# Invocation command line: # /pdv/home/student/users/609bc1b89b8a955fb5270ebe25f0c37d/server2/ACCELV1/install/bin/runspec --config NF-s2-TeslaK20Xm.cfg --rebuild --device 0 opencl # output_root was not used for this run ############################################################################ # This is NF-s2-TeslaK20Xm.cfg # This is a modified version of Example-opencl-nvidia-simple.cfg # Last Update: 03 Jun 2014 ####################################################################### # Begin of SUT section ####################################################################### # System Description hw_model = 7047GR-TRF hw_memory000 = 256 GB (16 x 16 GB 2Rx8 PC3-12800R-9, ECC, hw_disk001 = GlusterFS network storage hw_disk002 = 2 mirroring nodes with 16 disks hardware RAID6 hw_disk003 = each hw_vendor = SuperMicro hw_avail = Nov-2012 # CPU description hw_cpu_mhz = 2500 hw_cpu_max_mhz = 3000 hw_ncores = 12 hw_nchips = 2 hw_ncoresperchip = 6 hw_nthreadspercore = 2 hw_ncpuorder = 2 hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 15 MB I+D on chip per chip hw_ocache = None # Accelerator description hw_accel_connect = PCIe 2.0 16x hw_accel_desc000 = NVIDIA Tesla K20Xm GPU, 2688 CUDA cores, 732 MHz hw_accel_desc001 = 5.6 GiB GDDR5 RAM - ECC activated hw_accel_ecc = Yes hw_accel_model = Tesla K20Xm hw_accel_name = NVIDIA Tesla K20Xm hw_accel_type = GPU hw_accel_vendor = NVIDIA sw_accel_driver = NVIDIA CUDA 6.0rc Driver Version 331.44 sw_compiler = Version 4.7.1 of GCC # Tester description license_num = HPG-052A prepared_by = Niko Fellner (niko.fellner@student.kit.edu) tester = Karlsruhe Institute of Technology (KIT) company_name = Karlsruhe Institute of Technology (KIT) test_sponsor = KIT Institute for Data Processing and Electronics display_order = 1a # Operating system, file system sw_os000 = openSUSE 12.2 (x86_64) sw_file = Default sw_base_ptrsize = 64-bit sw_other = NVIDIA CUDA 6.0rc Driver Version 331.44 sw_avail = Feb-2014 ####################################################################### # End of SUT section ####################################################################### # The header section of the config file. ext = compsys output_format = all teeout = yes teerunout = yes tune = base reportable = 1 action = validate flagsurl000 = http://www.spec.org/accel/flags/gcc_flags.20150303.00.xml # Compiler selection, versions, and dates. default=default=default=default: CC = gcc CXX = g++ FC = gfortran OPTIMIZE = -O2 LIBS = -lOpenCL EXTRA_LIBS = EXTRA_CXXFLAGS = EXTRA_CFLAGS = ####################################################################### # End of user-supplied information. ####################################################################### # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program notes_plat_sysinfo_005 = /pdv/home/student/users/609bc1b89b8a955fb5270ebe25f0c37d/server2/ACCELV1/install/Docs/sysinfo notes_plat_sysinfo_010 = $Rev: 6874 $ $Date:: 2013-11-20 #$ 0953404ef7e75a5f9bbb534c6de3f831 notes_plat_sysinfo_015 = running on ipepdvcompute2 Wed Jun 4 23:21:13 2014 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_030 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_035 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon(R) CPU E5-2640 0 @ 2.50GHz notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 24 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_070 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_075 = caution.) notes_plat_sysinfo_080 = cpu cores : 6 notes_plat_sysinfo_085 = siblings : 12 notes_plat_sysinfo_090 = physical 0: cores 0 1 2 3 4 5 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 notes_plat_sysinfo_100 = cache size : 15360 KB notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From /proc/meminfo notes_plat_sysinfo_115 = MemTotal: 264648676 kB notes_plat_sysinfo_120 = HugePages_Total: 0 notes_plat_sysinfo_125 = Hugepagesize: 2048 kB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = /usr/bin/lsb_release -d notes_plat_sysinfo_140 = openSUSE 12.2 (x86_64) notes_plat_sysinfo_145 = notes_plat_sysinfo_150 = From /etc/*release* /etc/*version* notes_plat_sysinfo_155 = SuSE-release: notes_plat_sysinfo_160 = openSUSE 12.2 (x86_64) notes_plat_sysinfo_165 = VERSION = 12.2 notes_plat_sysinfo_170 = CODENAME = Mantis notes_plat_sysinfo_175 = os-release: notes_plat_sysinfo_180 = NAME=openSUSE notes_plat_sysinfo_185 = VERSION="12.2 (Mantis)" notes_plat_sysinfo_190 = VERSION_ID="12.2" notes_plat_sysinfo_195 = PRETTY_NAME="openSUSE 12.2 (Mantis) (x86_64)" notes_plat_sysinfo_200 = ID=opensuse notes_plat_sysinfo_205 = ANSI_COLOR="0;32" notes_plat_sysinfo_210 = CPE_NAME="cpe:/o:opensuse:opensuse:12.2" notes_plat_sysinfo_215 = notes_plat_sysinfo_220 = uname -a: notes_plat_sysinfo_225 = Linux ipepdvcompute2 3.4.47-2.38-desktop #1 SMP PREEMPT Fri May 31 20:17:40 notes_plat_sysinfo_230 = UTC 2013 (3961086) x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = run-level 3 Apr 14 19:59 notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = SPEC is set to: notes_plat_sysinfo_255 = /pdv/home/student/users/609bc1b89b8a955fb5270ebe25f0c37d/server2/ACCELV1/install notes_plat_sysinfo_260 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_265 = 192.168.11.1:storage fuse.glusterfs 19T 16T 3.0T 84% /pdv notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_280 = notes_plat_sysinfo_285 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2640 hw_disk000 = 19 TB hw_memory001 = running at 1333 MHz) hw_nchips = 2 prepared_by = student (is never output, only tags rawfile) sw_file = fuse.glusterfs sw_os002 = Kernel 3.4.47-2.38-desktop sw_state = Run level 3 (multi-user) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: sw_peak_ptrsize = Not Applicable