# Invocation command line:
# /cpu2006/bin/runspec --rate 24 -c cpu2006.1.1.ic12.linux64.sse42.rate.03jan2011.cfg --define smt --define cores=12 --define physicalfirst --flagsurl=Intel-ic12.0-linux64-revA.xml --parallel_test=1 -T all -o all fp
# output_root was not used for this run
############################################################################
############################################################################
# This is a sample config file. It was tested with:
#
#      Compiler name/version:       Intel Compiler 12.0
#      Operating system version:    64-Bit RedHat Enterprise Linux64 5.5
#      Hardware:                    Intel processors supporting SSE4.2
#
############################################################################
# SPEC CPU2006 Intel Linux64 config file
# Oct 2010 IC 12.0 Linux64
############################################################################
action      = validate
tune        = base,peak
ext         = cpu2006.1.1.ic12.linux64.sse42.rate.03jan2011
PATHSEP     = /
check_md5=1
reportable=1
bench_post_setup=sync
parallel_test=0
mean_anyway=1
verbose=6

#
# These are listed as benchmark-tuning-extension-machine
#
int=default=default=default:
CC=  icc  -m32
CXX= icpc -m32
OBJ = .o
SMARTHEAP32_DIR = /smartheap
SMARTHEAP64_DIR = /smartheap
LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT

fp=default=default=default:
CC=  icc   -m64
CXX= icpc  -m64
FC=  ifort -m64
OBJ = .o

437.leslie3d,453.povray,454.calculix,459.GemsFDTD,465.tonto=peak=default:
LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT
PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT
PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT

# For UP systems, we need to know if the processors are ordered across cores first or in order
# If across cores, processors 0, 1, 2 and 3 are on distinct physical cores
# Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores

#default:
#submit       = numactl --localalloc --physcpubind=$SPECCOPYNUM $command

#%ifdef %{no-numa}
#submit       = taskset -c $SPECCOPYNUM $command
#%endif

#include: intel-sut.inc
#  ----- Begin inclusion of 'intel-sut.inc'
############################################################################
submit     = MYMASK=`printf '0x%x' \$((1<<\$SPECCOPYNUM))`; taskset \$MYMASK $command
submit0    = echo "$command" > run.sh
submit1    = if `test $SPECCOPYNUM -eq 0 `; then numactl -m 0 --physcpubind=0 sh run.sh; fi
submit2    = if `test $SPECCOPYNUM -eq 1 `; then numactl -m 0 --physcpubind=1 sh run.sh; fi
submit3    = if `test $SPECCOPYNUM -eq 2 `; then numactl -m 0 --physcpubind=2 sh run.sh; fi
submit4    = if `test $SPECCOPYNUM -eq 3 `; then numactl -m 0 --physcpubind=3 sh run.sh; fi
submit5    = if `test $SPECCOPYNUM -eq 4 `; then numactl -m 0 --physcpubind=4 sh run.sh; fi
submit6    = if `test $SPECCOPYNUM -eq 5 `; then numactl -m 0 --physcpubind=5 sh run.sh; fi
submit7    = if `test $SPECCOPYNUM -eq 6 `; then numactl -m 1 --physcpubind=6 sh run.sh; fi
submit8    = if `test $SPECCOPYNUM -eq 7 `; then numactl -m 1 --physcpubind=7 sh run.sh; fi
submit9    = if `test $SPECCOPYNUM -eq 8 `; then numactl -m 1 --physcpubind=8 sh run.sh; fi
submit10    = if `test $SPECCOPYNUM -eq 9 `; then numactl -m 1 --physcpubind=9 sh run.sh; fi
submit11    = if `test $SPECCOPYNUM -eq 10 `; then numactl -m 1 --physcpubind=10 sh run.sh; fi
submit12    = if `test $SPECCOPYNUM -eq 11 `; then numactl -m 1 --physcpubind=11 sh run.sh; fi
submit13    = if `test $SPECCOPYNUM -eq 12 `; then numactl -m 0 --physcpubind=12 sh run.sh; fi
submit14    = if `test $SPECCOPYNUM -eq 13 `; then numactl -m 0 --physcpubind=13 sh run.sh; fi
submit15    = if `test $SPECCOPYNUM -eq 14 `; then numactl -m 0 --physcpubind=14 sh run.sh; fi
submit16    = if `test $SPECCOPYNUM -eq 15 `; then numactl -m 0 --physcpubind=15 sh run.sh; fi
submit17    = if `test $SPECCOPYNUM -eq 16 `; then numactl -m 0 --physcpubind=16 sh run.sh; fi
submit18    = if `test $SPECCOPYNUM -eq 17 `; then numactl -m 0 --physcpubind=17 sh run.sh; fi
submit19    = if `test $SPECCOPYNUM -eq 18 `; then numactl -m 1 --physcpubind=18 sh run.sh; fi
submit20    = if `test $SPECCOPYNUM -eq 19 `; then numactl -m 1 --physcpubind=19 sh run.sh; fi
submit21    = if `test $SPECCOPYNUM -eq 20 `; then numactl -m 1 --physcpubind=20 sh run.sh; fi
submit22    = if `test $SPECCOPYNUM -eq 21 `; then numactl -m 1 --physcpubind=21 sh run.sh; fi
submit23    = if `test $SPECCOPYNUM -eq 22 `; then numactl -m 1 --physcpubind=22 sh run.sh; fi
submit24    = if `test $SPECCOPYNUM -eq 23 `; then numactl -m 1 --physcpubind=23 sh run.sh; fi

# ---- End inclusion of '/cpu2006/config/intel-sut.inc'

####################################################################
# Compiler options
# for Nehalem use -xSSE4.2
# for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3
####################################################################
default:
SSE          = -xSSE4.2
FASTNOSTATIC =  $(SSE) -ipo -O3 -no-prec-div
FAST =  $(SSE) -ipo -O3 -no-prec-div  -static

################################################################
#
# portability & libraries
#
#################### Portability Flags and Notes ############################

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

fp=default:
PORTABILITY = -DSPEC_CPU_LP64

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX


################################################################
# Tuning Flags
################################################################
#
# Base tuning default optimization
# Feedback directed optimization not allowed in baseline for CPU2006
# However there is no limit on the number of flags as long as the same
# flags are used in the same order for all benchmarks of a given language

471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP32_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    $(FASTNOSTATIC)  -opt-prefetch
CXXOPTIMIZE=  $(FASTNOSTATIC)  -opt-prefetch

fp=base=default=default:
OPTIMIZE=     $(FAST)
COPTIMIZE=    $(FAST)  -ansi-alias
CXXOPTIMIZE=  $(FAST)  -ansi-alias

################################################################
# Peak Tuning Flags int 2006 fast
################################################################
int=peak=default:
COPTIMIZE=         -ansi-alias -auto-ilp32
CXXOPTIMIZE=       -ansi-alias
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS   = -prof-gen
PASS2_CXXFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCXXFLAGS = -prof-gen
PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use

400.perlbench=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64
COPTIMIZE=
PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT
PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT

401.bzip2=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -opt-prefetch  -auto-ilp32 -ansi-alias
PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT
PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT

403.gcc=peak=default:
COPTIMIZE = $(FASTNOSTATIC)
feedback=0

429.mcf=peak=default:
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
#%ifdef %{physicallogical}
#submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
#%endif
####################################################################################################################################

445.gobmk=peak=default:
PASS1_CFLAGS     = -prof-gen
PASS2_CFLAGS     = $(SSE) -prof-use
PASS1_LDCFLAGS   = -prof-gen
PASS2_LDCFLAGS   = $(SSE) -prof-use

456.hmmer=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE=  $(FASTNOSTATIC) -unroll2  -auto-ilp32
feedback=no
LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
#%ifdef %{physicallogical}
#submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
#%endif
####################################################################################################################################

458.sjeng=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -unroll4 -auto-ilp32
PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT
PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT

462.libquantum=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX
basepeak=yes
feedback=no
LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-melf_x86_64 -Wl,-hugetlbfs-link=BDT

464.h264ref=peak=default:
COPTIMIZE=  -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE=  -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
basepeak=yes

483.xalancbmk=peak=default:
basepeak=yes

################################################################
# Peak Tuning Flags for FP
################################################################
fp=peak=default:
COPTIMIZE=       -auto-ilp32
CXXOPTIMIZE=     -auto-ilp32
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use
PASS1_FFLAGS =   -prof-gen
PASS2_FFLAGS =   $(FASTNOSTATIC) -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  $(FASTNOSTATIC) -prof-use

410.bwaves=peak=default:
OPTIMIZE= -static
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
#%ifdef %{physicallogical}
#submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
#%endif
####################################################################################################################################

416.gamess=peak=default:
OPTIMIZE= -unroll2 -inline-level=0  -scalar-rep- -static
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
#%ifdef %{physicallogical}
#submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
#%endif
####################################################################################################################################

433.milc=peak=default:
OPTIMIZE= -static

434.zeusmp=peak=default:
basepeak=yes
feedback=0

435.gromacs=peak=default:
OPTIMIZE= -opt-prefetch -static

436.cactusADM=peak=default:
basepeak=yes

437.leslie3d=peak=default:
OPTIMIZE=     $(FASTNOSTATIC)
feedback=no
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
#%ifdef %{physicallogical}
#submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
#%endif
####################################################################################################################################

444.namd=peak=default:
CXXOPTIMIZE= -fno-alias -auto-ilp32

447.dealII=peak=default:
OPTIMIZE= -static

450.soplex=peak=default:
PORTABILITY =
CXX= icpc -m32
OPTIMIZE= -opt-malloc-options=3
CXXOPTIMIZE=
PASS1_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT
PASS2_LDOPT= -B /usr/share/libhugetlbfs/ -Wl,-hugetlbfs-link=BDT
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
#%ifdef %{physicallogical}
#submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
#%endif
####################################################################################################################################

453.povray=peak=default:
CXXOPTIMIZE= -unroll4  -ansi-alias

454.calculix=peak=default:
basepeak=yes

459.GemsFDTD=peak=default:
basepeak=yes
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
#%ifdef %{physicallogical}
#submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
#%endif
####################################################################################################################################

465.tonto=peak=default:
OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3

470.lbm=peak=default:
OPTIMIZE= -opt-malloc-options=3 -ansi-alias -opt-prefetch -static
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
#%ifdef %{physicallogical}
#submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
#%endif
####################################################################################################################################

481.wrf=peak=default:
basepeak=yes
feedback=0

482.sphinx3=peak=default:
PORTABILITY=
CC= icc -m32
OPTIMIZE= $(FASTNOSTATIC)
COPTIMIZE= -unroll2
feedback=no

#################################################################
# (Edit this to match your system)
#################################################################

default=default=default=default:
license_num      = 3
test_sponsor     = Hewlett-Packard Company
hw_avail         = Feb-2011
sw_avail         = Dec-2010
tester           = Hewlett-Packard Company
hw_cpu_name      = Intel Xeon X5690
hw_cpu_char      = Intel Turbo Boost Technology up to 3.73 GHz
hw_cpu_mhz       = 3467
hw_disk          = 1 x 500 GB 7.2 K SATA
hw_fpu           = Integrated
hw_memory        = 96 GB (12 x 8 GB 2Rx4 PC3-10600R-9, ECC)
hw_model000      = ProLiant DL160 G6
hw_model001      = (3.46 GHz, Intel Xeon X5690)
hw_ncpuorder     = 1,2 chips
hw_ncores        = 12
hw_nchips        = 2
hw_ncoresperchip = 6
hw_nthreadspercore = 2
hw_other         = None
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 256 KB I+D on chip per core
hw_tcache        = 12 MB I+D on chip per chip
hw_ocache        = None
hw_vendor        = Hewlett-Packard Company
prepared_by      = Hewlett-Packard Company
sw_file          = ext3
sw_os000         = SUSE Linux Enterprise Server 11 (x86_64) SP1,
sw_os001         = Kernel 2.6.32.12-0.7-default
sw_state         = Run level 3 (multi-user)
notes_submit_000 = numactl was used to bind copies to the cores
notes_submit_005 =The config file option 'submit' was used.
%ifdef %{no-numa}
notes_submit_000 = taskset was used to bind copies to the cores
%endif
notes_plat_000   = BIOS configuration:
notes_plat_005   =  Power Efficiency Mode set to Performance
notes_plat_010   =  Data Reuse set to Disabled

int=default=default=default:
sw_compiler001   = Intel(R) C++ Compiler XE for applications running on IA-32
sw_compiler002   = Version 12.0.1.116 Build 20101116
sw_base_ptrsize  = 32-bit
sw_peak_ptrsize  = 32/64-bit
sw_other001      = Microquill SmartHeap V9.01
sw_other002      = Binaries compiled on RHEL5.5 with binutils-2.17.50.0.6-14.el5

fp=default=default=default:
sw_compiler000   = Intel C++ and Fortran Intel 64 Compiler XE
sw_compiler001 = for applications running on Intel 64
sw_compiler002   = Version 12.0.1.116 Build 20101116
sw_base_ptrsize  = 64-bit
sw_peak_ptrsize  = 32/64-bit
sw_other         = None




# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.

470.lbm:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


465.tonto:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


447.dealII:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


435.gromacs:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1


416.gamess:
# The following setting was inserted automatically as a result of
# post-run basepeak application.
basepeak = 1

default:
flagsurl000 = http://www.spec.org/cpu2006/flags/Intel-ic12.0-linux64-revA.xml
flagsurl001 = http://www.spec.org/cpu2006/flags/HP-Intel-Linux-Settings-flags.20110216.00.xml
notes_os_000 = 'nodev   /mnt/hugepages   hugetlbfs  defaults   0 0' added to /etc/fstab
notes_os_005 = 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run
notes_os_010 = echo 10800 > /proc/sys/vm/nr_hugepages
notes_os_015 = export HUGETLB_MORECORE=yes
notes_os_020 = export LD_PRELOAD=/usr/lib64/libhugetlbfs.so
notes_000 = Binaries were compiled on RHEL5.5 with Binutils binutils-2.17.50.0.6-14.el5