CPU2006 license: | 6 | Test date: | Nov-2006 |
---|---|---|---|
Test sponsor: | Sun Microsystems | Hardware Availability: | Oct-2006 |
Tested by: | Sun Microsystems | Software Availability: | Jul-2006 |
Hardware | |
---|---|
CPU Name: | AMD Opteron 2220 SE |
CPU Characteristics: | |
CPU MHz: | 2800 |
FPU: | Integrated |
CPU(s) enabled: | 4 cores, 2 chips, 2 cores/chip |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 64 KB I + 64 KB D on chip per core |
Secondary Cache: | 1 MB I+D on chip per core |
L3 Cache: | None |
Other Cache: | None |
Memory: | 16 GB (8x2GB, DDR2-667 CL5 ECC REG, Dual Rank) |
Disk Subsystem: | SAS, 72 GB, 10K RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Solaris 10 6/06 |
Compiler: | Sun Studio 11 with Patches |
Auto Parallel: | No |
File System: | ufs |
System State: | Default |
Base Pointers: | 64-bit |
Peak Pointers: | 32/64-bit |
Other Software: | None |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 4 | 750 | 52.1 | 751 | 52.1 | 750 | 52.1 | 4 | 701 | 55.7 | 705 | 55.5 | 703 | 55.6 |
401.bzip2 | 4 | 1098 | 35.2 | 1101 | 35.1 | 1099 | 35.1 | 4 | 1027 | 37.6 | 1020 | 37.8 | 1019 | 37.9 |
403.gcc | 4 | 1063 | 30.3 | 1061 | 30.3 | 1065 | 30.2 | 4 | 878 | 36.7 | 875 | 36.8 | 872 | 36.9 |
429.mcf | 4 | 1340 | 27.2 | 1342 | 27.2 | 1346 | 27.1 | 4 | 836 | 43.6 | 833 | 43.8 | 833 | 43.8 |
445.gobmk | 4 | 757 | 55.4 | 758 | 55.4 | 757 | 55.4 | 4 | 651 | 64.4 | 651 | 64.5 | 651 | 64.5 |
456.hmmer | 4 | 653 | 57.1 | 653 | 57.2 | 653 | 57.2 | 4 | 475 | 78.6 | 475 | 78.6 | 475 | 78.6 |
458.sjeng | 4 | 877 | 55.2 | 876 | 55.3 | 877 | 55.2 | 4 | 828 | 58.5 | 826 | 58.6 | 825 | 58.6 |
462.libquantum | 4 | 1704 | 48.6 | 1701 | 48.7 | 1705 | 48.6 | 4 | 1578 | 52.5 | 1578 | 52.5 | 1578 | 52.5 |
464.h264ref | 4 | 1401 | 63.2 | 1401 | 63.2 | 1404 | 63.1 | 4 | 1316 | 67.3 | 1315 | 67.3 | 1313 | 67.4 |
471.omnetpp | 4 | 881 | 28.4 | 882 | 28.3 | 884 | 28.3 | 4 | 775 | 32.3 | 774 | 32.3 | 774 | 32.3 |
473.astar | 4 | 866 | 32.4 | 866 | 32.4 | 866 | 32.4 | 4 | 802 | 35.0 | 803 | 35.0 | 802 | 35.0 |
483.xalancbmk | 4 | 716 | 38.5 | 717 | 38.5 | 717 | 38.5 | 4 | 631 | 43.7 | 632 | 43.7 | 632 | 43.7 |
Processes were bound to cores using "submit" and "pbind". ulimit -s 131072 (shell): increases stack The following patches were applied to Sun Studio 11 compiler: 120759-07 : x86/x64 121016-03 : x86 C 121020-03 : x86 F90 121018-03 : x86 C++
Default BIOS settings was used. This result was measured on the Sun Fire X4100 M2. In addition, Sun has submitted the same result for the Sun Fire X4200 M2, which is electronically equivalent to the Sun Fire X4100 M2.
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_SOLARIS_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
403.gcc: | -DSPEC_CPU_LP64 -DSPEC_CPU_SOLARIS |
429.mcf: | -DSPEC_CPU_LP64 |
445.gobmk: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LP64 -DSPEC_CPU_SOLARIS |
464.h264ref: | -DSPEC_CPU_LP64 |
471.omnetpp: | -DSPEC_CPU_LP64 |
473.astar: | -DSPEC_CPU_LP64 |
483.xalancbmk: | -DSPEC_CPU_LP64 -DSPEC_CPU_SOLARIS |
-fast -xipo=2 -xarch=amd64a |
-fast -xipo=2 -xarch=amd64a -library=stlport4 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_SOLARIS_X64 |
403.gcc: | -DSPEC_CPU_SOLARIS |
462.libquantum: | -DSPEC_CPU_SOLARIS |
483.xalancbmk: | -DSPEC_CPU_SOLARIS |
471.omnetpp: | -fast -xipo=2 -xprefetch_level=3 -xpagesize=2m -xarch=sse2a -Qoption ube -fsimple=3 -library=stlport4 |
473.astar: | -fast -xrestrict -xarch=amd64a -xipo=2 -xprefetch_level=3 -xpagesize=2m -library=stlport4 |
483.xalancbmk: | -xprofile=collect:./feedback(pass 1) -xprofile=use:./feedback(pass 2) -fast -xipo=2 -xarch=sse2a -xpagesize=2m -library=stlport4 |