![]() |
CINT2000 Result Copyright © 1999-2005 Standard Performance Evaluation Corporation |
Fujitsu Siemens Computers PRIMERGY RX200 S3, Intel Xeon 5120 processor, 1.86 GHz |
|
SPEC license # 22 | Tested by: Fujitsu Siemens Computers | Test date: Jun-2006 | Hardware Avail: Jul-2006 | Software Avail: May-2006 |
![]() |
Benchmark | Base Copies |
Base Runtime |
Base Ratio |
Copies | Runtime | Ratio |
---|---|---|---|---|---|---|---|
![]() ![]() |
164.gzip | 4 | 124 | 52.4 | 4 | 124 | 52.4 |
![]() ![]() |
175.vpr | 4 | 113 | 57.3 | 4 | 113 | 57.3 |
![]() ![]() |
176.gcc | 4 | 55.0 | 92.7 | 4 | 55.0 | 92.7 |
![]() ![]() |
181.mcf | 4 | 121 | 69.1 | 4 | 121 | 69.1 |
![]() ![]() |
186.crafty | 4 | 58.8 | 78.9 | 4 | 58.8 | 78.9 |
![]() ![]() |
197.parser | 4 | 127 | 65.7 | 4 | 127 | 65.7 |
![]() ![]() |
252.eon | 4 | 53.8 | 112 | 4 | 53.8 | 112 |
![]() ![]() |
253.perlbmk | 4 | 82.1 | 102 | 4 | 82.1 | 102 |
![]() ![]() |
254.gap | 4 | 63.8 | 80.1 | 4 | 63.8 | 80.1 |
![]() ![]() |
255.vortex | 4 | 65.3 | 135 | 4 | 65.3 | 135 |
![]() ![]() |
256.bzip2 | 4 | 120 | 58.2 | 4 | 120 | 58.2 |
![]() ![]() |
300.twolf | 4 | 141 | 98.8 | 4 | 141 | 98.8 |
SPECint_rate_base2000 | 80.2 | ||||||
SPECint_rate2000 | 80.2 |
|
|
Notes / Tuning Information |
---|
GENERAL +FDO: PASS1=-Qprof_gen PASS2=-Qprof_use Portability flags 176.gcc: -Dalloca=_alloca /F10000000 186.crafy: -DNT_i386 253.perlbmk: -DSPEC_CPU2000_NTOS -DPERLDLL /MT 254.gap: -DSYS_HAS_CALLOC_PROTO -DSYS_HAS_MALLOC_PROTO Base tuning flags for C programs: -fast +FDO shlW32M.lib for C++ programs: -fast -Qcxx_features +FDO shlW32M.lib Peak tuning flags same as baseline (basepeak=true set globally) The system bus runs at 1066 MHz This result was measured with 32-bit binaries using the 32-bit version of the operating system. For information about Fujitsu Siemens Computers in your country please see: http://www.fujitsu-siemens.com/countries |
First published at SPEC.org on 27-Jun-2006
Generated on Tue Jun 27 17:23:12 2006 by SPEC CPU2000 HTML formatter v1.01