# Invocation command line: # /store/hfeng/Accel/kit-39/bin/runspec --reportable --action validate --platform gpu --platform NVIDIA --tune base --device 0 --config sgi-opencl-nvidia-intel.cfg -i ref -I -n 3 opencl # output_root was not used for this run ############################################################################ # System Description hw_model000 =SGI Rackable C2110G-RP5 (Intel Xeon E5-2697 hw_model001 = v2, 2.70 GHz) hw_memory000 =128 GB (8 x 16 GB 2Rx4 PC3-14900R-13, ECC) hw_disk = hw_vendor =SGI hw_nthreadspercore = 2 hw_ncoresperchip = 12 hw_ncores = 24 # CPU description hw_cpu_mhz =2700 hw_cpu_max_mhz = 3500 hw_fpu = Integrated hw_ncpuorder = 1-2 chips hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_ocache = None hw_ncpu = # Tester description - edit the date, put your license number here! test_date = license_num =14 prepared_by = display_order = # Operating system, file system sw_os000 = sw_file = ####################################################################### # End of SUT section # If this config file were to be applied to several SUTs, edits would # be needed only ABOVE this point. ###################################################################### ###################################################################### # The header section of the config file. Must appear # before any instances of "default=" # # ext = how the binaries you generated will be identified # tune = specify "base" or "peak" or "all" # the rest are default values ext = intel.o3 output_format = asc #table = 0 teeout = no teerunout = yes tune = base ###################################################################### # Compiler selection, versions, and dates. # C and Fortran are used in both OMPM2001 and OMPL2001, so its # information appears under # default=default=default=default: # # sw_compiler = additional information describing the compiler # CC = how the C Compiler is invoked # FC = how the FORTRAN compiler is invoked default=default=default=default: sw_compiler000= Intel c/c++/Fortran Compiler XE, Version sw_compiler001 = 14.0.1.106 CC = icc CXX = icpc FC = ifort OPTIMIZE = -O3 LIBS = -L/usr/local/cuda/lib64 -lOpenCL EXTRA_LIBS = EXTRA_CXXFLAGS = -I/usr/local/cuda/include EXTRA_CFLAGS = -I/usr/local/cuda/include 101.tpacf=peak=default=default: EXTRA_OPTIMIZE = -DSPEC_ACCEL_WG_SIZE=%{wgsize} 103.stencil=peak=default=default: EXTRA_OPTIMIZE = -DSPEC_ACCEL_WG_SIZE=%{wgsize} 104.lbm=peak=default=default: EXTRA_OPTIMIZE = -DSPEC_ACCEL_WG_SIZE=%{wgsize} 112.spmv=peak=default=default: EXTRA_OPTIMIZE = -DSPEC_ACCEL_WG_SIZE=%{wgsize} 114.mriq=peak=default=default: EXTRA_OPTIMIZE = -DSPEC_ACCEL_WG_SIZE=%{wgsize} 117.bfs=peak=default=default: EXTRA_OPTIMIZE = -DSPEC_ACCEL_WG_SIZE=%{wgsize} 120.kmeans=peak=default=default: EXTRA_OPTIMIZE = -DSPEC_ACCEL_WG_SIZE=%{wgsize} 121.lavamd=peak=default=default: EXTRA_OPTIMIZE = -DSPEC_ACCEL_WG_SIZE=%{wgsize} 122.cfd=peak=default=default: EXTRA_OPTIMIZE = -DSPEC_ACCEL_WG_SIZE=%{wgsize} 124.hotspot=peak=default=default: EXTRA_OPTIMIZE = -DSPEC_ACCEL_WG_SIZE=%{wgsize} 125.lud=peak=default=default: EXTRA_OPTIMIZE = -DSPEC_ACCEL_WG_SIZE=%{wgsize} 126.ge=peak=default=default: EXTRA_OPTIMIZE = -DSPEC_ACCEL_WG_SIZE=%{wgsize} 127.srad=peak=default=default: EXTRA_OPTIMIZE = -DSPEC_ACCEL_WG_SIZE=%{wgsize} 128.heartwall=peak=default=default: EXTRA_OPTIMIZE = -DSPEC_ACCEL_WG_SIZE=%{wgsize} ####################################################################### # Large Portability # notes8xx are used for listing the portability flags that are needed # to get some of the programs to compile. While SPEC has made efforts # to ensure that programs do not require these types of flags, some # of the programs are advanced enough and the differences between # operating systems great enough that some programs require these. # # For portability flags for benchmarks not listed, duplicate the format # used below. #large=default=compsys=default: #notes800 = #notes801 = Portability: ####################################################################### # End of user-supplied information. ####################################################################### # The following settings were obtained by running 'specperl $[top]/Docs/sysinfo' default: notes_plat_sysinfo_000 = Sysinfo program /store/hfeng/Accel/kit-39/Docs/sysinfo notes_plat_sysinfo_005 = $Rev: 6874 $ $Date:: 2013-11-20 #$ 0953404ef7e75a5f9bbb534c6de3f831 notes_plat_sysinfo_010 = running on n009 Thu Feb 27 20:17:18 2014 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/accel/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 48 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 12 notes_plat_sysinfo_080 = siblings : 24 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 notes_plat_sysinfo_095 = cache size : 30720 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 132131352 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = Red Hat Enterprise Linux Server release 6.4 (Santiago) notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = redhat-release: Red Hat Enterprise Linux Server release 6.4 (Santiago) notes_plat_sysinfo_155 = sgi-accelerate-release: SGI Accelerate 1.6, Build 708r13.rhel6-1304102350 notes_plat_sysinfo_160 = sgi-foundation-release: SGI Foundation Software 2.8, Build notes_plat_sysinfo_165 = 708r13.rhel6-1304102350 notes_plat_sysinfo_170 = sgi-mpi-release: SGI MPI 1.6, Build 708r13.rhel6-1304102350 notes_plat_sysinfo_175 = sgi-release: SGI Performance Suite 1.6, Build 708r13.rhel6-1304102350 notes_plat_sysinfo_180 = sgi-upc-release: SGI UPC 1.6, Build 708r13.rhel6-1304102350 notes_plat_sysinfo_185 = sgi-xfs_xvm-release: SGI XFS-XVM 3.0, Build 707rp29.rhel6-1306102001 notes_plat_sysinfo_190 = system-release: Red Hat Enterprise Linux Server release 6.4 (Santiago) notes_plat_sysinfo_195 = system-release-cpe: cpe:/o:redhat:enterprise_linux:6server:ga:server notes_plat_sysinfo_200 = notes_plat_sysinfo_205 = uname -a: notes_plat_sysinfo_210 = Linux n009 2.6.32-358.el6.x86_64 #1 SMP Tue Jan 29 11:47:41 EST 2013 x86_64 notes_plat_sysinfo_215 = x86_64 x86_64 GNU/Linux notes_plat_sysinfo_220 = notes_plat_sysinfo_225 = run-level 5 Feb 18 14:36 notes_plat_sysinfo_230 = notes_plat_sysinfo_235 = SPEC is set to: /store/hfeng/Accel/kit-39 notes_plat_sysinfo_240 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_245 = service1-ib:/nas notes_plat_sysinfo_250 = nfs 15T 1.3T 14T 9% /nas notes_plat_sysinfo_255 = notes_plat_sysinfo_260 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2697 v2 hw_cpu_char = Twelve Core, 2.7 GHz, 8.0 GT/s QPI hw_disk000 = 15 TB 3x 6+2 RAID6, 24 x 900 GB SAS (Western hw_disk001 = Digital WD9001BKHG02D22, 10K RPM) hw_nchips = 2 prepared_by = Huiyu Feng hw_other = None hw_accel_model = Tesla K40m hw_accel_vendor = NVIDIA hw_accel_name = NVIDIA Tesla K40m hw_accel_type = GPU hw_accel_connect = PCIe 3.0 16x hw_accel_ecc = Yes hw_accel_desc000= Nvidia Tesla K40m, 12GB GDDR5 RAM, 745MHz, 2880 hw_accel_desc001 = CUDA Cores. sw_accel_driver = NVIDIA UNIX x86_64 Kernel Module 331.20 sw_file = NFSv3 IPoIB sw_os001 = Red Hat Enterprise Linux Server release 6.4 sw_os002 = (Santiago) sw_os003 = Kernel 2.6.32-358.el6.x86_64 sw_state = Run level 5 (Multi-users) sw_base_ptrsize = 64-bit # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: sw_peak_ptrsize = Not Applicable sw_other = CUDA 5.5 test_sponsor = SGI tester = SGI hw_avail = Nov-2013 sw_avail = Nov-2013 flagsurl000 = http://www.spec.org/accel/flags/SGI-Accel-OpenCL.xml hw_tcache000 = 30 MB I+D on chip per chip, 30 MB shared / 12 hw_tcache001 = cores notes_os_000 =Transparent Hugepage: disabled notes_os_005 = Transparent Hugepage is disabled by notes_os_010 = echo never > /sys/kernel/mm/redhat_transparent_hugepage/enabled