![]() |
CINT2000 Result Copyright © 1999-2005 Standard Performance Evaluation Corporation |
Fujitsu Siemens Computers PRIMERGY RX200 S3, Intel Xeon 5120 processor, 1.86 GHz |
|
SPEC license # 22 | Tested by: Fujitsu Siemens Computers | Test date: Jun-2006 | Hardware Avail: Jul-2006 | Software Avail: May-2006 |
![]() |
Benchmark | Base Copies |
Base Runtime |
Base Ratio |
Copies | Runtime | Ratio |
---|---|---|---|---|---|---|---|
![]() ![]() |
164.gzip | 2 | 123 | 26.4 | 2 | 123 | 26.4 |
![]() ![]() |
175.vpr | 2 | 110 | 29.5 | 2 | 110 | 29.5 |
![]() ![]() |
176.gcc | 2 | 54.0 | 47.2 | 2 | 54.0 | 47.2 |
![]() ![]() |
181.mcf | 2 | 107 | 39.0 | 2 | 107 | 39.0 |
![]() ![]() |
186.crafty | 2 | 58.9 | 39.4 | 2 | 58.9 | 39.4 |
![]() ![]() |
197.parser | 2 | 127 | 32.9 | 2 | 127 | 32.9 |
![]() ![]() |
252.eon | 2 | 53.8 | 56.0 | 2 | 53.8 | 56.0 |
![]() ![]() |
253.perlbmk | 2 | 81.7 | 51.1 | 2 | 81.7 | 51.1 |
![]() ![]() |
254.gap | 2 | 61.2 | 41.7 | 2 | 61.2 | 41.7 |
![]() ![]() |
255.vortex | 2 | 64.5 | 68.4 | 2 | 64.5 | 68.4 |
![]() ![]() |
256.bzip2 | 2 | 117 | 29.7 | 2 | 117 | 29.7 |
![]() ![]() |
300.twolf | 2 | 141 | 49.4 | 2 | 141 | 49.4 |
SPECint_rate_base2000 | 41.0 | ||||||
SPECint_rate2000 | 41.0 |
|
|
Notes / Tuning Information |
---|
GENERAL +FDO: PASS1=-Qprof_gen PASS2=-Qprof_use Portability flags 176.gcc: -Dalloca=_alloca /F10000000 186.crafy: -DNT_i386 253.perlbmk: -DSPEC_CPU2000_NTOS -DPERLDLL /MT 254.gap: -DSYS_HAS_CALLOC_PROTO -DSYS_HAS_MALLOC_PROTO Base tuning flags for C programs: -fast +FDO shlW32M.lib for C++ programs: -fast -Qcxx_features +FDO shlW32M.lib Peak tuning flags same as baseline (basepeak=true set globally) The system bus runs at 1066 MHz This result was measured with 32-bit binaries using the 32-bit version of the operating system. For information about Fujitsu Siemens Computers in your country please see: http://www.fujitsu-siemens.com/countries |
First published at SPEC.org on 27-Jun-2006
Generated on Tue Jun 27 17:23:11 2006 by SPEC CPU2000 HTML formatter v1.01