![]() |
CINT2000 Result Copyright © 1999-2005 Standard Performance Evaluation Corporation |
Fujitsu Siemens Computers PRIMERGY RX200 S3, Intel Xeon 5110 processor, 1.60 GHz |
|
SPEC license # 22 | Tested by: Fujitsu Siemens Computers | Test date: May-2006 | Hardware Avail: Jul-2006 | Software Avail: May-2006 |
![]() |
Benchmark | Base Copies |
Base Runtime |
Base Ratio |
Copies | Runtime | Ratio |
---|---|---|---|---|---|---|---|
![]() ![]() |
164.gzip | 4 | 144 | 45.1 | 4 | 144 | 45.1 |
![]() ![]() |
175.vpr | 4 | 127 | 51.3 | 4 | 127 | 51.3 |
![]() ![]() |
176.gcc | 4 | 62.5 | 81.6 | 4 | 62.5 | 81.6 |
![]() ![]() |
181.mcf | 4 | 126 | 66.4 | 4 | 126 | 66.4 |
![]() ![]() |
186.crafty | 4 | 68.4 | 67.8 | 4 | 68.4 | 67.8 |
![]() ![]() |
197.parser | 4 | 145 | 57.4 | 4 | 145 | 57.4 |
![]() ![]() |
252.eon | 4 | 62.9 | 95.9 | 4 | 62.9 | 95.9 |
![]() ![]() |
253.perlbmk | 4 | 95.2 | 87.7 | 4 | 95.2 | 87.7 |
![]() ![]() |
254.gap | 4 | 70.6 | 72.3 | 4 | 70.6 | 72.3 |
![]() ![]() |
255.vortex | 4 | 73.0 | 121 | 4 | 73.0 | 121 |
![]() ![]() |
256.bzip2 | 4 | 136 | 51.1 | 4 | 136 | 51.1 |
![]() ![]() |
300.twolf | 4 | 165 | 84.5 | 4 | 165 | 84.5 |
SPECint_rate_base2000 | 70.7 | ||||||
SPECint_rate2000 | 70.7 |
|
|
Notes / Tuning Information |
---|
GENERAL +FDO: PASS1=-Qprof_gen PASS2=-Qprof_use Portability flags 176.gcc: -Dalloca=_alloca /F10000000 186.crafy: -DNT_i386 253.perlbmk: -DSPEC_CPU2000_NTOS -DPERLDLL /MT 254.gap: -DSYS_HAS_CALLOC_PROTO -DSYS_HAS_MALLOC_PROTO Base tuning flags for C programs: -fast +FDO shlW32M.lib for C++ programs: -fast -Qcxx_features +FDO shlW32M.lib Peak tuning flags same as baseline (basepeak=true set globally) The system bus runs at 1066 MHz This result was measured with 32-bit binaries using the 32-bit version of the operating system. For information about Fujitsu Siemens Computers in your country please see: http://www.fujitsu-siemens.com/countries |
First published at SPEC.org on 27-Jun-2006
Generated on Tue Jun 27 17:23:08 2006 by SPEC CPU2000 HTML formatter v1.01