# Invocation command line:
# /cpu2006/bin/runspec -c fsc-ic101-speed -T all --input ref -n 3 -o all fp
# output_root was not used for this run
############################################################################
##########################################################
# SPEC CPU2006 v1.1 Intel SLES10 x64 config file         #
# Intel Compiler 10.1 for Linux Intel EM64T (mostly)     #
# for speed runs only                                    #
# May 2008                                             #
##########################################################

action      = validate
tune        = base
ext         = cpu2006.11.ic101.20080425.speed
PATHSEP     = /
check_md5=1
reportable=1
mean_anyway = 1

flagsurl000= http://www.spec.org/cpu2006/flags/flags-ic101-linux-intel64.xml

#include: SUT.inc
#  ----- Begin inclusion of 'SUT.inc'
############################################################################
# To avoid conflicts in the numbering of the notes,
# please use only 900 and higher numbers.

# Use of thread-binding controlled by macro

%ifdef %{binding}
use_submit_for_speed=1
submit = /usr/bin/taskset -c $SPECCOPYNUM $command

# submit0 = MYMASK=\$((1<<$SPECCOPYNUM))
# submit1 = /usr/bin/taskset \$MYMASK $command

# submit= MYMASK=\$((1<<\$SPECCOPYNUM)) ; /usr/bin/taskset \$MYMASK $command
# submit=MYMASK=`printf '0x%x' \$((1<<$SPECCOPYNUM))` ; /usr/bin/taskset \$MYMASK $command
notes915=taskset has been used to bind processes to CPUs
%endif

################################################################
# System information
# If some remarks about BIOS or Firmware are needed, place them here.
################################################################

default=default=default=default:
notes_os_000= 'ulimit -s unlimited' was used to set the stacksize to unlimited prior to run
notes_os_005= OMP_NUM_THREADS set to number of cores (default)
notes_plat_000= BIOS configuration:
# notes_plat015= Enhanced Speedstep Technology = Disable
# notes_plat020= Hardware Prefetch = Disable, Adjacent Sector Prefetch = Disable
notes_plat_005= Hardware Prefetch = Enable, Adjacent Sector Prefetch = Enable
# notes_plat020= Hardware Prefetch = Enable, Adjacent Sector Prefetch = Disable

################################################################
# About Fujitsu Siemens Computers
################################################################

default=default=default=default:
notes_000=
notes_005= For information about Fujitsu Siemens Computers please see:
notes_010= http://www.fujitsu-siemens.com

# Blank line at the end
notes_015=

################################################################
# Description Hardware and Software
################################################################

default=default=default=default:
hw_vendor          = Fujitsu Siemens Computers
hw_model           = PRIMERGY RX200 S4, Intel Xeon E5405, 2.0 GHz
hw_cpu_name        = Intel Xeon E5405
hw_cpu_char        = 1333 MHz system bus
hw_cpu_mhz         = 2000
hw_fpu             = Integrated
#
hw_nchips          = 2
hw_ncores          = 8
hw_ncoresperchip   = 4
hw_nthreadspercore = 1
#
hw_ncpuorder       = 1,2 chips
hw_pcache          = 32 KB I + 32 KB D on chip per core
hw_scache          = 12 MB I+D on chip per chip, 6 MB shared / 2 cores
# hw_scache          = 6 MB I+D on chip per chip
hw_tcache          = None
hw_ocache          = None
hw_memory          = 16 GB (8x2 GB PC2-5300F, 2 rank, CL 5-5-5, ECC)
hw_disk            = 1x SAS, 73 GB, 15000 rpm
hw_other           = None
#
sw_file            = ext3
sw_state           = Multi-User Run Level 3
#
license_num        = 22
test_sponsor       = Fujitsu Siemens Computers
tester             = Fujitsu Siemens Computers
# test_date          = Jul-2008
hw_avail           = Dec-2007
prepared_by        = Fujitsu Siemens Computers
# ---- End inclusion of '/cpu2006/config/SUT.inc'

################################################################
#			    	Notes section                  #
################################################################

int=default=default=default:
notes_comp_010 = All binaries were built with 32-bit Intel compiler except:
notes_comp_020 = 401.bzip2 and 456.hmmer in peak were built with 64-bit Intel compiler.

fp=default=default=default:
notes_comp_000 = All binaries were built with 64-bit Intel compiler except:
notes_comp_005 = 450.soplex, 470.lbm and 482.sphinx3 in peak were built with 32-bit Intel compiler.

default=default=default=default:
# notes_port_010 = All portabilty flags have been approved

# notes_base_010 = -fast always used

# notes_peak_010 = using feedback optimization
# notes_peak_015 = Some benchmarks same for base and peak

# note_os_010 = Magic Vista was used

# notes010 ... General notes, see also SUT.inc

# notes_submit_010 = see SUT.inc
# notes_plat_000 = see SUT.inc
# notes_part_010 = only used for ...; would be in SUT.inc

################################################################
#			 End of Notes section                  #
################################################################

################################################################
#			 Compiler selection                    #
################################################################

# Environment variables are expected to be set for 64-bit compilers

CC64  = icc
CXX64 = icpc
FC64  = ifort

# Settings for 32-bit compilers

COMPILER_DIR_CC32 = /opt/intel/cc/10.1.008
CC32 = $(COMPILER_DIR_CC32)/bin/icc -L$(COMPILER_DIR_CC32)/lib -I$(COMPILER_DIR_CC32)/include
CXX32 = $(COMPILER_DIR_CC32)/bin/icpc -L$(COMPILER_DIR_CC32)/lib -I$(COMPILER_DIR_CC32)/include

# Default: 32-bit for int; 64-bit for fp

int=default=default=default:
CC  = $(CC32)
CXX = $(CXX32)
OBJ = .o
SMARTHEAP_DIR = /opt/SmartHeap_8.1/lib
sw_base_ptrsize = 32-bit
sw_peak_ptrsize = 32/64-bit

fp=default=default=default:
CC  = $(CC64)
CXX = $(CXX64)
FC  = $(FC64)
OBJ = .o
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = 32/64-bit

################################################################
# portability & libraries
#################### Portability Flags ############################

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

fp=default:
PORTABILITY = -DSPEC_CPU_LP64

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX

################################################################
# Base Tuning Flags
################################################################

# Extralib for C++ programs in INT
471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    -fast -vec-guard-write -parallel -par-runtime-control
CXXOPTIMIZE=  -xT -ipo -O3 -no-prec-div

fp=base=default=default:
OPTIMIZE=    -fast -parallel

################################################################
# Peak Tuning Flags int 2006
################################################################

int=peak=default:
COPTIMIZE=       -fast -auto-ilp32
CXXOPTIMIZE=     -xT -ipo -O3 -no-prec-div
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  -prof-use

400.perlbench=peak=default:
COPTIMIZE= -fast -ansi-alias -prefetch

401.bzip2=peak=default:
CC = $(CC64)
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -fast -prefetch -auto-ilp32

403.gcc=peak=default:
COPTIMIZE = -fast -inline-calloc -opt-malloc-options=3
feedback=0

429.mcf=peak=default:
COPTIMIZE= -fast -prefetch
feedback=0

445.gobmk=peak=default:
COPTIMIZE= -xT -O2 -ipo -no-prec-div -ansi-alias

456.hmmer=peak=default:
CC = $(CC64)
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -fast -unroll2 -ansi-alias -opt-multi-version-aggressive -auto-ilp32
feedback=0

458.sjeng=peak=default:
COPTIMIZE= -fast -unroll4

462.libquantum=peak=default:
COPTIMIZE= -fast -unroll4 -Ob0 -prefetch -opt-streaming-stores always -vec-guard-write -opt-malloc-options=3 -parallel -par-runtime-control
feedback=no

464.h264ref=peak=default:
COPTIMIZE= -fast -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE= -xT -O3 -ipo -no-prec-div -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
CXXOPTIMIZE= -xT -O3 -ipo -no-prec-div -ansi-alias -opt-ra-region-strategy=routine

483.xalancbmk=peak=default:
basepeak=yes

################################################################
# Peak Tuning Flags for FP
################################################################

fp=peak=default:
OPTIMIZE=    -fast
COPTIMIZE=   -auto-ilp32
CXXOPTIMIZE= -auto-ilp32
PASS1_CFLAGS =   -prof-gen
PASS2_CFLAGS =   -prof-use
PASS1_CXXFLAGS = -prof-gen
PASS2_CXXFLAGS = -prof-use
PASS1_FFLAGS =   -prof-gen
PASS2_FFLAGS =   -prof-use
PASS1_LDFLAGS =  -prof-gen
PASS2_LDFLAGS =  -prof-use

410.bwaves=peak=default:
OPTIMIZE=    -fast -prefetch -parallel
feedback=0

416.gamess=peak=default:
OPTIMIZE= -fast -unroll2 -Ob0 -ansi-alias -scalar-rep-

433.milc=peak=default:
OPTIMIZE= -fast -fno-alias

435.gromacs=peak=default:
OPTIMIZE=    -fast -prefetch

436.cactusADM=peak=default:
OPTIMIZE= -fast -unroll2 -prefetch -parallel

437.leslie3d=peak=default:
basepeak=yes

444.namd=peak=default:
CXXOPTIMIZE= -fast -fno-alias -auto-ilp32

447.dealII=peak=default:
CXXOPTIMIZE= -fast -unroll2 -ansi-alias -scalar-rep-

450.soplex=peak=default:
PORTABILITY =
CXX = $(CXX32)
OPTIMIZE= -fast -opt-malloc-options=3
CXXOPTIMIZE=

453.povray=peak=default:
CXXOPTIMIZE= -fast -unroll4 -ansi-alias

454.calculix=peak=default:
OPTIMIZE= -fast -unroll-aggressive
feedback=0

459.GemsFDTD=peak=default:
OPTIMIZE= -fast -unroll2 -Ob0 -prefetch -parallel

465.tonto=peak=default:
OPTIMIZE= -fast -unroll4 -auto

470.lbm=peak=default:
PORTABILITY =
CC = $(CC32)
COPTIMIZE= -unroll2 -scalar-rep- -prefetch -opt-malloc-options=3

481.wrf=peak=default:
OPTIMIZE= -fast -parallel -prefetch
feedback=0

482.sphinx3=peak=default:
PORTABILITY =
CC = $(CC32)
COPTIMIZE= -unroll2
feedback=no

#################################################################
# Software description (see also SUT.inc)
#################################################################

default=default=default=default:
sw_os000         = SuSE Linux Enterprise Server 10 (x86_64)
sw_os001         = with SP2, kernel 2.6.16.60-0.21-smp

int=default=default=default:
sw_compiler001   = Intel C++ Compiler for Linux32 and Linux64,
sw_compiler002   = Version 10.1, Build 20070913
sw_other000      = Microquill SmartHeap Library, Version 8.1
sw_other001      = binutils-2.17.50.0.5-0.1.x86_64
sw_avail         = Nov-2007

fp=default=default=default:
sw_compiler000   = Intel C++ and Fortran Compiler for Linux32
sw_compiler001   = and Linux64, version 10.1, Build 20070913
sw_other         = binutils-2.17.50.0.5-0.1.x86_64
sw_avail         = May-2008