CPU2006 license: | 6 | Test date: | Nov-2006 |
---|---|---|---|
Test sponsor: | Sun Microsystems | Hardware Availability: | Aug-2006 |
Tested by: | Sun Microsystems | Software Availability: | Jul-2006 |
Hardware | |
---|---|
CPU Name: | AMD Opteron 2218 |
CPU Characteristics: | |
CPU MHz: | 2600 |
FPU: | Integrated |
CPU(s) enabled: | 4 cores, 2 chips, 2 cores/chip |
CPU(s) orderable: | 1,2 chips |
Primary Cache: | 64 KB I + 64 KB D on chip per core |
Secondary Cache: | 1 MB I+D on chip per core |
L3 Cache: | None |
Other Cache: | None |
Memory: | 16 GB (8x2GB, DDR2-667 CL5 ECC REG, Dual Rank) |
Disk Subsystem: | SATA, 250 GB, 7200 RPM |
Other Hardware: | None |
Software | |
---|---|
Operating System: | Solaris 10 6/06 |
Compiler: | Sun Studio 11 with Patches |
Auto Parallel: | No |
File System: | ufs |
System State: | Default |
Base Pointers: | 64-bit |
Peak Pointers: | 32/64-bit |
Other Software: | None |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
400.perlbench | 4 | 796 | 49.1 | 797 | 49.0 | 797 | 49.0 | 4 | 749 | 52.2 | 761 | 51.3 | 749 | 52.1 |
401.bzip2 | 4 | 1142 | 33.8 | 1146 | 33.7 | 1146 | 33.7 | 4 | 1086 | 35.5 | 1056 | 36.5 | 1055 | 36.6 |
403.gcc | 4 | 1080 | 29.8 | 1080 | 29.8 | 1080 | 29.8 | 4 | 892 | 36.1 | 895 | 36.0 | 890 | 36.2 |
429.mcf | 4 | 1333 | 27.4 | 1336 | 27.3 | 1328 | 27.5 | 4 | 849 | 43.0 | 850 | 42.9 | 850 | 42.9 |
445.gobmk | 4 | 806 | 52.0 | 806 | 52.0 | 808 | 51.9 | 4 | 692 | 60.6 | 692 | 60.6 | 692 | 60.6 |
456.hmmer | 4 | 693 | 53.9 | 690 | 54.1 | 691 | 54.0 | 4 | 505 | 73.9 | 504 | 74.1 | 504 | 74.1 |
458.sjeng | 4 | 944 | 51.3 | 945 | 51.2 | 945 | 51.2 | 4 | 889 | 54.4 | 890 | 54.4 | 890 | 54.4 |
462.libquantum | 4 | 1704 | 48.6 | 1704 | 48.6 | 1700 | 48.8 | 4 | 1558 | 53.2 | 1559 | 53.2 | 1559 | 53.2 |
464.h264ref | 4 | 1491 | 59.4 | 1494 | 59.3 | 1493 | 59.3 | 4 | 1394 | 63.5 | 1392 | 63.6 | 1395 | 63.5 |
471.omnetpp | 4 | 895 | 27.9 | 895 | 27.9 | 892 | 28.0 | 4 | 792 | 31.6 | 792 | 31.6 | 793 | 31.5 |
473.astar | 4 | 892 | 31.5 | 893 | 31.5 | 893 | 31.4 | 4 | 826 | 34.0 | 824 | 34.1 | 825 | 34.0 |
483.xalancbmk | 4 | 749 | 36.9 | 748 | 36.9 | 747 | 36.9 | 4 | 669 | 41.2 | 668 | 41.3 | 667 | 41.4 |
Processes were bound to cores using "submit" and "pbind". ulimit -s 131072 (shell): increases stack The following patches were applied to Sun Studio 11 compiler: 120759-07 : x86/x64 121016-03 : x86 C 121020-03 : x86 F90 121018-03 : x86 C++
Default BIOS settings was used.
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_SOLARIS_X64 |
401.bzip2: | -DSPEC_CPU_LP64 |
403.gcc: | -DSPEC_CPU_LP64 -DSPEC_CPU_SOLARIS |
429.mcf: | -DSPEC_CPU_LP64 |
445.gobmk: | -DSPEC_CPU_LP64 |
456.hmmer: | -DSPEC_CPU_LP64 |
458.sjeng: | -DSPEC_CPU_LP64 |
462.libquantum: | -DSPEC_CPU_LP64 -DSPEC_CPU_SOLARIS |
464.h264ref: | -DSPEC_CPU_LP64 |
471.omnetpp: | -DSPEC_CPU_LP64 |
473.astar: | -DSPEC_CPU_LP64 |
483.xalancbmk: | -DSPEC_CPU_LP64 -DSPEC_CPU_SOLARIS |
-fast -xipo=2 -xarch=amd64a |
-fast -xipo=2 -xarch=amd64a -library=stlport4 |
400.perlbench: | -DSPEC_CPU_LP64 -DSPEC_CPU_SOLARIS_X64 |
403.gcc: | -DSPEC_CPU_SOLARIS |
462.libquantum: | -DSPEC_CPU_SOLARIS |
483.xalancbmk: | -DSPEC_CPU_SOLARIS |
471.omnetpp: | -fast -xipo=2 -xprefetch_level=3 -xpagesize=2m -xarch=sse2a -Qoption ube -fsimple=3 -library=stlport4 |
473.astar: | -fast -xrestrict -xarch=amd64a -xipo=2 -xprefetch_level=3 -xpagesize=2m -library=stlport4 |
483.xalancbmk: | -xprofile=collect:./feedback(pass 1) -xprofile=use:./feedback(pass 2) -fast -xipo=2 -xarch=sse2a -xpagesize=2m -library=stlport4 |