | 18.3 | 539 | 18.3 | 527 | 18.7 | 526 | 18.7 | 522 | 18.8 |
470.lbm | 575 | 23.9 | 578 | 23.8 | 577 | 23.8 | 23.3 | 589 | 23.2 | 592 | 23.4 | 587 |
481.wrf | 362 | 30.8 | 364 | 30.7 | 362 | 30.9 | 362 | 30.8 | 364 | 30.7 | 362 | 30.9 |
482.sphinx3 | 822 | 23.7 | 822 | 23.7 | 820 | 23.8 | 781 | 25.0 | 784 | 24.9 | 780 | 25.0 |
The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. See the configuration file for details.
'ulimit -s unlimited' was used to set environment stack size 'ulimit -l 2097152' was used to set environment locked pages in memory limit Set vm/nr_hugepages=8000 in /etc/sysctl.conf mount -t hugetlbfs nodev /mnt/hugepages cpuspeed stop was used to set the CPU frequency to its maximum.
BIOS Settings: Operating Mode set to Performance Mode
Environment variables set by runspec before the start of the run: LD_LIBRARY_PATH = "/root/speccpu_speed_revA-6/amd1002mc-speed-libs-revA/64:/root/speccpu_speed_revA-6/amd1002mc-speed-libs-revA/32" O64_OMP_AFFINITY_MAP = "0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47" O64_OMP_SPIN_USER_LOCK = "true" The x86 Open64 Compiler Suite is only available from (and supported by) AMD at http://developer.amd.com/cpu/open64 Binaries were compiled on SLES10 SP2 with binutils 2.18
opencc |
openCC |
openf95 |
opencc openf95 |
410.bwaves: | -DSPEC_CPU_LP64 |
416.gamess: | -DSPEC_CPU_LP64 |
433.milc: | -DSPEC_CPU_LP64 |
434.zeusmp: | -DSPEC_CPU_LP64 |
435.gromacs: | -DSPEC_CPU_LP64 |
436.cactusADM: | -DSPEC_CPU_LP64 -fno-second-underscore |
437.leslie3d: | -DSPEC_CPU_LP64 |
444.namd: | -DSPEC_CPU_LP64 |
447.dealII: | -DSPEC_CPU_LP64 |
450.soplex: | -DSPEC_CPU_LP64 |
453.povray: | -DSPEC_CPU_LP64 |
454.calculix: | -DSPEC_CPU_LP64 |
459.GemsFDTD: | -DSPEC_CPU_LP64 |
465.tonto: | -DSPEC_CPU_LP64 |
470.lbm: | -DSPEC_CPU_LP64 |
481.wrf: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG -fno-second-underscore |
482.sphinx3: | -DSPEC_CPU_LP64 |
-march=barcelona -Ofast -HP:bdt=2m:heap=2m |
-march=barcelona -Ofast -static -INLINE:aggressive=on -HP:bdt=2m:heap=2m |
-march=barcelona -Ofast -apo -LNO:parallel_overhead=10000 -LNO:fusion_peeling_limit=0 -HP:bdt=2m:heap=2m |
-march=barcelona -Ofast -HP:bdt=2m:heap=2m -apo -LNO:parallel_overhead=10000 -LNO:fusion_peeling_limit=0 |
opencc |
openCC |
openf95 |
opencc openf95 |
410.bwaves: | -DSPEC_CPU_LP64 |
416.gamess: | -DSPEC_CPU_LP64 |
433.milc: | -DSPEC_CPU_LP64 |
434.zeusmp: | -DSPEC_CPU_LP64 |
435.gromacs: | -DSPEC_CPU_LP64 |
436.cactusADM: | -DSPEC_CPU_LP64 -fno-second-underscore |
437.leslie3d: | -DSPEC_CPU_LP64 |
444.namd: | -DSPEC_CPU_LP64 |
453.povray: | -DSPEC_CPU_LP64 |
454.calculix: | -DSPEC_CPU_LP64 |
459.GemsFDTD: | -DSPEC_CPU_LP64 |
465.tonto: | -DSPEC_CPU_LP64 |
470.lbm: | -DSPEC_CPU_LP64 |
481.wrf: | -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX -DSPEC_CPU_CASE_FLAG -fno-second-underscore |
482.sphinx3: | -DSPEC_CPU_LP64 |
435.gromacs: | -march=barcelona -Ofast -apo -OPT:rsqrt=2 -HP:bdt=2m:heap=2m |
436.cactusADM: | -march=barcelona -fb_create fbdata(pass 1) -fb_opt fbdata(pass 2) -Ofast -apo -LANG:heap_allocation_threshold=1000 -LNO:prefetch_ahead=1 -HP:bdt=2m:heap=2m |
454.calculix: | -march=barcelona -Ofast -LNO:prefetch_ahead=30 -CG:load_exe=0 -CG:ptr_load_use=0 -CG:local_sched_alg=2 -CG:compute_to=on -WOPT:unroll=2 -GRA:optimize_boundary=on -HP:bdt=2m:heap=2m -apo |
481.wrf: | basepeak = yes |